Explore the vast range of titles available.

The propensity of metals to form irregular and nonplanar electrodeposits at liquid-solid interfaces has emerged as a fundamental barrier to high-energy, rechargeable batteries that use metal anodes. We report an epitaxial mechanism to regulate nucleation, growth, and reversibility of metal anodes. The crystallographic, surface texturing, and electrochemical criteria for reversible epitaxial electrodeposition of metals are defined and their effectiveness demonstrated by using zinc (Zn), a safe, low-cost, and energy-dense battery anode material. Graphene, with a low lattice mismatch for Zn, is shown to be effective in driving deposition of Zn with a locked crystallographic orientation relation. The resultant epitaxial Zn anodes achieve exceptional reversibility over thousands of cycles at moderate and high rates. Reversible electrochemical epitaxy of metals provides a general pathway toward energy-dense batteries with high reversibility.

Spinel transition metal oxides (TMOs) have emerged as promising anode materials for lithium-ion batteries. It has been shown that reducing their particle size to nanoscale dimensions benefits overall electrochemical performance. Here, we use in situ transmission electron microscopy to probe the lithiation behavior of spinel ZnFe 2 O 4 as a function of particle size. We have found that ZnFe 2 O 4 undergoes an intercalation-to-conversion reaction sequence, with the initial intercalation process being size dependent. Larger ZnFe 2 O 4 particles (40 nm) follow a two-phase intercalation reaction. In contrast, a solid-solution transformation dominates the early stages of discharge when the particle size is about 6–9 nm. Using a thermodynamic analysis, we find that the size-dependent kinetics originate from the interfacial energy between the two phases. Furthermore, the conversion reaction in both large and small particles favors {111} planes and follows a core-shell reaction mode. These results elucidate the intrinsic mechanism that permits fast reaction kinetics in smaller nanoparticles. Reducing particle size of electrode materials to nanoscale dimensions is believed responsible for their enhanced reaction kinetics and electrochemical performance. Here, the authors use in situ transmission electron microscopy to study the dynamic process of the spinel zinc ferrite nanoparticles as a function of size, finding that the intercalation reaction pathway changes below a critical particle size.

Some types of batteries contain both a transition metal reducible metal, such as the cathode material Ag2VP2O8. During operation, both Ag and V ions are reduced, and the Ag atoms can form wires to enhance the internal conductivity. Kirshenbaum et al. probe the discharge of a battery at different rates and track the formation of Ag atoms using in situ energy-dispersive x-ray diffraction (see the Perspective by Dudney and Li). They show how the discharge rate affects whether the Ag or V is preferentially reduced and also the distribution of the Ag atoms, and then correlate this to the loss of battery capacity at higher discharge rates. Science, this issue p. 149; see also p. 131 The functional capacity of a battery is observed to decrease, often quite dramatically, as discharge rate demands increase. These capacity losses have been attributed to limited ion access and low electrical conductivity, resulting in incomplete electrode use. A strategy to improve electronic conductivity is the design of bimetallic materials that generate a silver matrix in situ during cathode reduction. Ex situ x-ray absorption spectroscopy coupled with in situ energy-dispersive x-ray diffraction measurements on intact lithium/silver vanadium diphosphate (Li/Ag2VP2O8) electrochemical cells demonstrate that the metal center preferentially reduced and its location in the bimetallic cathode are rate-dependent, affecting cell impedance. This work illustrates that spatial imaging as a function of discharge rate can provide needed insights toward improving realizable capacity of bimetallic cathode systems.

Multiple lithium-ion transport pathways and local phase changes upon lithiation in silver hollandite are revealed via in situ microscopy including electron diffraction, imaging and spectroscopy, coupled with density functional theory and phase field calculations. We report unexpected inter-nanorod lithium-ion transport, where the reaction fronts and kinetics are maintained within the neighbouring nanorod. Notably, this is the first time-resolved visualization of lithium-ion transport within and between individual nanorods, where the impact of oxygen deficiencies is delineated. Initially, fast lithium-ion transport is observed along the long axis with small net volume change, resulting in two lithiated silver hollandite phases distinguishable by orthorhombic distortion. Subsequently, a slower reaction front is observed, with formation of polyphase lithiated silver hollandite and face-centred-cubic silver metal with substantial volume expansion. These results indicate lithium-ion transport is not confined within a single nanorod and may provide a paradigm shift for one-dimensional tunnelled materials, particularly towards achieving high-rate capability. Hollandite structured materials are potentially useful for battery technologies. Here the authors report the unusual lateral transport of lithium ions between lithiated silver manages oxide nanorods where the reaction fronts and kinetics are maintained within the neighbouring nanorods.

