Explore the vast range of titles available.

Two dimensional layered organic-inorganic hybrid perovskites (2D perovskites) are potential candidates for next generation photovoltaic device. Especially, the out-of-plane surface perpendicular to the superlattice plane of 2D perovskites (layer-edge surface) has presented several exotic behaviors, such as layer-edge states which are found to be crucial for improving the efficiency of 2D perovskite solar cells. However, fundamental research on transport properties of layer-edge surface is still absent. In this report, we observe the electronic and opto-electronic behavior in layer-edge device of 2D perovskites. The dark and photo currents are demonstrated to strongly depend on the crystallographic orientation in layer-edge device, and such anisotropic properties, together with photo response, are related to the thickness of inorganic layers. Finally, due to the abundant hydroxyl groups, water molecules are easy to condense on the layer-edge surface, and the conductance is extremely sensitive to the humidity environment, indicating a potential application of humidity sensor. The edge of the thin sheets of two dimensional organic-inorganic hybrid perovskite crystals shows exotic physical properties that remain unexplored. Here Cheng et al. make electronic devices and study their transport properties, photoresponses and humid sensitivities which show large anisotropy.

In the last half-century, the development of biodegradable polymeric materials for biomedical applications has advanced significantly. Biodegradable polymeric materials are favored in the development of therapeutic devices, including temporary implants and three-dimensional scaffolds for tissue engineering. Further advancements have occurred in the utilization of biodegradable polymeric materials for pharmacological applications such as delivery vehicles for controlled/sustained drug release. These applications require particular physicochemical, biological, and degradation properties of the materials to deliver effective therapy. As a result, a wide range of natural or synthetic polymers able to undergo hydrolytic or enzymatic degradation is being studied for biomedical applications. This review outlines the current development of biodegradable natural and synthetic polymeric materials for various biomedical applications, including tissue engineering, temporary implants, wound healing, and drug delivery.

InN superconductivity is very special among III–V semiconductors, as other III–V semiconductors (such as GaAs, GaN, InP, InAs, etc.) usually lack strong covalent bonding and thus seldom show superconductivity at low temperatures. Here, we probe the different superconducting phase transitions in InN highlighted by its microstructure. Those chemical-unstable phase-separated inclusions, such as metallic indium or In 2 O 3 , are intentionally removed by HCl acid etching. The quasi-two-dimensional vortex liquid-glass transition is observed in the sample with a large InN grain size. In contrast, the superconducting properties of InN with a small grain size are sensitive to acid etching, showing a transition into a nonzero resistance state when the temperature approaches zero. Since the value of ξ 0 (the zero-temperature-limit superconducting coherence length) is close to the grain size, it is suggested that individual InN grains and intergrain coupling should be responsible for the sample-dependent InN superconducting phase transition. Our work establishes a guideline for engineering superconductivity in III-nitride.

Bone morphogenetic protein-2 (BMP-2) is currently the only Food and Drug Administration (FDA)-approved osteoinductive growth factor used as a bone graft substitute. However, with increasing clinical use of BMP-2, a growing and well-documented side effect profile has emerged. This includes postoperative inflammation and associated adverse effects, ectopic bone formation, osteoclast-mediated bone resorption, and inappropriate adipogenesis. Several large-scale studies have confirmed the relative frequency of adverse events associated with the clinical use of BMP-2, including life-threatening cervical spine swelling. In fact, the FDA has issued a warning of the potential life-threatening complications of BMP-2. This review summarizes the known adverse effects of BMP-2, including controversial areas such as tumorigenesis. Next, select animal models that replicate BMP-2's adverse clinical effects are discussed. Finally, potential molecules to mitigate the adverse effects of BMP-2 are reviewed. In summary, BMP-2 is a potent osteoinductive cytokine that has indeed revolutionized the bone graft substitute market; however, it simultaneously has accrued a worrisome side effect profile. Better understanding of these adverse effects among both translational scientists and clinicians will help determine the most appropriate and safe use of BMP-2 in the clinical setting.

Extracts of plants from the Malaysian rainforest and other fragile habitats are being researched intensively for identification of beneficial biological actions, with assessment of antioxidant behavior being a common component of such assessments. A number of tests for antioxidant behavior are used, with the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric reduction activity potential (FRAP) assays often being used in parallel, and also with measurement of total phenolics content (TPC) as a surrogate marker for antioxidant capacity. The present study investigated the possible redundancy in using all three assays to determine antioxidant capacity in 92 extracts obtained from 27 plants from the Malaysian rainforest. The results demonstrated that the assays displayed a high (R ≥ 0.82) and significant (P < 0.0001) correlation with one another, indicating a high level of redundancy if all three assays are used in parallel. This appears to be a waste of potentially valuable plant extracts. Because of problems with the FRAP assay relating to color interference and variable rates of reaction point, the DPPH assay is the preferred assay in preliminary screening of extracts of plants from the Malaysian rainforest.

