Explore the vast range of titles available.

Bacterial infections are one of the leading causes of death worldwide. In the case of topical bacterial infections such as wound infections, silver (Ag) has historically been one of the most widely used antibacterials. However, scientific publications have demonstrated the adverse effects of silver on human cells, ecotoxicity and insufficient antibacterial effect for the complete elimination of bacterial infections. The use of Ag in the form of nanoparticles (NPs, 1–100 nm) allows to control the release of antibacterial Ag ions but is still not sufficient to eliminate infection and avoid cytotoxicity. In this study, we tested the potency of differently functionalized copper oxide (CuO) NPs to enhance the antibacterial properties of Ag NPs. The antibacterial effect of the mixture of CuO NPs (CuO, CuO–NH 2 and CuO–COOH NPs) with Ag NPs (uncoated and coated) was studied. CuO and Ag NP combinations were more efficient than Cu or Ag (NPs) alone against a wide range of bacteria, including antibiotic-resistant strains such as gram-negative Escherichia coli and Pseudomonas aeruginosa as well as gram-positive Staphylococcus aureus , Enterococcus faecalis and Streptococcus dysgalactiae . We showed that positively charged CuO NPs enhanced the antibacterial effect of Ag NPs up to 6 times. Notably, compared to the synergy of CuO and Ag NPs, the synergy of respective metal ions was low, suggesting that NP surface is required for the enhanced antibacterial effect. We also studied the mechanisms of synergy and showed that the production of Cu + ions, faster dissolution of Ag + from Ag NPs and lower binding of Ag + by proteins of the incubation media in the presence of Cu 2+ were the main mechanisms of the synergy. In summary, CuO and Ag NP combinations allowed increasing the antibacterial effect up to 6 times. Thus, using CuO and Ag NP combinations enables to retain excellent antibacterial effects due to Ag and synergy and enhances beneficial effects, since Cu is a vital microelement for human cells. Thus, we suggest using combinations of Ag and CuO NPs in antibacterial materials, such as wound care products, to increase the antibacterial effect of Ag, improve safety and prevent and cure topical bacterial infections.

ObjectiveWe describe the clinical and genetic characteristics of fetuses and infants diagnosed with tuberous sclerosis complex (TSC) in our centre, prenatally or neonatally, for a better understanding of the benefits of early screening.MethodsIn this retrospective study, we analysed the data on one fetus and nine infants with a definitive TSC diagnosis by genetic criteria (five patients carrying TSC1 variants and 5 patients carrying TSC2 variants). We explored the differences between phenotypes of patients carrying TSC1 and TSC2 pathogenic variants.ResultsThe most common initial presenting features of TSC were cardiac rhabdomyomas (CRs) that were observed in nine out of ten patients. The most common postnatal features, besides CR, were presented with subependymal nodules—in five patients, and hypomelanotic macules—in four patients. In total, 10 variants causing TSC were detected in this study, including 5 novel variants. We demonstrated that patients with TSC2 variants had earlier onset and more severe clinical manifestations compared with patients carrying TSC1 variants.ConclusionEarly diagnosis of TSC improves genetic counselling and perinatal management.

Due to the high prevalence of infectious diseases and their concurrent outbreaks, there is a high interest in developing novel materials with antimicrobial properties. Antibacterial and antiviral properties of a range of metal-based nanoparticles (NPs) are a promising means to fight airborne diseases caused by viruses and bacteria. The aim of this study was to test antimicrobial metals and metal-based nanoparticles efficacy against three viruses, namely influenza A virus (H1N1; A/WSN/1933) and coronaviruses TGEV and SARS-CoV-2; and two bacteria, Escherichia coli and Staphylococcus aureus. The efficacy of ZnO, CuO, and Ag NPs and their respective metal salts, i.e., ZnSO4, CuSO4, and AgNO3, was evaluated in suspensions, and the compounds with the highest antiviral efficacy were chosen for incorporation into fibers of cellulose acetate (CA), using electrospinning to produce filter materials for face masks. Among the tested compounds, CuSO4 demonstrated the highest efficacy against influenza A virus and SARS-CoV-2 (1 h IC50 1.395 mg/L and 0.45 mg/L, respectively), followed by Zn salt and Ag salt. Therefore, Cu compounds were selected for incorporation into CA fibers to produce antiviral and antibacterial filter materials for face masks. CA fibers comprising CuSO4 decreased SARS-CoV-2 titer by 0.38 logarithms and influenza A virus titer by 1.08 logarithms after 5 min of contact; after 1 h of contact, SARS-COV-2 virus was completely inactivated. Developed CuO- and CuSO4-based filter materials also efficiently inactivated the bacteria Escherichia coli and Staphylococcus aureus. The metal NPs and respective metal salts were potent antibacterial and antiviral compounds that were successfully incorporated into the filter materials of face masks. New antibacterial and antiviral materials developed and characterized in this study are crucial in the context of the ongoing SARS-CoV-2 pandemic and beyond.

