Explore the vast range of titles available.

A concept to prepare a highly hydrophobic composite with self-healing properties has been designed and verified. The new material is based on a composite of a crystalline hydrophobic fluoro wax, synthesized from montan waxes and perfluoroethylene alcohols, combined with spherical silica nanoparticles equipped with a hydrophobic shell. Highly repellent layers were prepared using this combination of a hydrophobic crystalline wax and silica nanoparticles. The novel aspect of our concept was to prepare a ladder-like structure of the hydrophobic shell allowing the inclusion of a certain share of wax molecules. Wax molecules trapped in the hydrophobic structure during mixing are hindered from crystallizing; therefore, these molecules maintain a higher mobility compared to crystallized molecules. When a thin layer of the composite material is mechanically damaged, the mobile wax molecules can migrate and heal the defects to a certain extent. The general preparation of the composite is described and XRD analysis demonstrated that a certain share of wax molecules in the composite are hindered to crystallize. Furthermore, we show that the resulting material can recovery its repellent properties after surface damage.

Polyester fibers are widely employed in a multitude of sectors and applications from the technical textiles to everyday life thanks to their durability, strength, and flexibility. Despite these advantages, polyester lacks in dyeability, adhesion of coating, hydrophilicity, and it is characterized by a low wettability respect to natural fibers. On this regard, beyond the harmful hydrophobic textile finishings of polyester fabrics containing fluorine-compounds, and in order to avoid pre-treatments, such as laser irradiation to improve their surface properties, research is moving towards the development of fluorine-free and safer coatings. In this work, the (3-glycidyloxypropyl)trimethoxysilane (GPTMS) and various long alkyl-chain alkoxysilanes were employed for the fabrication in the presence of a catalyst of a water-based superhydrophobic finishing for polyester fabrics with a simple sol-gel, non-fluorinated, sustainable approach and the dip-pad-dry-cure method. The finished polyester fabrics surface properties were investigated by static and dynamic water repellency tests. Additionally, the resistance to common water-based liquids, abrasion resistance, moisture adsorption, and air permeability measurements were performed. Scanning electron microscopy was employed to examine the micro- and nano-morphology of the functionalized polyester fabrics surfaces. The obtained superhydrophobic finishings displayed high water-based stain resistance as well as good hydrophobicity after different cycles of abrasion.

The textile-finishing industry, is one of the main sources of persistent organic pollutants in water; in this regard, it is necessary to develop and employ new sustainable approaches for fabric finishing and treatment. This research study shows the development of an efficient and eco-friendly procedure to form highly hydrophobic surfaces on cotton fabrics using different modified silica sols. In particular, the formation of highly hydrophobic surfaces on cotton fabrics was studied by using a two-step treatment procedure, i.e., first applying a hybrid silica sol obtained by hydrolysis and subsequent condensation of (3-Glycidyloxypropyl)trimethoxy silane with different alkyl(trialkoxy)silane under acid conditions, and then applying hydrolyzed hexadecyltrimethoxysilane on the treated fabrics to further improve the fabrics’ hydrophobicity. The treated cotton fabrics showed excellent water repellency with a water contact angle above 150° under optimum treatment conditions. The cooperative action of rough surface structure due to the silica sol nanoparticles and the low surface energy caused by long-chain alkyl(trialkoxy)silane in the nanocomposite coating, combined with the expected roughness on microscale due to the fabrics and fiber structure, provided the treated cotton fabrics with excellent, almost super, hydrophobicity and water-based stain resistance in an eco-sustainable way.

