Explore the vast range of titles available.

The management and exploitation of knowledge can contribute to the competitive advantage of an organisation and hence can be a driver of its value. This paper examines knowledge management practices within two engineering organisations with an emphasis on barriers to its effectiveness and the influence of current and anticipated deployment of digital technologies. Two methods were used to gather research data across both organisations by combining a series of semi-structured interviews with a quantitative social network analysis. Examination of the acquired data provided insights into the relationship between the knowledge management culture in both organisations and their adoption of digital tools. Hudson’s evolutionary model of safety culture has been modified to describe the culture of knowledge management in an organisation and the acquired data used to locate the two organisations on their knowledge management journey. It is proposed that social networks could be used as an indicator of the stage of evolution of knowledge management in engineering organisations more generally with low network densities and dispersed networks representing higher stages of evolution.

Southern India lies in an area of Gondwana where multiple blocks are juxtaposed along Moho-penetrating structures, the significance of which are not well understood. Adequate geochronological data that can be used to differentiate the various blocks are also lacking. We present a newly acquired SIMS U–Pb, Lu–Hf, O isotopic and trace element geochemical dataset from zircon and garnet from the protoliths of the Nagercoil Block at the very tip of southern India. The data indicate that the magmatic protoliths of the rocks in this block formed at c. 2040 Ma with Lu–Hf, O-isotope and trace element data consistent with formation in a magmatic arc environment. The zircon data from Nagercoil Block are isotopically and temporally distinct from those in all the other blocks in southern India, but remarkably correspond to rocks in East Africa that are exposed on the southern margin of the Tanzania–Bangweulu Block. The new data suggest that the tip of southern India has an African affinity and a major suture zone must lie along its northern margin. All of these blocks were finally brought together during the Ediacaran-Cambrian amalgamation of Gondwana where they underwent high to ultrahigh temperature metamorphism.

We report the small-signal characterization of a PCSEL device, extracting damping factors and modulation efficiencies, and demonstrating -3 dB modulation bandwidths of up to 4.26 GHz. Based on modelling we show that, by reducing the device width and improving the active region design for high-speed modulation, direct modulation frequencies in excess of 50 GHz are achievable.

A solution for the nuclear waste problem is the key challenge for an extensive use of nuclear reactors as a major carbon free, sustainable, and applied highly reliable energy source. Partitioning and Transmutation (P&T) promises a solution for improved waste management. Current strategies rely on systems designed in the 60's for the massive production of plutonium. We propose an innovative strategic development plan based on invention and innovation described with the concept of developments in s-curves identifying the current boundary conditions, and the evolvable objectives. This leads to the ultimate, universal vision for energy production characterized by minimal use of resources and production of waste, while being economically affordable and safe, secure and reliable in operation. This vision is transformed into a mission for a disruptive development of the future nuclear energy system operated by burning of existing spent nuclear fuel (SNF) without prior reprocessing. This highly innovative approach fulfils the sustainability goals and creates new options for P&T. A proof on the feasibility from neutronic point of view is given demonstrating sufficient breeding of fissile material from the inserted SNF. The system does neither require new resources nor produce additional waste, thus it provides a highly sustainable option for a future nuclear system fulfilling the requests of P&T as side effect. In addition, this nuclear system provides enhanced resistance against misuse of Pu and a significantly reduced fuel cycle. However, the new system requires a demand driven rethinking of the separation process to be efficient.

The commoditization of nuclear power through the factory production of sealed micro-power units within a digitally enabled holistic assurance framework is described. This would revolutionize nuclear power-plant design, construction, operation and decommissioning through a paradigm shift to manufacture–operate–remove–recycle (MORR). The potential impact of recent research on an integrated nuclear digital environment for large bespoke nuclear power plants and the design, build and operation of fusion power plants using such a digital environment is explored. These strands are interwoven to discuss the technical, economic and socio-political implications of MORR in the context of micro-reactors and to consider the potential evolution of safeguarding issues based on a digital assurance framework that leads to type approvals. Commoditization of nuclear power would lower costs in line with offshore wind and the output from a single production line in a factory could replace a third of current fossil fuel-based electricity generation in the UK over a 15-year period, making a significant contribution to achieving zero greenhouse gas emissions. The challenges associated with the changes in culture, both in the nuclear industry and in society, as well as the technology gaps, that need to be addressed in realizing this paradigm shift are identified and discussed.

