Explore the vast range of titles available.

Background Over the last two or three decades, the pace of development of treatments for osteosarcoma tends has been slow. Novel effective therapies for osteosarcoma are still lacking. Previously, we reported that tumor-suppressing STF cDNA 3 ( TSSC3 ) functions as an imprinted tumor suppressor gene in osteosarcoma; however, the underlying mechanism by which TSSC3 suppresses the tumorigenesis and metastasis remain unclear. Methods We investigated the dynamic expression patterns of TSSC3 and autophagy-related proteins (autophagy related 5 (ATG5) and P62) in 33 human benign bone tumors and 58 osteosarcoma tissues using immunohistochemistry. We further investigated the correlations between TSSC3 and autophagy in osteosarcoma using western blotting and transmission electronic microscopy. CCK-8, Edu, and clone formation assays; wound healing and Transwell assays; PCR; immunohistochemistry; immunofluorescence; and western blotting were used to investigated the responses in TSSC3-overexpressing osteosarcoma cell lines, and in xenografts and metastasis in vivo models, with or without autophagy deficiency caused by chloroquine or ATG5 silencing. Results We found that ATG5 expression correlated positively with TSSC3 expression in human osteosarcoma tissues. We demonstrated that TSSC3 was an independent prognostic marker for overall survival in osteosarcoma, and positive ATG5 expression associated with positive TSSC3 expression suggested a favorable prognosis for patients. Then, we showed that TSSC3 overexpression enhanced autophagy via inactivating the Src-mediated PI3K/Akt/mTOR pathway in osteosarcoma. Further results suggested autophagy contributed to TSSC3-induced suppression of tumorigenesis and metastasis in osteosarcoma in vitro and in vivo models. Conclusions Our findings highlighted, for the first time, the importance of autophagy as an underlying mechanism in TSSC3-induced antitumor effects in osteosarcoma. We also revealed that TSSC3-associated positive ATG5 expression might be a potential predictor of favorable prognosis in patients with osteosarcoma.

In this paper, simulations of deep drawing tests at elevated temperatures were carried out with experimental validation. The aim of this work was to study the effect of process parameters on formability and mechanical properties of aluminum alloy 7075 in hot stamping process.Process parameters, including blank temperature, stamping speed, blank holder force and friction coefficient, were studied. Stamping tests were conducted at temperatures between 350 and 500 ℃, blank holder force between 0 and 10 kN, stamping speed between 50 and 150 mm·s^-1, and friction coefficient between 0.1 and 0.3. Based on the analysis, it is shown that thickness homogeneity could be improved when the blank is formed at lower temperature,lower blank holder force and lower friction coefficient.Formability could be improved when the blank was well lubricated at about 400 ℃. Formability at stamping speed 50 mm·s^-1 is far better than those at other speeds. The mechanical property analysis shows that the hot stamping process could make the formed part to obtain high quality.

Recent research has indicated that Long noncoding RNAs (LncRNAs) are crucial in many disorders, especially tumors. However, the exact role of LncRNA XLOC_006786 (LncRNA-SPIDR-2:1) in malignancies, especially in human osteosarcoma, is unclear. The results of RT‒qPCR, western blotting, CCK-8 assays, and Transwell assays showed that LncRNA XLOC_006786 inhibited osteosarcoma cell proliferation, invasion, and migration, indicating that it may be a tumor suppressor gene in osteosarcoma. We found that LncRNA XLOC_006786 negatively regulated NOTCH3, which is an oncogenic gene in osteosarcoma, as we previously reported. Bioinformatics analysis showed that miR-491-5p may be a direct target of LncRNA XLOC_006786, while NOTCH3 is a key target of miR-491-5p. Then, we verified that LncRNA XLOC_006786 could prevent lung metastatic osteosarcoma in vivo. Taken together, our research showed that LncRNA XLOC_006786 suppresses osteosarcoma proliferation, invasion, and metastasis through the NOTCH3 signaling pathway by targeting miR-491-5p.

To simulate sheet metal forming processes precisely, an in-house dynamic explicit code was developed to apply a new solid-shell element to sheet metal forming analyses, with a corotational coordinate system utilized to simplify the nonlinearity and to integrate the element with anisotropic constitutive laws. The enhancing parameter of the solid-shell element, implemented to circumvent the volumetric and thickness locking phenomena, was condensed into an explicit form. To avoid the rank deficiency, a modified physical stabilization involving the B-bar method and reconstruction of transverse shear components was adopted. For computational efficiency of the solid-shell element in numerical applications, an adaptive mesh subdivision scheme was developed, with element geometry and contact condition taken as subdivision criteria. To accurately capture the anisotropic behavior of sheet metals, material models with three different anisotropic yield functions were incorporated. Several numerical examples were carried out to validate the accuracy of the proposed element and the efficiency of the adaptive mesh subdivision.

