Explore the vast range of titles available.

Contamination of soil with heavy metals is a worldwide problem, which causes heavy metals to release into the environment. Remediation of such contaminated soil is essential to protect the environment. The aims of this study are: first, to compare the effect of biochar and the joint application of biochar with fertilizer for the phytoremediation of heavy metals-contaminated soil using Acacia auriculiformis; second, to study the effect of the application rate of biochar in improving the physicochemical properties of the soil. The soil samples were collected from an active coal mine dump and assessed for their physicochemical properties and heavy metals toxicity. Initial results indicated that the soil has poor physicochemical properties and was contaminated with the presence of heavy metals such as Zn, Ni, Cu, Cr, and Co. Later, the heavy metals-contaminated soil was mixed with the 400 and 600 °C biochar, as well as the respective biochar–fertilizer combination in varying mixing ratios from 0.5 to 5% (w/w) and subjected to a pot-culture study. The results showed that the application of both varieties of biochar in combination with fertilizer substantially improved the physicochemical properties and reduced the heavy metals toxicity in the soil. The biochar and fertilizer joint application also substantially improved the soil physiochemical properties by increasing the application rate of both varieties of biochar from 0.5 to 5%. The soil fertility index (SFI) of the biochar and biochar–fertilizer amended soil increased by 49.46 and 52.22%, respectively. The plant’s physiological analysis results indicated a substantial increase in the plant’s shoot and root biomass through the application of biochar and biochar–fertilizer compared to the control. On the other hand, it significantly reduced the heavy metals accumulation and, hence, the secretion of proline and glutathione hormones in the plant cells. Therefore, it can be concluded that the joint application of biochar with the application rate varying between 2.5 to 5% (w/w) with the fertilizer significantly improved the physicochemical properties of the soil and reduced the heavy metals toxicity compared to the controlled study.

In many developing countries with surging vehicular traffic and inadequate traffic management, excessive road traffic noise exposure poses substantial health concerns, linked to increased stress, insomnia and other metabolic disorders. This study aims to assess the linkage between sociodemographic factors, traffic noise levels in residential areas and health effects using a cross-sectional study analyzing respondents’ perceptions and reports. Noise levels were measured at 57 locations in Srinagar, India, using noise level meter. Sound PLAN software was employed to generate noise contour maps, enabling the visualization of noise monitoring locations and facilitating the assessment of noise levels along routes in proximity to residential areas. Correlation analysis showed a strong linear relationship between field-measured and modelled noise ( r 2  = 0.88). Further, a questionnaire-based survey was carried out near the sampling points to evaluate the association of ischemic heart disease with traffic noise. Residents exposed to noise levels (L den  > 60 dB(A)) were found to have a 2.24 times higher odds ratio. Compared to females, males reported a 16% higher prevalence of the disease. Multi-faceted policy strategies involving noise mapping initiatives, source noise standards, traffic flow urban mobility optimization, smart city initiatives and stringent litigatory measures could significantly reduce its detrimental impact on public health. Finally, this study envisions a region-specific strong regulatory framework for integrating noise pollution mitigation strategies into the public health action plans of developing nations.

Nutrient pollution has a diverse impact on the environment and human health. The presence of nutrients, such as ammonium and phosphate, is ubiquitous in the environment due to their extensive use in agricultural land and leaching through non-point sources. In this context, biochar-based composites could play an essential role in improving the soil’s nutrient retention capacity. The present study aims to develop bentonite-biochar composites (BNT@BC 400 and 600) and utilize them as an ameliorating material in the coal mine degraded soil to reduce the leaching of ammonium and phosphate ions. The bentonite-biochar composite (BNT@BC 400 and 600) was synthesized using the pristine rice straw-derived biochar using the solvothermal method. The biochar was produced at two different pyrolytic temperatures, 400 °C and 600 °C, and denoted as BC 400 and 600, respectively. Hence, the bentonite-biochar composite was denoted as BNT@BC 400 and 600. The BNT@BC 400 and 600 were characterized using the elemental, proximate, SEM, XRD, and FTIR analysis. Subsequently, the BNT@BC composites were evaluated for the adsorptive removal of NH4+ and PO43− ions using batch adsorption and column leaching studies. In the soil columns, the BNT@BC 400 and 600 were mixed with the soil at two different application rates, viz. 1 and 2.5% (w/w). The leaching characteristics data were fitted using three different fixed-bed models to predict the maximum adsorption capacity of the amended soil columns and the dominant mechanism of adsorption. Results indicated that the BNT@BC 600 showed the maximum adsorption capacity of 33.77 and 64.23 mg g−1 for the adsorption of NH4+ and PO43− ions, respectively. The dominant adsorption mechanisms in the aqueous solution were the electrostatic attraction, complexation, ion exchange, and precipitation processes. In the soil columns, the sorption of NH4+ and PO43− ions was governed by diffusive mass transfer and electrostatic interaction. Findings of the study indicated that incorporating the BNT@BC composite in the soil can significantly reduce the leaching of the NH4+ and PO43− ions and increase the overall soil fertility.