The quarry at Kottavattom in the Trivandrum Block of southern India contains spectacular examples of fluid-assisted alteration of high-grade metamorphic rocks. Garnet-biotite gneiss has undergone a change in mineral assemblage to form submetre scale orthopyroxene-bearing patches, later retrogressed to form an amphibole-bearing lithology. These patches, often referred to as arrested or incipient charnockite, crosscut the original metamorphic foliation and are typically attributed to passage of a low a H 2 O fluid through the rock. Whilst this conversion is recognised as a late stage process, little detailed chronological work exists to link it temporally to metamorphism in the region. Zircon and monazite analysed from Kottavattom not only record metamorphism in the Trivandrum Block but also show internal, lobate textures crosscutting the original zoning, consistent with fluid-aided coupled dissolution-reprecipitation during formation of the orthopyroxene-bearing patches. High-grade metamorphism at the quarry occurred between the formation of metamorphic monazite at ~585 Ma and the growth of metamorphic zircon at ~523 Ma. The fluid-assisted alteration of the garnet-biotite gneiss is poorly recorded by altered zircon with only minimal resetting of the U–Pb system, whereas monazite has in some cases undergone complete U–Pb resetting and records an age for fluid infiltration at ~495 Ma. The fluid event therefore places the formation of the altered patches at least 25 Myr after the zircon crystallisation in the garnet-biotite gneiss. The most likely fluid composition causing the modification and U–Pb resetting of zircon and monazite is locally derived hypersaline brine.

Background Cardiovascular disease (CVD) and diabetes mellitus are major health issues in Tonga and other Pacific countries, although mortality levels and trends are unclear. We assess the impacts of cause-of-death certification on coding of CVD and diabetes as underlying causes of death (UCoD). Methods Tongan records containing cause-of-death data (2001–2018), including medical certificates of cause-of-death (MCCD), had UCoD assigned according to International Classification of Diseases 10th revision (ICD-10) coding rules. Deaths without recorded cause were included to ascertain total mortality. Diabetes and hypertension causes were reallocated from Part 1 of the MCCD (direct cause) to Part 2 (contributory cause) if potentially fatal complications were not recorded, and an alternative UCoD was assigned. Proportional mortality by cause based on the alternative UCoD were applied to total deaths then mortality rates calculated by age and sex using census/intercensal population estimates. CVD and diabetes mortality rates for unaltered and alternative UCoD were compared using Poisson regression. Results Over 2001–18, in ages 35–59 years, alternative CVD mortality was higher than unaltered CVD mortality in men ( p  = 0.043) and women ( p  = 0.15); for 2010–18, alternative versus unaltered measures in men were 3.3/10 3 (95%CI: 3.0–3.7/10 3 ) versus 2.9/10 3 (95%CI: 2.6–3.2/10 3 ), and in women were 1.1/10 3 (95%CI: 0.9–1.3/10 3 ) versus 0.9/10 3 (95%CI: 0.8–1.1/10 3 ). Conversely, alternative diabetes mortality rates were significantly lower than the unaltered rates over 2001–18 in men ( p  < 0.0001) and women ( p  = 0.013); for 2010–18, these measures in men were 1.3/10 3 (95%CI: 1.1–1.5/10 3 ) versus 1.9/10 3 (95%CI: 1.6–2.2/10 3 ), and in women were 1.4/10 3 (95%CI: 1.2–1.7/10 3 ) versus 1.7/10 3 (95%CI: 1.5–2.0/10 3 ). Diabetes mortality rates increased significantly over 2001–18 in men (unaltered: p  < 0.0001; alternative: p  = 0.0007) and increased overall in women (unaltered: p  = 0.0015; alternative: p  = 0.014). Conclusions Diabetes reporting in Part 1 of the MCCD, without potentially fatal diabetes complications, has led to over-estimation of diabetes, and under-estimation of CVD, as UCoD in Tonga. This indicates the importance of controlling various modifiable risks for atherosclerotic CVD (including stroke) including hypertension, tobacco use, and saturated fat intake, besides obesity and diabetes. Accurate certification of diabetes as a direct cause of death (Part 1) or contributory factor (Part 2) is needed to ensure that valid UCoD are assigned. Examination of multiple cause-of-death data can improve understanding of the underlying causes of premature mortality to better inform health planning.