Notch signaling abnormalities are associated with the development of various tumors, including hematopoietic and epithelium-derived tumors. However, the role of Notch signaling in tumors originating from mesenchymal cells is unclear. The effect of Notch3 expression on the prognosis of osteosarcoma and its role and mechanism in osteosarcoma cells have never been reported. In this study, we performed a clinicopathological analysis of 70 cases of osteosarcoma, with primary focus on survival. Osteosarcoma cell lines MTH and U2OS were used. After knockdown of Notch3 by lentiviral transfection and siRNA, the cell cycle, cell viability, and wound healing capacity were assessed. Subsequently, the Transwell assay was performed, and the expression levels of hairy and enhancer of split-1 (Hes1) and matrix metalloproteinase 7 (MMP7) were detected by RT-PCR and Western blot assay. The expression of MMP7 was also detected after knockdown of Hes1. Animal experiments were performed by injecting the cell lines MTH of Notch3 knockdown into mice tail veins and comparing the development of lung metastasis with the control group. Comparison of survival curves showed that Notch3 expression significantly impacts patient survival. Additionally, multivariate analysis revealed that Notch3 is an independent prognostic factor for osteosarcoma. In in vivo experiments, osteosarcoma-associated pulmonary metastasis in nude mice was reduced after Notch3 silencing. The expression of downstream effector molecule, Hes1, and that of the invasion and metastasis-associated proteolytic enzyme, MMP7, were reduced, and MMP7 was further decreased by Hes1 knockdown in in vitro experiments. Notch3 is a prognostic factor for osteosarcoma and might regulate its invasion and metastasis through the downstream target gene and effector MMP7.

Background Clear cell renal cell carcinoma (ccRCC) is an aggressive subtype of renal cell carcinoma. X‐C motif chemokine receptor 1 (XCR1) exerts important roles in tumor progression; however, its role in ccRCC is unclear. Methods We utilized publicly available data from The Cancer Genome Atlas (TCGA) to assess the role of XCR1 in ccRCC and validated the results in 36 samples from patients with ccRCC who underwent curative resection in Xinqiao Hospital Chongqing. XCR1 overexpression was identified in ccRCC, which was confirmed by qRT‐PCR assay and immunohistochemical staining of ccRCC samples. Results For the TCGA and clinical data, Kaplan–Meier survival analysis revealed that higher XCR1 expression in ccRCC was related to longer overall survival. Cox regression analysis suggested that XCR1 is an independent risk factor for ccRCC. GSEA analysis suggested that XCR1 is associated with the JAK/STAT signaling pathway. XCR1 knockdown by small interfering RNA (siRNA) significantly increased ccRCC cell proliferation and migration, and decreased cell apoptosis. Conclusion We found higher XCR1 expression in ccRCC compared with that in normal tissues is related to longer overall survival in patients with ccRCC. XCR1 knockdown significantly increased RCC cells proliferation and migration, and decreased apoptosis. XCR1 might be used as a prognostic biomarker in ccRCC in the future. We found higher XCR1 expression in ccRCC compared with that in normal tissues is related to longer overall survival in patients with ccRCC. XCR1 knockdown significantly increased RCC cells proliferation and migration, and decreased apoptosis. XCR1 might be used as a prognostic biomarker in ccRCC in the future.

Metastasis is the primary cause of high mortality in patients with osteosarcoma (OS). However, the molecular mechanisms underlying the regulation of metastatic disease are yet to be determined. Differentially expressed in FDCP 6 homolog (DEF6) has been demonstrated to be correlated with the metastatic behavior of several cancers, such as breast, ovarian and colorectal cancers. However, the role of DEF6 in OS remains unknown. Accordingly, the current study aimed to investigate the relationship between DEF6 expression and the malignant behavior of OS. The results revealed that high levels of DEF6 in OS tissues were associated with advanced clinical stage and metastases. Furthermore, immunohistochemistry results predicted a poor prognosis in 58 human OS specimens. Additionally, DEF6 expression was reported to be upregulated in human OS cell lines compared with a normal osteoblast cell line. small interfering RNA transfection, cell proliferation and colony formation assays, wound healing assays and Transwell assays were performed. DEF6 was not identified to be a major driver of OS cell proliferation, but it significantly contributed to metastatic potential in vitro. In addition, bioinformatics, western blotting and immunohistochemistry results indicated that MMP9 expression was positively correlated with DEF6 expression in human OS. To summarize, the results revealed that increased levels of DEF6 were associated with metastasis and poor prognosis in human OS and that DEF6 expression is positively correlated with MMP9 expression. The results indicated that DEF6 may serve as a potential antimetastatic target for OS.

In this paper, simulations of deep drawing tests at elevated temperatures were carried out with experimental validation. The aim of this work was to study the effect of process parameters on formability and mechanical properties of aluminum alloy 7075 in hot stamping process.Process parameters, including blank temperature, stamping speed, blank holder force and friction coefficient, were studied. Stamping tests were conducted at temperatures between 350 and 500 ℃, blank holder force between 0 and 10 kN, stamping speed between 50 and 150 mm·s-1, and friction coefficient between 0.1 and 0.3. Based on the analysis, it is shown that thickness homogeneity could be improved when the blank is formed at lower temperature,lower blank holder force and lower friction coefficient.Formability could be improved when the blank was well lubricated at about 400 ℃. Formability at stamping speed 50 mm·s-1 is far better than those at other speeds. The mechanical property analysis shows that the hot stamping process could make the formed part to obtain high quality.

INTRODUCTION There is consensus that organ transplantation is an optimal way to address organ failure, and organ donation is becoming increasingly accepted. Unfortunately, little attention has been paid to the families of deceased donors, especially with respect to anxiety and depression.