Explore the vast range of titles available.

Breast cancer remains the most common type of cancer, occurring in middle-aged women, and often leads to patients’ death. In this work, we applied a cold atmospheric pressure plasma (CAPP)-based reaction-discharge system, one that is unique in its class, for the production of CAPP-activated media (DMEM and Opti-MEM); it is intended for further uses in breast cancer treatment. To reach this aim, different volumes of DMEM or Opti-MEM were treated by CAPP. Prepared media were exposed to the CAPP treatment at seven different time intervals and examined in respect of their impact on cell viability and motility, and the induction of the apoptosis in human non-metastatic (MCF7) and metastatic (MDA-MB-231) breast cancer cell lines. As a control, the influence of CAPP-activated media on the viability and motility, and the type of the cell death of the non-cancerous human normal MCF10A cell line, was estimated. Additionally, qualitative and quantitative analyses of the reactive oxygen and nitrogen species (RONS), generated during the CAPP operation in contact with analyzed media, were performed. Based on the conducted research, it was found that 180 s (media activation time by CAPP) should be considered as the minimal toxic dose, which significantly decreases the cell viability and the migration of MDA-MB-231 cells, and also disturbs life processes of MCF7 cells. Finally, CAPP-activated media led to the apoptosis of analyzed cell lines, especially of the metastatic MDA-MB-231 cell line. Therefore, the application of the CAPP system may be potentially applied as a therapeutic strategy for the management of highly metastatic human breast cancer.

Additive manufacturing (AM) of hot-work tool steels such as H13 offers unique opportunities for producing complex, conformally cooled tools with reduced production time and material waste. In this study, five metal AM technologies—Fused Deposition Modeling and Sintering (FDMS, Desktop Metal Studio System and Zetamix), Binder Jetting (BJ), Laser Powder Bed Fusion (LPBF), and Directed Energy Deposition (DED)—were compared in terms of microstructure, porosity, and post-processing heat treatment response. The as-printed microstructures revealed distinct differences among the technologies: FDMS and BJ exhibited high porosity (6–9%), whereas LPBF and DED achieved near-full densification (<0.1%). Samples with sufficiently low porosity (BJ, LPBF, DED) were subjected to tempering and quenching treatments to evaluate hardness evolution and microstructural transformations. The satisfactory post-treatment hardness was observed in both tempered and quenched and tempered BJ samples, associated with secondary carbide precipitation, while LPBF and DED samples retained stable martensitic structures with hardness around 600 HV0.5. Microstructural analyses confirmed the dependence of phase morphology and carbide distribution on the thermal history intrinsic to each AM process. The study demonstrates that while FDMS and BJ are more accessible and cost-effective for low-density prototypes, LPBF and DED offer superior density and mechanical integrity suitable for functional tooling applications.

Doxycycline (DOX), an antibiotic commonly used in medicine and veterinary, is frequently detected in natural waterways. Exposition of bacteria to DOX residuals poses a selective pressure leading to a common occurrence of DOX-resistance genetic determinants among microorganisms, including virulent human pathogens. In view of diminishment of the available therapeutic options, we developed a continuous-flow reaction-discharge system generating pulse-modulated radio-frequency atmospheric pressure glow discharge (pm-rf-APGD) intended for DOX removal from liquid solutions. A Design of Experiment and a Response Surface Methodology were implemented in the optimisation procedure. The removal efficiency of DOX equalling 79 ± 4.5% and the resultant degradation products were identified by High-Performance Liquid Chromatography–Diode Array Detection, Liquid Chromatography Quadruple Time of Flight Mass Spectrometry, Ultraperformance Liquid Chromatography–Tandem Mass Spectrometry, total organic carbon, total nitrogen, Attenuated Total Reflectance Furrier Transform–Infrared, and UV/Vis-based methods. The pm-rf-APGD-treated DOX solution due to the generated Reactive Oxygen and Nitrogen Species either lost its antimicrobial properties towards Escherichia coli ATCC25922 or significantly decreased biocidal activities by 37% and 29% in relation to Staphylococcus haemolyticus ATCC29970 and Staphylococcus aureus ATCC25904, respectively. Future implementation of this efficient and eco-friendly antibiotic-degradation technology into wastewater purification systems is predicted.

Specialized chemicals are used for intensifying food production, including boosting meat and crop yields. Among the applied formulations, antibiotics and pesticides pose a severe threat to the natural balance of the ecosystem, as they either contribute to the development of multidrug resistance among pathogens or exhibit ecotoxic and mutagenic actions of a persistent character. Recently, cold atmospheric pressure plasmas (CAPPs) have emerged as promising technologies for degradation of these organic pollutants. CAPP-based technologies show eco-friendliness and potency for the removal of organic pollutants of diverse chemical formulas and different modes of action. For this reason, various types of CAPP-based systems are presented in this review and assessed in terms of their constructions, types of discharges, operating parameters, and efficiencies in the degradation of antibiotics and persistent organic pollutants. Additionally, the key role of reactive oxygen and nitrogen species (RONS) is highlighted. Moreover, optimization of the CAPP operating parameters seems crucial to effectively remove contaminants. Finally, the CAPP-related paths and technologies are further considered in terms of biological and environmental effects associated with the treatments, including changes in antibacterial properties and toxicity of the exposed solutions, as well as the potential of the CAPP-based strategies for limiting the spread of multidrug resistance.