In times of crisis, including the current COVID-19 pandemic, the supply chain of filtering facepiece respirators, such as N95 respirators, are disrupted. To combat shortages of N95 respirators, many institutions were forced to decontaminate and reuse respirators. While several reports have evaluated the impact on filtration as a measurement of preservation of respirator function after decontamination, the equally important fact of maintaining proper fit to the users’ face has been understudied. In the current study, we demonstrate the complete inactivation of SARS-CoV-2 and preservation of fit test performance of N95 respirators following treatment with dry heat. We apply scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction (XRD) measurements, Raman spectroscopy, and contact angle measurements to analyze filter material changes as a consequence of different decontamination treatments. We further compared the integrity of the respirator after autoclaving versus dry heat treatment via quantitative fit testing and found that autoclaving, but not dry heat, causes the fit of the respirator onto the users face to fail, thereby rendering the decontaminated respirator unusable. Our findings highlight the importance to account for both efficacy of disinfection and mask fit when reprocessing respirators to for clinical redeployment.

A bottleneck for the large-scale application of today’s batteries is low lithium storage capacity, largely due to the use of intercalation-type electrodes that allow one or less electron transfer per redox center. An appealing alternative is multi-electron transfer electrodes, offering excess capacity, which, however, involves conversion reaction; according to conventional wisdom, the host would collapse during the process, causing cycling instability. Here, we report real-time observation of topotactic reaction throughout the multi-electron transfer process in magnetite, unveiled by in situ single-crystal crystallography with corroboration of first principles calculations. Contradicting the traditional belief of causing structural breakdown, conversion in magnetite resembles an intercalation process—proceeding via topotactic reaction with the cubic close packed oxygen-anion framework retained. The findings from this study, with unique insights into enabling  multi-electron transfer via topotactic reaction, and its implications to the cyclability and rate capability, shed light on designing viable multi-electron transfer electrodes for high energy batteries. In contrast to the conventional wisdom on conversion-driven structural collapse of the host, this work shows that lithium conversion in magnetite resembles the intercalation process, going via topotactic reactions, thereby enabling multi-electron transfer and high reversible capacity.

As one of the prevailing energy storage systems, lithium-ion batteries (LIBs) have become an essential pillar in electric vehicles (EVs) during the past decade, contributing significantly to a carbon-neutral future. However, the complete transition to electric vehicles requires LIBs with yet higher energy and power densities. Here, we propose an effective methodology via controlled nanosheet self-assembly to prepare low-tortuosity yet high-density and high-toughness thick electrodes. By introducing a delicate densification in a three-dimensionally interconnected nanosheet network to maintain its vertical architecture, facile electron and ion transports are enabled despite their high packing density. This dense and thick electrode is capable of delivering a high volumetric capacity >1,600 mAh cm−3, with an areal capacity up to 32 mAh cm−2, which is among the best reported in the literature. The high-performance electrodes with superior mechanical and electrochemical properties demonstrated in this work provide a potentially universal methodology in designing advanced battery electrodes with versatile anisotropic properties.

Nanomaterials have found use in a number of relevant energy applications. In particular, nanoscale motifs of binary metal sulfides can function as conversion materials, similar to that of analogous metal oxides, nitrides, or phosphides, and are characterized by their high theoretical capacity and correspondingly low cost. This review focuses on structure–composition–property relationships of specific relevance to battery applications, emanating from systematic attempts to either (1) vary and alter the dimension of nanoscale architectures or (2) introduce conductive carbon-based entities, such as carbon nanotubes and graphene-derived species. In this study, we will primarily concern ourselves with probing metal sulfide nanostructures generated by a microwave-mediated synthetic approach, which we have explored extensively in recent years. This particular fabrication protocol represents a relatively facile, flexible, and effective means with which to simultaneously control both chemical composition and physical morphology within these systems to tailor them for energy storage applications.

Dorsal and ventral aspects of the eye are distinct from the early stages of development. The developing eye cup grows dorsally, and the choroidal fissure is formed on its ventral side. Retinal axons from the dorsal and ventral retina project to the ventral and dorsal tectum, respectively. Misexpression of the Tbx5 gene induced dorsalization of the ventral side of the eye and altered projections of retinal ganglion cell axons. Thus, Tbx5 is involved in eye morphogenesis and is a topographic determinant of the visual projections between retina and tectum.

Although Li-based batteries have established a dominant role in the current energy-storage landscape, post-Li chemistries (for example, Al or Zn) are emerging as promising candidates for next-generation rechargeable batteries. Electrochemical cells using Al or Zn metal as the negative electrode are of interest for their potential low cost, intrinsic safety and sustainability. Presently, such cells are considered impractical because the reversibility of the metal anode is poor and the amount of charge stored is miniscule. Here we report that electrodes designed to promote strong oxygen-mediated chemical bonding between Al deposits and the substrate enable a fine control of deposition morphology and provide exceptional reversibility (99.6–99.8%). The reversibility is sustained over unusually long cycling times (>3,600 hours) and at areal capacities up to two orders of magnitude higher than previously reported values. We show that these traits result from the elimination of fragile electron transport pathways, and the non-planar deposition of Al via specific metal–substrate chemical bonding. Using metal anodes could in principle boost the energy density of batteries but their electrodeposition often negatively impacts battery performance. Here the authors propose an oxygen-mediated metal–substrate bonding strategy to regulate metal deposition and demonstrate highly reversible Al and Zn anodes.