Clinical use of CuO nanoparticles (NPs) as antibacterials can be hampered by their toxicity to human cells. We hypothesized that certain surface functionalizations of CuO NPs may render NPs toxic to bacteria, but still be relatively harmless to human cells. To control this hypothesis, the toxicity of differently functionalized CuO NPs to bacteria Escherichia coli vs human cells (THP-1 macrophages and HACAT keratinocytes) was compared using similar conditions and end points. CuO NPs functionalized with polyethylene glycol (CuO–PEG), carboxyl (CuO–COOH, anionic), ammonium (CuO–NH4+, cationic) and unfunctionalized CuO NPs and CuSO4 (controls) were tested. In general, the toxicity of Cu compounds decreased in the following order: CuO–NH4+ > unfunctionalized CuO > CuSO4 > CuO–COOH > CuO–PEG. Positively charged unfunctionalized CuO and especially CuO–NH4+ proved most toxic (24-h EC50 = 21.7–47 mg/l) and had comparable toxicity to bacterial and mammalian cells. The multivariate analysis revealed that toxicity of these NPs was mostly attributed to their positive zeta potential, small hydrodynamic size, high Cu dissolution, and induction of reactive oxygen species (ROS) and TNF-α. In contrast, CuO–COOH and CuO–PEG NPs had lower toxicity to human cells compared to bacteria despite efficient uptake of these NPs by human cells. In addition, these NPs did not induce TNF-α and ROS. Thus, by varying the NP functionalization and Cu form (soluble salt vs NPs), it was possible to “target” the toxicity of Cu compounds, whereas carboxylation and PEGylation rendered CuO NPs that were more toxic to bacteria than to human cells envisaging their use in medical antibacterial products.

Background: Intellectual disability with developmental delay is the most common developmental disorder. However, this diagnosis is rarely associated with congenital cardiomyopathy. In the current report, we present the case of a patient suffering from dilated cardiomyopathy and developmental delay. Methods: Neurological pathology in a newborn was diagnosed immediately after birth, and the acquisition of psychomotor skills lagged behind by 3–4 months during the first year of life. WES analysis of the proband did not reveal a causal variant, so the search was extended to trio. Results: Trio sequencing revealed a de novo missense variant in the CAMK2D gene (p.Arg275His), that is, according to the OMIM database and available literature, not currently associated with any specific inborn disease. The expression of Ca2+/calmodulin-dependent protein kinase II delta (CaMKIIδ) protein is known to be increased in the heart tissues from patients with dilated cardiomyopathy. The functional effect of the CaMKIIδ Arg275His mutant was recently reported; however, no specific mechanism of its pathogenicity was proposed. A structural analysis and comparison of available three-dimensional structures of CaMKIIδ confirmed the probable pathogenicity of the observed missense variant. Conclusions: We suggest that the CaMKIIδ Arg275His variant is highly likely the cause of dilated cardiomyopathy and neurodevelopmental disorders.