Thin, flat textile roofing offers negligible heat insulation. In warm areas, such roofing membranes are therefore equipped with metallized surfaces to reflect solar heat radiation, thus reducing the warming inside a textile building. Heat reflection effects achieved by metallic coatings are always accompanied by shading effects as the metals are non-transparent for visible light (VIS). Transparent conductive oxides (TCOs) are transparent for VIS and are able to reflect heat radiation in the infrared. TCOs are, e.g., widely used in the display industry. To achieve the perfect coatings needed for electronic devices, these are commonly applied using costly vacuum processes at high temperatures. Vacuum processes, on account of the high costs involved and high processing temperatures, are obstructive for an application involving textiles. Accepting that heat-reflecting textile membranes demand less perfect coatings, a wet chemical approach has been followed here when producing transparent heat-reflecting coatings. Commercially available TCOs were employed as colloidal dispersions or nanopowders to prepare sol–gel-based coating systems. Such coatings were applied to textile membranes as used for architectural textiles using simple coating techniques and at moderate curing temperatures not exceeding 130 °C. The coatings achieved about 90% transmission in the VIS spectrum and reduced near-infrared transmission (at about 2.5 µm) to nearly zero while reflecting up to 25% of that radiation. Up to 35% reflection has been realized in the far infrared, and emissivity values down to ε = 0.5777 have been measured.

In the present study, DOPO-based alkoxysilane (DOPO-ETES) and amido alkoxysilane (DOPO-AmdPTES) were synthesized by one-step and without by-products as halogen-free flame retardants. The flame retardants were applied on cotton fabric utilizing sol–gel method and pad-dry-cure finishing process. The flame retardancy, the thermal stability and the combustion ehaviour of treated cotton were evaluated by surface and bottom edge ignition flame test (according to EN ISO 15025), thermogravimetric analysis (TGA) and micro-scale combustion calorimeter (MCC). Unlike CO/DOPO-ETES sample, cotton treated with DOPO-AmdPTES nanosols exhibits self-extinguishing ehaviour with high char residue, an improvement of the LOI value and a significant reduction of the PHRR, HRC and THR compared to pristine cotton. Cotton finished with DOPO-AmdPTES reveals a semi-durability after ten laundering cycles keeping the flame-retardant properties unchanged. According to the results obtained from TGA-FTIR, Py-GC/MS and XPS, the major activity of flame retardant occurs in the condensed phase via catalytic induced char formation as physical barrier along with the activity in the gas phase derived mainly from the dilution effect. The early degradation of CO/DOPO-AmdPTES compared to CO/DOPO-ETES, triggered by the cleavage of the weak bond between P and C=O, as the DFT study indicated, provides the beneficial effect of this flame retardant on the fire resistance of cellulose.

This paper reports on an antimicrobial finishing for polyamide with high washfastness. As antimicrobial agent modified silica sols containing silver components are used as coating agent and are applied to the polyamide fabric by using a semi-industrial procedure. The antimicrobial properties of coated polyamide fabrics are determined against the bacteria E. coli . Significant antimicrobial effects are observed even after 40 washing cycles. The amount of silver on the polyamide fabrics was measured by using ICP-OES. Besides this, samples are investigated by means of UV/Vis-spectroscopy and scanning electron microscopy. Furthermore textile properties as, e.g., air permeability and mechanical properties were measured. Due to high antimicrobial effect and the strong washfastness of this finishing, this reported method could be of high interest for industrial production processes.

Three established test methods employed for evaluating the abrasion or wear resistance of textile materials were compared to gain deeper insight into the specific damaging mechanisms to better understand a possible comparability of the results of the different tests. The knowledge of these mechanisms is necessary for a systematic development of finishing agents improving the wear resistance of textiles. Martindale, Schopper, and Einlehner tests were used to analyze two different fabrics made of natural (cotton) or synthetic (polyethylene terephthalate) fibers, respectively. Samples were investigated by digital microscopy and scanning electron microscopy to visualize the damage. Damage symptoms are compared and discussed with respect to differences in the damaging mechanisms.

The antibacterial activity of ZnO is reported by several authors. We present the preparation and application of inorganic–organic hybrid polymers modified/filled with ZnO nanoparticles of varying particle sizes. Inorganic–organic hybrid polymers employed here are based on 3-glycidyloxypropyltrimethoxysilane (GPTMS). ZnO is prepared by hydrolysis of zinc acetate in different solvents (methanol, ethanol or 2-propanol) using lithium hydroxide (LiOH ċ H2O). The hybrid materials prepared are applied to cotton (100%) and cotton/polyester (65/35%) fabrics. The antibacterial performance of these sol-gel derived hybrid materials is exemplarily investigated against Gram-negative bacterium Escherichia coli and Gram–positive Micrococcus luteus. Effects of particle size and concentration for the antibacterial performance are examined. Literature discusses various (active) species and processes responsible for the antibacterial action of ZnO. Therefore, particular attention is paid to investigate active species available in the described systems as well as to observe possible interaction between the nanoparticles and bacteria; the first results are presented.