Rhenium nanoparticles are an attractive alternative to noble metal-based approaches, which show a limited applicability. The catalytic potential and environmental impact of rhenium nanoparticles (ReNPs) were assessed in conjunction with those of platinum nanoparticles (PtNPs). Both of these nanomaterials were synthesized via low-cost pulse-modulated radiofrequency atmospheric pressure glow discharge (pm-rf-APGD). In this context, pm-rf-APGD was used for the first time to synthesize Re-based nanomaterials. The obtained nanoparticles were used as nanocatalysts for hydrogenation of nitroaromatic compounds. Subsequent characterization revealed high efficacy of rhenium nanoparticles in catalysing the reduction of nitroaromatic compounds, which reached up to 100% conversion yields at a rate constant k 1 of 5.5 × 10 − 2 min − 1 . Although the k 1 values obtained for rhenium nanoparticles were lower than those recorded for platinum nanoparticles, this research highlights the economic aspects and explores the possible optimization of catalytic systems. Some putatively disadvantageous environmental impact of rhenium nanoparticles and platinum nanoparticles was demonstrated by the exposure of Raphanus sativus var. oleiferus L. seeds to either rhenium nanoparticles or platinum nanoparticles that resulted in development of the shorter sprouts. Despite this negative environmental impact, the outcomes of this study highlight the potential of rhenium nanoparticles for chemical transformation and emphasize the importance of further insights into the economic and environmental aspects of their application and mitigation strategies.

To the present day, no efficient plant protection method against economically important bacterial phytopathogens from the Pectobacteriaceae family has been implemented into agricultural practice. In this view, we have performed a multivariate optimization of the operating parameters of the reaction-discharge system, employing direct current atmospheric pressure glow discharge, generated in contact with a flowing liquid cathode (FLC-dc-APGD), for the production of a plasma-activated liquid (PAL) of defined physicochemical and anti-phytopathogenic properties. As a result, the effect of the operating parameters on the conductivity of PAL acquired under these conditions was assessed. The revealed optimal operating conditions, under which the PAL of the highest conductivity was obtained, were as follows: flow rate of the solution equaled 2.0 mL min−1, the discharge current was 30 mA, and the inorganic salt concentration (ammonium nitrate, NH4NO3) in the solution turned out to be 0.50% (m/w). The developed PAL exhibited bacteriostatic and bactericidal properties toward Dickeya solani IFB0099 and Pectobacterium atrosepticum IFB5103 strains, with minimal inhibitory and minimal bactericidal concentrations equaling 25%. After 24 h exposure to 25% PAL, 100% (1−2 × 106) of D. solani and P. atrosepticum cells lost viability. We attributed the antibacterial properties of PAL to the presence of deeply penetrating, reactive oxygen and nitrogen species (RONS), which were, in this case, OH, O, O3, H2O2, HO2, NH, N2, N2+, NO2−, NO3−, and NH4+. Putatively, the generated low-cost, eco-friendly, easy-to-store, and transport PAL, exhibiting the required antibacterial and physicochemical properties, may find numerous applications in the plant protection sector.

In view of a constant growth in the human population on Earth, the provision of a necessary amount of high-quality food looks challenging. As over 10% of the crop yields are annually lost due to the presence of phytopathogens, the development of novel, eco-friendly methods of pest eradication might contribute to avoiding nutritional shortages. Here, we propose a controlled application of cold atmospheric pressure plasma (CAPP) generated in the form of an atmospheric pressure plasma jet (APPJ), for which we conducted multivariate optimization of the working parameters with the use of the design of experiments (DoE) in addition to the response surface methodology (RSM). After estimating the optimal operating conditions of APPJ, we determined the inactivation rates caused by 2 min CAPP exposure towards bacterial phytopathogens from three species Dickeya solani, Pectobacterium atrosepticum and Pectobacterium carotovorum artificially inoculated on the surface of plant seeds from four species. Logarithmic reductions, as a key result of this work, were enclosed in the range of 1.61–4.95 in the case of Cucumis sativus, Pisum sativum, and Vigna radiata, while for the bacteria-inoculated Zea mays seeds, lower antibacterial properties of APPJ equaling 0.86–1.12 logs were noted. The herein applied exposure to APPJ did not reveal any statistically significant detrimental effects on the germination of plant seeds, seed coat integrity, or early plant growth. Even plant growth promotion by 20.96% was observed for the APPJ-exposed Zea mays seeds. By applying colorimetric assays and optical emission spectrometry (OES), we determined the oxidative potential in addition to identifying the reactive oxygen species (ROS) •OH, •HO2, •O2−, O3, and 1O2 and the reactive nitrogen species (RNS) N, NO2, and NO3 responsible for the antibacterial properties of APPJ. In summary, universal antiphytopathogenic properties of the APPJ treatment reached due to proper optimization of the working conditions were revealed against three bacterial strains from the family Pectobacteriaceae inoculated on the seeds from diverse plant species. The data presented herein may contribute to future development of the plasma agriculture field and provide alternatives to pesticides or the prevention-based control methods towards plant pathogenic bacteria.