Disinfection by-products (DBPs) are a concern due to their presence in chlorinated wastewater, sewage treatment plant discharge, and surface water, and their potential for environmental toxicity. Despite some attention to their ecotoxicity, little is known about the phytotoxicity of DBPs. This study aimed to evaluate the individual and combined phytotoxicity of four trihalomethanes (THMs: trichloromethane (TCM), bromodichloromethane (BDCM), dibromochloromethane (DBCM), and tribromomethane (TBM) and their mixture (THM4)), and trichloroacetic acid (TCAA) using genotoxic and cytotoxic assays. The analysis included seed germination tests using Vigna radiata and root growth tests, mitosis studies, oxidative stress response, chromosomal aberrations (CA), and DNA laddering using Allium cepa . The results showed a progressive increase in root growth inhibition for both plant species as the concentration of DBPs increased. High concentrations of mixtures of four THMs resulted in significant ( p  < 0.05) antagonistic interactions. The effective concentration (EC 50 ) value for V. radiata was 5655, 3145, 2690, 1465, 3570, and 725 mg/L for TCM, BDCM, DBCM, TBM, THM4, and TCAA, respectively. For A. cepa , the EC 50 for the same contaminants was 700, 400, 350, 250, 450, and 105 mg/L, respectively. DBP cytotoxicity was observed through CAs, including C-metaphase, unseparated anaphase, lagging chromosome, sticky metaphase, and bridging. Mitotic depression (MD) increased with dose, reaching up to 54.4% for TCAA (50–500 mg/L). The electrophoresis assay showed DNA fragmentation and shearing, suggesting genotoxicity for some DBPs. The order of phytotoxicity for the tested DBPs was TCAA > TBM > DBCM > BDCM > THM4 > TCM. These findings underscore the need for further research on the phytotoxicity of DBPs, especially given their common use in agricultural practices such as irrigation and the use of sludge as manure.

The pursuit of environmental sustainability and the harnessing of renewable energy sources pose significant challenges, compelling researchers to explore innovative solutions. Carbon materials have emerged as crucial players in both energy, environmental, and agricultural applications, owing to their exceptional properties. Biomass waste, abundant and often overlooked, has captured attention as a promising precursor for the development of carbon-based products. This is particularly evident in the creation of biochar and hydrochar, whose characteristics are intricately shaped by production methods, source materials, and process conditions. These variables collectively influence their suitability for diverse purposes, ranging from energy storage and conversion to soil and water restoration, making them invaluable tools in sustainable agriculture and environmental conservation, as well as in the capture of greenhouse gases. The versatility of biomass-based activated carbon is further enhanced by the diverse array of feedstocks and activation pathways employed. This adaptability renders it suitable for a multitude of applications, creating a symbiotic relationship between resource abundance and functional efficacy. This comprehensive review aims to evaluate contemporary thermochemical methods for converting organic waste into high-value carbon materials. Moreover, it delves into strategies that augment the functionality of these materials, including activation processes and surface modifications. The review also illuminates recent advancements in the realms of energy, agriculture, and environmental research. It consolidates existing literature on physicochemical characteristics and techno-economic assessments of engineered carbon materials, providing a nuanced understanding of their potential impact. While exploring challenges, prospects, and future research directions, this review outlines the synthesis of carbon compounds from biomass. It emphasises the capacity to produce distinct chars with unique properties through various production methods, tailoring them to the specific requirements of diverse environmental applications.