The microstructure of In(As,Bi)/GaAs heterostructures grown by low-temperature molecular beam epitaxy with special attention to the interfaces was studied by scanning/transmission electron microscopy, energy dispersive X-ray microanalysis, and X-ray diffraction and reflectivity. Two samples grown at similar conditions with and without the presence of the Bi-contained layer, formed at 350 °C, are considered. These samples were jointly analyzed to clarify Bi influence on the crystal structure. Two types of QD-like clusters at the GaAs/In(As,Bi) interface were found. The first type exhibited a zinc blend crystal structure, which is typical for A3B5 semiconductors. The second type adopted a tetragonal PbO crystal structure and was found in different orientations. The joint analysis by electron microscopy and X-ray methods demonstrated that the incorporation of Bi atoms into the InAs layer leads to the strain relaxation at the interface in the growth direction. According to electron microscopy data, this strain release is more pronounced around the clusters of the second type.

Metal-silicon junctions are crucial to the operation of semiconductor devices: aggressive scaling demands low-resistive metallic terminals to replace high-doped silicon in transistors. It suggests an efficient charge injection through a low Schottky barrier between a metal and Si. Tremendous efforts invested into engineering metal-silicon junctions reveal the major role of chemical bonding at the interface: premier contacts entail epitaxial integration of metal silicides with Si. Here we present epitaxially grown EuSi 2 /Si junction characterized by RHEED, XRD, transmission electron microscopy, magnetization and transport measurements. Structural perfection leads to superb conductivity and a record-low Schottky barrier with n -Si while an antiferromagnetic phase invites spin-related applications. This development opens brand-new opportunities in electronics.

A new oxide, sodium iron antimonate, Na2FeSbO5, was synthesized and structurally characterized, and its static and dynamic magnetic properties were comprehensively studied both experimentally by dc and ac magnetic susceptibility, magnetization, specific heat, electron spin resonance (ESR) and Moessbauer measurements, and theoretically by density functional calculations. The resulting single-crystal structure (a = 15.6991(9) A; b = 5.3323 (4) A; c = 10.8875(6) A; S.G. Pbna) consists of edge-shared SbO6 octahedral chains, which alternate with vertex-linked, magnetically active FeO4 tetrahedral chains. The 57Fe Moessbauer spectra confirmed the presence of high-spin Fe3+ (3d5) ions in a distorted tetrahedral oxygen coordination. The magnetic susceptibility and specific heat data show the absence of a long-range magnetic ordering in Na2FeSbO5 down to 2 K, but ac magnetic susceptibility unambigously demonstrates spin-glass-type behavior with a unique two-step freezing at Tf1 about 80 K and Tf2 about 35 K. Magnetic hyperfine splitting of 57Fe Moessbauer spectra was observed below T* about 104 K (Tf1 < T*). The spectra just below T* (Tf1 < T < T*) exhibit a relaxation behavior caused by critical spin fluctuations, indicating the existence of short-range correlations. The stochastic model of ionic spin relaxation was used to account for the shape of the Moessbauer spectra below the freezing temperature. A complex slow dynamics is further supported by ESR data revealing two different absorption modes presumably related to ordered and disordered segments of spin chains. The data imply a spin-cluster ground state for Na2FeSbO5.

Antiferromagnetic PbMnTeO6, also known as mineral kuranakhite, has been reported recently to have all three cations in trigonal prismatic coordination, which is extremely unusual for both Mn(4+) and Te(6+). In this work, the phase was reproduced with the same lattice parameters and Néel temperature TN = 20 K. However, powder neutron diffraction unambiguously determined octahedral (trigonal antiprismatic) coordination for all cations within the chiral space group P312. The same symmetry was proposed for SrMnTeO6 and PbGeTeO6, instead of the reported space groups P-62m and P31m, respectively. PbMnTeO6 was found to be a robust antiferromagnet with an assumingly substantial scale of exchange interactions since the Neel temperature did not show any changes in external magnetic fields up to 7 T. The determined effective magnetic moment meff = 3.78 mB was in excellent agreement with the numerical estimation using the effective g-factor g = 1.95 directly measured here by electron spin resonance (ESR). Both specific heat and ESR data indicated the two-dimensional character of magnetism in the compound under study. The combination of chirality with magnetic order makes PbMnTeO6 a promising material with possible multiferroic properties.