Plastics are synthetic polymers known for their outstanding durability and versatility, and have replaced traditional materials in many applications. Unfortunately, their unique traits ensure that they pose a major threat to the environment. While literature on freshwater microplastic contamination has grown over the recent years, research undertaken in rapidly developing countries, where plastic production and use are increasing dramatically, has lagged behind that in other parts of the world. In the South East Asia (SEA) region, basic information on levels of contamination is very limited and, as a consequence, the risk to human and ecological health remains hard to assess. This review synthesises what is currently known about microplastic contamination of freshwater ecosystems in SEA, with a particular focus on Malaysia. The review 1) summarises published studies that have assessed levels of contamination in freshwater systems in SEA, 2) discusses key sources and transport pathways of microplastic in freshwaters, 3) outlines what is known of the impacts of microplastic on freshwater organisms, and 4) identifies key knowledge gaps related to our understanding of the transport, fate and effects of microplastic.

The invited review covers different research areas of silver nanoparticles (AgNPs), including the synthesis strategies of AgNPs, antimicrobial and anti-inflammatory properties of AgNPs, osteoconductive and osteoinductive activities of AgNP-based materials, and potential toxicity of AgNPs. The potential mechanisms of AgNP’s biological efficacy as well as its potential toxicity are discussed as well. In addition, the current development of AgNP applications, especially in the area of therapeutics, is also summarized.

Integration of electronic elements into textiles, to afford e-textiles, can provide an ideal platform for the development of lightweight, thin, flexible and stretchable e-textiles. This approach will enable us to meet the demands of the rapidly growing market of wearable-electronics on arbitrary non-conventional substrates. However the actual integration of the e-textiles that undergo mechanical deformations during both assembly and daily wear or satisfy the requirements of the low-end applications, remains a challenge. Resistive memory elements can also be fabricated onto a nylon thread (NT) for e-textile applications. In this study, a simple dip-and-dry process using graphene-PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrene sulfonate) ink is proposed for the fabrication of a highly stretchable non-volatile NT memory. The NT memory appears to have typical write-once-read-many-times characteristics. The results show that an ON/OFF ratio of approximately 10 3 is maintained for a retention time of 10 6  s. Furthermore, a highly stretchable strain and a long-term digital-storage capability of the ON-OFF-ON states are demonstrated in the NT memory. The actual integration of the knitted NT memories into textiles will enable new design possibilities for low-cost and large-area e-textile memory applications.

Two dimensional inorganic–organic hybrid perovskites (2D perovskites) suffer from not only quantum confinement, but also dielectric confinement, hindering their application perspective in devices involving the conversion of an optical input into current. In this report, we theoretically predict that an extremely low exciton binding energy can be achieved in 2D perovskites by using high dielectric-constant organic components. We demonstrate that in (HOCH 2 CH 2 NH 3 ) 2 PbI 4 , whose organic material has a high dielectric constant of 37, the dielectric confinement is largely reduced, and the exciton binding energy is 20-times smaller than that in conventional 2D perovskites. As a result, the photo-induced excitons can be thermally dissociated efficiently at room temperature, as clearly indicated from femtosecond transient absorption measurements. In addition, the mobility is largely improved due to the strong screening effect on charge impurities. Such low dielectric-confined 2D perovskites show excellent carrier extraction efficiency, and outstanding humidity resistance compared to conventional 2D perovskites. Two-dimensional inorganic–organic hybrid perovskites are expected to play an important role in photovoltaic devices but suffer from issues related to dielectric confinement. The authors theoretically outline a method and experimentally succeed to overcome this issue by using materials with large dielectric constants.

PurposeThis study aimed to optimize the dyeing scheduling process with uncertain job completion time to reduce resource consumption and wastewater generation, and while reconciling the conflicting objectives of minimizing the makespan and the need to limit the production on specific machines to minimize rework.Design/methodology/approachWe employed a UNISON framework that integrates fuzzy decision tree (FDT) to optimize dyeing machine scheduling by minimizing the makespan and water consumption, in which the critical attributes such as machine capacity and processing time can be incorporated into the scheduling model for smart production.FindingsAn empirical study of a high-tech textile company has shown the validity and effectiveness of the proposed approach in reducing the makespan and water consumption by over 8% while high product quality and efficiency being maintained.Originality/valueHigh-tech textile industry is facing the challenges in reducing the environmental impact of the dyeing process while maintaining product quality and efficiency for smart production. Conventional scheduling approaches have not addressed the relationship between machine groups and reworking, resulting in difficulty in controlling the makespan and water consumption and increasing costs and environmental issues. The proposed approach has addressed uncertain job completion via integrating FDT into the scheduling process to effectively reduce makespan and wastewater. The results have shown practical viability of the developed solution in real settings.