Development of efficient plant protection methods against bacterial phytopathogens subjected to compulsory control procedures under international legislation is of the highest concern having in mind expensiveness of enforced quarantine measures and threat of the infection spread in disease-free regions. In this study, fructose-stabilized silver nanoparticles (FRU-AgNPs) were produced using direct current atmospheric pressure glow discharge (dc-APGD) generated between the surface of a flowing liquid anode (FLA) solution and a pin-type tungsten cathode in a continuous flow reaction-discharge system. Resultant spherical and stable in time FRU-AgNPs exhibited average sizes of 14.9 ± 7.9 nm and 15.7 ± 2.0 nm, as assessed by transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. Energy dispersive X-ray spectroscopy (EDX) analysis revealed that the obtained nanomaterial was composed of Ag while selected area electron diffraction (SAED) indicated that FRU-AgNPs had the face-centered cubic crystalline structure. The fabricated FRU-AgNPs show antibacterial properties against Erwinia amylovora, Clavibacter michiganensis, Ralstonia solanacearum, Xanthomonas campestris pv. campestris and Dickeya solani strains with minimal inhibitory concentrations (MICs) of 1.64 to 13.1 mg L−1 and minimal bactericidal concentrations (MBCs) from 3.29 to 26.3 mg L−1. Application of FRU-AgNPs might increase the repertoire of available control procedures against most devastating phytopathogens and as a result successfully limit their agricultural impact.

Poly(vinylpyrrolidone)-stabilized Pt nanoparticles (PVP-PtNPs) were produced in a continuous-flow reaction-discharge system by application of direct current atmospheric pressure glow discharge (dc-APGD) operated between the surface of a flowing liquid anode (FLA) and a pin-type tungsten cathode. Synthesized PVP-PtNPs exhibited absorption across the entire UV/Vis region. The morphology and elemental composition of PVP-PtNPs were determined with transmission electron microscopy (TEM) and energy dispersive X-ray scattering (EDX), respectively. As assessed by TEM, PVP-PtNPs were approximately spherical in shape, with an average size of 2.9 ± 0.6 nm. EDX proved the presence of Pt, C, and O. Dynamic light scattering (DLS) and attenuated total reflectance Fourier transform-infrared spectroscopy (ATR FT-IR) confirmed PtNPs functionalization with PVP. As determined by DLS, the average size of PtNPs stabilized by PVP was 111.4 ± 22.6 nm. A fluid containing resultant PVP-PtNPs was used as a heat conductive layer for a spiral radiator managing heat generated by a simulated internal combustion chamber. As compared to water, the use of PVP-PtNPs enhanced efficiency of the system, increasing the rate of heat transfer by 80% and 30% during heating and cooling, respectively.

Plant pathogenic bacteria cause significant economic losses in the global food production sector. To secure an adequate amount of high-quality nutrition for the growing human population, novel approaches need to be undertaken to combat plant disease-causing agents. As the currently available methods to eliminate bacterial phytopathogens are scarce, we evaluated the effectiveness and mechanism of action of a non-thermal atmospheric pressure plasma (NTAPP). It was ignited from a dielectric barrier discharge (DBD) operation in a plasma pencil, and applied for the first time for eradication of Dickeya and Pectobacterium spp., inoculated either on glass spheres or mung bean seeds. Furthermore, the impact of the DBD exposure on mung bean seeds germination and seedlings growth was estimated. The observed bacterial inactivation rates exceeded 3.07 logs. The two-minute DBD exposure stimulated by 3–4% the germination rate of mung bean seeds and by 13.4% subsequent early growth of the seedlings. On the contrary, a detrimental action of the four-minute DBD subjection on seed germination and early growth of the sprouts was noted shortly after the treatment. However, this effect was no longer observed or reduced to 9.7% after the 96 h incubation period. Due to the application of optical emission spectrometry (OES), transmission electron microscopy (TEM), and confocal laser scanning microscopy (CLSM), we found that the generated reactive oxygen and nitrogen species (RONS), i.e., N2, N2+, NO, OH, NH, and O, probably led to the denaturation and aggregation of DNA, proteins, and ribosomes. Furthermore, the cellular membrane disrupted, leading to an outflow of the cytoplasm from the DBD-exposed cells. This study suggests the potential applicability of NTAPPs as eco-friendly and innovative plant protection methods.