Zircon crystals from the Jack Hills, Western Australia, are one of the few surviving mineralogical records of Earth’s first 500 million years and have been proposed to contain a paleomagnetic record of the Hadean geodynamo. A prerequisite for the preservation of Hadean magnetization is the presence of primary magnetic inclusions within pristine igneous zircon. To date no images of the magnetic recorders within ancient zircon have been presented. Here we use high-resolution transmission electron microscopy to demonstrate that all observed inclusions are secondary features formed via two distinct mechanisms. Magnetite is produced via a pipe-diffusion mechanism whereby iron diffuses into radiation-damaged zircon along the cores of dislocations and is precipitated inside nanopores and also during low-temperature recrystallization of radiation-damaged zircon in the presence of an aqueous fluid. Although these magnetites can be recognized as secondary using transmission electron microscopy, they otherwise occur in regions that are indistinguishable from pristine igneous zircon and carry remanent magnetization that postdates the crystallization age by at least several hundred million years. Without microscopic evidence ruling out secondary magnetite, the paleomagnetic case for a Hadean–Eoarchean geodynamo cannot yet been made.

The Achankovil Zone of southern India forms a distinct isotopic and structural boundary separating the Madurai Block to the north from the Trivandrum Block to the south. We combine isotopic and trace element geochemistry of major and accessory phases with phase equilibria modelling to provide quantitative constraints on the timing and conditions of peak metamorphism and the nature of the protoliths within the Achankovil Zone. The results suggest a clockwise pressure–temperature path with peak metamorphic temperatures of up to 950 °C at pressures of around 0.7 GPa followed by high-temperature decompression. The metamorphic peak occurred at 545–512 Ma. U–Pb and Hf isotopic analysis of detrital zircon shows that the rocks have a strong affinity with the southern part of the Madurai Block. The Achankovil Zone is interpreted as the reworked southern margin of the Madurai Block, which was metamorphosed during the final stages of the assembly of Gondwana.

Oceanic cyanobacteria are the most abundant oxygen-generating phototrophs on our planet and are therefore important to life. These organisms are infected by viruses called cyanophages, which have recently shown to encode metabolic genes that modulate host photosynthesis, phosphorus cycling and nucleotide metabolism. Herein we report the characterization of a wild-type flavin-dependent viral halogenase (VirX1) from a cyanophage. Notably, halogenases have been previously associated with secondary metabolism, tailoring natural products. Exploration of this viral halogenase reveals it capable of regioselective halogenation of a diverse range of substrates with a preference for forming aryl iodide species; this has potential implications for the metabolism of the infected host. Until recently, a flavin-dependent halogenase that is capable of iodination in vitro had not been reported. VirX1 is interesting from a biocatalytic perspective as it shows strikingly broad substrate flexibility and a clear preference for iodination, as illustrated by kinetic analysis. These factors together render it an attractive tool for synthesis. A flavin-dependent halogenase with a remarkable preference for iodination has now been discovered. The halogenase (VirX1) was discovered using a bioinformatics-based approach and comes from a cyanophage. Structural characterization and kinetic studies show that VirX1 possesses broad substrate tolerance, making it an attractive tool for synthesis.