The antibacterial performance of sol-gel-derived inorganic-organic hybrid polymers filled with ZnO nanoparticles-chitosan against a gram-negative bacterium Escherichia coli and a gram-positive Micrococcus luteus has been investigated. Three different molecular weights (MW) of chitosan (CTS) 1.36 · 105, 2.2 · 105, and 3.0 · 105 Da with equal degree of deacetylation (DD, 85%) (coded as S 85-60, He 85-250, and He 85-500) with equal degree of deacetylation (DD, 85%) were examined. ZnO was prepared by the base hydrolysis of zinc acetate in isopropanol using lithium hydroxide (LiOH · H2O) to hydrolyze the precursor. Sol-gel-based inorganic-organic hybrid polymers were modified with these oxides and were applied to cellulosic cotton (100%) and cotton/polyester (65/35%) fabrics. Inorganic-organic hybrids polymers were based on 3-glycidyloxypropyltrimethoxysilane (GPTMS). Bacteriological tests were performed in nutrient agar media on solid agar plates and in liquid broth systems using ZnO nanoparticles with average particle size of (40 nm). Our study showed the enhanced antibacterial activity of ZnO nanoparticles chitosan (different MW) of against a gram-negative bacterium Escherichia coli DSMZ 498 and a gram-positive Micrococcus luteus ATCC 9341 in repeated experiments. The antibacterial activity of textile treated with ZnO nanoparticles chitosan increases with decreasing the molecular weight of chitosan.

Background Timely antimicrobial treatment and source control are strongly recommended by sepsis guidelines, however, their impact on clinical outcomes is uncertain. Methods We performed a planned secondary analysis of a cluster-randomized trial conducted from July 2011 to May 2015 including forty German hospitals. All adult patients with sepsis treated in the participating ICUs were included. Primary exposures were timing of antimicrobial therapy and delay of surgical source control during the first 48 h after sepsis onset. Primary endpoint was 28-day mortality. Mixed models were used to investigate the effects of timing while adjusting for confounders. The linearity of the effect was investigated by fractional polynomials and by categorizing of timing. Results Analyses were based on 4792 patients receiving antimicrobial treatment and 1595 patients undergoing surgical source control. Fractional polynomial analysis identified a linear effect of timing of antimicrobials on 28-day mortality, which increased by 0.42% per hour delay (OR with 95% CI 1.019 [1.01, 1.028], p  ≤ 0.001). This effect was significant in patients with and without shock (OR = 1.018 [1.008, 1.029] and 1.026 [1.01, 1.043], respectively). Using a categorized timing variable, there were no significant differences comparing treatment within 1 h versus 1–3 h, or 1 h versus 3–6 h. Delays of more than 6 h significantly increased mortality (OR = 1.41 [1.17, 1.69]). Delay in antimicrobials also increased risk of progression from severe sepsis to septic shock (OR per hour: 1.051 [1.022, 1.081], p  ≤ 0.001). Time to surgical source control was significantly associated with decreased odds of successful source control (OR = 0.982 [0.971, 0.994], p  = 0.003) and increased odds of death (OR = 1.011 [1.001, 1.021]; p  = 0.03) in unadjusted analysis, but not when adjusted for confounders (OR = 0.991 [0.978, 1.005] and OR = 1.008 [0.997, 1.02], respectively). Only, among patients with septic shock delay of source control was significantly related to risk-of death (adjusted OR = 1.013 [1.001, 1.026], p  = 0.04). Conclusions Our findings suggest that management of sepsis is time critical both for antimicrobial therapy and source control. Also patients, who are not yet in septic shock, profit from early anti-infective treatment since it can prevent further deterioration. Trial registration ClinicalTrials.gov ( NCT01187134 ). Registered 23 August 2010, NCT01187134