Explore the vast range of titles available.

The traditional perception that legumes would not be suitable for extrusion cooking is now completely outdated. In recent years, an increasing number of studies have been conducted to assess the behavior of various types of legume flours in extrusion cooking, proving that legumes have excellent potential for the production of extruded ready-to-eat foods by partially or totally replacing cereals. This review identifies the optimal processing conditions for legume-based and legume-added extruded foods, which allow the improvement of the expansion ratio and give the extrudates the spongy and crisp structure expected by consumers. In particular, the effect of the individual processing parameters on the physical-chemical and nutritional properties of the final product is highlighted. The extrusion cooking process, indeed, has a positive effect on nutritional characteristics, because it induces important modifications on starch and proteins, enhancing their digestibility, and reduces the content of trypsin inhibitors, lectins, phytic acid, and tannins, typically present in legumes. Therefore, the extrusion of legume flours is a viable strategy to improve their nutritional features while reducing home preparation time, so as to increase the consumption of these sustainable crops.

Gluten-free (GF) products, including pasta, are often characterised by nutritional deficiencies, such as scarce dietary fibre and excess of calories. Chickpea flour is increasingly being used by the food industries. Hulls, rich in dietary fibre and bioactive compounds, are discarded after milling. The aim of this work was to evaluate the quality features of short-cut GF fresh pasta added of hull (8% w/w) derived from kabuli (KH) or Apulian black (ABH) chickpeas, in comparison with control GF pasta prepared without hull. The enriched pasta, which could be labelled as “high fibre”, was characterised by a higher level of bioactive compounds and antioxidant activity than the control. ABH-enriched pasta showed the highest anthocyanins (33.37 ± 1.20 and 20.59 ± 0.11 mg/kg of cyanidin-3-O-glucoside on dry matter in raw and cooked pasta, respectively). Hull addition increased colour intensity and structural quality of GF pasta: ABH-enriched pasta had the lowest cooking loss and the highest water absorption capacity; KH-enriched pasta showed the highest firmness. No significant differences in sensory liking were found among the samples, except for “aftertaste”. Chickpea hull can be used as an innovative ingredient to produce potentially functional GF pasta, meeting the dietary needs of consumers without affecting quality.

Pea protein dry-fractionated (PDF), pea protein isolated (PIs), soy protein isolated (SIs) and oat protein (OP) were combined in four mixes (PDF_OP, PIs_OP, PDF_PIs_OP, SIs_OP) and extruded to produce meat analogues. The ingredients strongly influenced the process conditions and the use of PDF required higher specific mechanical energy and screw speed to create fibrous texture compared to PIs and SIs. PDF can be conveniently used to produce meat analogues with a protein content of 55 g 100 g−1, which is exploitable in meat-alternatives formulation. PDF-based meat analogues showed lower hardness (13.55–18.33 N) than those produced from PIs and SIs (nearly 27 N), probably due to a more porous structure given by the natural presence of carbohydrates in the dry-fractionated ingredient. PDF_OP and PIs_PDF_OP showed a significantly lower water absorption capacity than PIs OP and SIs_OP, whereas pea-based extrudates showed high oil absorption capacity, which could be convenient to facilitate the inclusion of oil and fat in the final formulation. The sensory evaluation highlighted an intense odor and taste profile of PDF_OP, whereas the extrudates produced by protein isolates had more neutral sensory characteristics. Overall, the use of dry-fractionated protein supports the strategies to efficiently produce clean-labeled and sustainable plant-based meat analogues.

The winemaking sector is one of the most productive worldwide, and thus it also generates large amounts of by-products with high environmental impacts. Furthermore, global market trends and government regulations promote industrial alternatives based on sustainable production processes. As a result, several studies have focused their attention on the reuse of grape by-products in the agro-food chain. Vine shoots, grape stalks, and wine lees, although produced to a lesser extent than grape pomace, have increasingly been receiving attention for their applications in the food sector, since they are a good source of functional and bioactive compounds. In this framework, our review highlights the promising results obtained by exploiting the antioxidant and/or antimicrobial activity of vine shoots, grape stalks, and wine lees or their extracts to replace the most common oenological additives and to assay the activity against food pathogens. Further, innovative functional foods and sustainable food packaging have been formulated by taking advantage of polyphenols and fiber, as well as plant bio-stimulants, in order to obtain grapes and wines with high quality characteristics. Overall, these by-products showed the potential to be recycled into the food chain as functional additives for different products and applications, supporting the sustainability of the winemaking sector.

Nowadays, it is crucial to adopt an integrated approach to improve the sustainability of the food system that covers the whole supply chain, from primary production to packaging and distribution [...]

Flatbreads are particularly prevalent in the Mediterranean region, including Italy, where each community has its unique traditional recipe, preparation method, and baking system. This traditional narrative review provides an overview of the Italian flatbreads that have achieved national or international quality recognitions. The aims of this study are, firstly, to scientifically evaluate these flatbreads and establishing a catalog that includes both technical and cultural information, which are currently missing in the international scientific literature and, secondly, to conduct a comparative analysis of the technical and cultural diversity of traditional Italian flatbreads, outlining areas for future research development. The examined flatbreads were found to be characterized by considerable diversity, reflecting the Italian region’s diverse culinary heritage. The formulation is generally simple and includes flour, water, possibly yeast, and salt. Additional ingredients are region dependent, reflecting local availability, and include fats of animal origin, or ham, mostly found in flatbreads from Northern Italy, while olive oil or EVOO is common in flatbreads of Tuscany, Liguria, and Sardinia. The types of flour also differ regionally: Besides soft wheat flour, durum wheat semolina is used in southern Italy and Sardinia, chestnut flour in Tuscany, rye flour in Alto Adige, chickpea flour in Liguria, and corn flour in central Italy. Historically, high-extraction flour and sourdough were largely used but have been replaced by refined flour and commercial baker’s yeast over time. Flash baking (short time, high temperature) is generally adopted, and some flatbreads, typical of Sardinia, are baked twice, resulting in complete dryness and long shelf-life. In contrast, quickly prepared unleavened bread is a staple in the Tuscan-Emilian Apennines, Lunigiana, and the Po Valley. Overall, these results suggest encouraging the revival of the ancient baking tradition of using high-extraction flours and sourdough fermentation, which today are almost lost. Reintroducing these methods could increase the fiber, mineral and, vitamin content and ensure a rich sensory profile. Further research could focus on improving the nutritional quality, particularly, through salt reduction, acrylamide levels mitigation, and protein content increase. The lack of historical information highlights the need to perform historical research to gain a deeper understanding of origins, evolution and characteristics of Italian flatbreads. Graphical Abstract

Broad beans (Vicia faba L.) are rarely consumed in Northern Europe and in the USA, whereas they are constantly present in the culinary habits of the Mediterranean and Middle Eastern countries. This grain legume is characterized by interesting nutritional properties because of high levels of complex carbohydrates, proteins, and dietary fiber, coupled with a low content of saturated lipids and the presence of several bioactive compounds. However, broad beans are much more than a cheap source of nutrients. Among the oldest domesticated legumes, they have also a cultural value linked to an ancient symbolic meaning. Generally associated with funerary rituals, broad beans have also a positive significance being “dead” seeds with a regenerative capacity. This review focuses on the social symbolism of broad bean consumption and its associated rituals. Furthermore, the culinary habits related to this legume are analyzed along different Mediterranean and Middle Eastern countries, from Egypt to Iran. Soups, thick gruels, and purees were found to be by far the most common culinary preparations. Using the Egyptian ful medames as a model, the study highlights a link between broad bean–based dishes in different countries, which arises from similar environmental conditions and from cultural interactions along trade routes. Enhancing the knowledge of these ethnic legume-based foods could improve the diet of Western countries by increasing the consumption of legumes.

Background: Mixtures play a key role in Food Science and Technology. For studying them, rational approaches should be used. In detail, the experimental designs for mixtures are useful tools for studying the effects of ingredients/components in formulations. Results: Food Science and Technology is the fourth category among the total records considered in this review. The applications span from food formulation to the composition of modified atmosphere, shelf-life improvement and bioactives extraction. However, the majority of the studies regards few products and ingredients. Simplex-lattice and simplex-centroid designs are the most common used, although some optimal designs, such as the D-optimal, have also interesting applications. Finally, some issues are highlighted, which basically regard the interpretation of the models coefficients and the lack of model validation. Conclusion: In the last decade, mixture designs have been fairly used in the field of Food Science and Technology. Modeling the response(s) allows researchers to achieve a global knowledge of the system under study within the defined experimental domain. However, the majority of application has regarded limited classes of products, and thus an increase in the spectrum of applications is desired.

Upcycling food industry by-products has become a topic of interest within the framework of the circular economy, to minimize environmental impact and the waste of resources. This research aimed at verifying the effectiveness of using almond skins, a by-product of the confectionery industry, in the preparation of functional biscuits with improved nutritional properties. Almond skins were added at 10 g/100 g (AS10) and 20 g/100 g (AS20) to a wheat flour basis. The protein content was not influenced, whereas lipids and dietary fiber significantly increased (p < 0.05), the latter meeting the requirements for applying “source of fiber” and “high in fiber” claims to AS10 and AS20 biscuits, respectively. The addition of almond skins altered biscuit color, lowering L* and b* and increasing a*, but improved friability. The biscuits showed sensory differences in color, odor and textural descriptors. The total sum of single phenolic compounds, determined by HPLC, was higher (p < 0.05) in AS10 (97.84 µg/g) and AS20 (132.18 µg/g) than in control (73.97 µg/g). The antioxidant activity showed the same trend as the phenolic. The p-hydroxy benzoic and protocatechuic acids showed the largest increase. The suggested strategy is a practical example of upcycling when preparing a health-oriented food product.

Legume protein ingredients are receiving continuous interest for their potential to formulate plant-based dairy analogs. In this study, a legume-based slurry was produced from an Apulian black chickpeas (BCP) protein concentrate and fermented with three starter cultures, Streptococcus thermophilus (ST), a co-culture of ST with Lactococcus lactis (STLL) and a co-culture of ST with Lactobacillus plantarum (STLP). The effect of fermentation on the biochemical, texture and sensorial parameters was evaluated. The same beverage without inoculum was used as a control (CTRL). All the obtained fermented beverages were characterized by high protein (120.00 g kg−1) and low-fat contents (17.12 g kg−1). Fermentation contributed to a decrease in the contents of phytic acid by 10 to 79% and saturated fatty acids by 30 to 43%, with the STLP fermentation exercising the major effect. The three culture starters influenced the texture and sensorial attributes and the profile of the volatile compounds differently. Fermentation increased the lightness, consistency, cohesivity and viscosity of the formulated beverages. On a sensorial level, STLL had a major effect on the acidity, sourness and astringency, while both ST and STLP affected the creaminess, solubility and stickiness. Legumes and grass aromas were masked in LAB-fermented samples, probably due to a new VOC formation. The functional properties of LAB fermentation, along with the high protein content of the black chickpeas concentrate, provide the opportunity to formulate a clean label and safe plant-based fermented beverage with higher nutritional value compared to the others currently found in the market.