Explore the vast range of titles available.

Ocular drug delivery has seen several advances in the past few decades, with respect to new drugs, improved formulations, targeted delivery, as well as exploration of new routes of drug administration. New materials have been explored for encasing existing drugs, which can enhance treatment by increasing bioavailability, decreasing toxicity, providing better tissue adherence, targeted delivery as well as increased duration of action. The challenges and requirements are different for the anterior and posterior ocular segments. This review summarizes the recent advances in sustained ocular therapy, both to the anterior and posterior segments, which have been made possible, thanks to nanotechnology. We also discuss the distribution and fate of these nanocarriers themselves, postadministration, as well as clearance from ocular tissues.

The 3D bioprinting of stem cells directly into scaffolds offers great potential for the development of regenerative therapies; in particular for the fabrication of organ and tissue substitutes. For this to be achieved; the lineage fate of bioprinted stem cell must be controllable. Bioprinting can be neutral; allowing culture conditions to trigger differentiation or alternatively; the technique can be designed to be stimulatory. Such factors as the particular bioprinting technique; bioink polymers; polymer cross-linking mechanism; bioink additives; and mechanical properties are considered. In addition; it is discussed that the stimulation of stem cell differentiation by bioprinting may lead to the remodeling and modification of the scaffold over time matching the concept of 4D bioprinting. The ability to tune bioprinting properties as an approach to fabricate stem cell bearing scaffolds and to also harness the benefits of the cells multipotency is of considerable relevance to the field of biomaterials and bioengineering.

Despite immense revolutionary therapeutics potential, sustaining release of active small interfering RNA (siRNA) remains an arduous challenge. The development of nanoparticles with siRNA sustained release capabilities provides an avenue to enhance the therapeutic efficacy of gene-based therapy. Herein, we present a new system based on the encapsulation of siRNA/chitosan-methacrylate (CMA) complexes into liposomes to form UV crosslinkable Nanolipogels (NLGs) with sustained siRNA-release properties in vitro. We demonstrated that the CMA nanogel in NLGs can enhance the encapsulation efficiency of siRNA and provide sustained release of siRNA up to 28 days. To understand the particle mechanism of cellular entry, multiple endocytic inhibitors have been used to investigate its endocytosis pathways. The study saw positively charged NLGs entering cells via multiple endocytosis pathways, facilitating endosomal escape and slowly releasing siRNA into the cytoplasm. Transfection experiments confirmed that the crosslinked NLG delivery system provides effective transfection and prolonged silencing effect up to 14 days in cell cultures. We expect that this sustained-release siRNA NLG platform would be of interest in both fundamental biological studies and in clinical applications to extend the use of siRNA-based therapies.

Topical medication remains the first line treatment of glaucoma; however, sustained ocular drug delivery via topical administration is difficult to achieve. Most drugs have poor penetration due to the multiple physiological barriers of the eye and are rapidly cleared if applied topically. Currently, daily topical administration for lowering the intra-ocular pressure (IOP), has many limitations, such as poor patient compliance and ocular allergy from repeated drug administration. Poor compliance leads to suboptimal control of IOP and disease progression with eventual blindness. The delivery of drugs in a sustained manner could provide the patient with a more attractive alternative by providing optimal therapeutic dosing, with minimal local toxicity and inconvenience. To investigate this, we incorporated latanoprost into LUVs (large unilamellar vesicles) derived from the liposome of DPPC (di-palmitoyl-phosphatidyl-choline) by the film hydration technique. Relatively high amounts of drug could be incorporated into this vesicle, and the drug resides predominantly in the bilayer. Vesicle stability monitored by size measurement and DSC (differential scanning calorimetry) analysis showed that formulations with a drug/lipid mole ratio of about 10% have good physical stability during storage and release. This formulation demonstrated sustained release of latanoprost in vitro, and then tested for efficacy in 23 rabbits. Subconjunctival injection and topical eye drop administration of the latanoprost/liposomal formulation were compared with conventional daily administration of latanoprost eye drops. The IOP lowering effect with a single subconjunctival injection was shown to be sustained for up to 50 days, and the extent of IOP lowering was comparable to daily eye drop administration. Toxicity and localized inflammation were not observed in any treatment groups. We believe that this is the first demonstration, in vivo, of sustained delivery to the anterior segment of the eye that is safe and efficacious for 50 days.

BackgroundTo develop targeted antifibrotic therapy for glaucoma filtration surgery; this study determines the effectiveness of small interfering RNA (siRNA) to reduce in vivo secreted protein acidic and rich in cysteine (SPARC) expression using the mouse model of conjunctival scarring.Methods Experimental surgery was performed as described for the mouse model of conjunctival scarring. Scrambled (siScram) or Sparc (siSparc) siRNAs, loaded on layer-by-layer (LbL) nanoparticles, were injected into the conjunctiva immediately after surgery. Expression of Sparc, Col1a1, Fn1 and Mmp14 was measured by real-time PCR and immunoblotting on days 7 and 14 postsurgery. Live imaging of the operated eyes was performed using slit lamp, anterior segment-optical coherence tomography and confocal microscopy. Tissue pathology was evaluated by histochemical and immunofluorescent analyses of operated conjunctival cryosections. Tissue apoptosis was quantitated by annexin V assay.Results siSparc, delivered via expanded LbL nanoparticles, significantly inhibited Sparc transcription in both day 7 (2.04-fold) and day 14 (1.39-fold) treated tissues. Sparc suppression on day 7 was associated with a significant reduction of Col1a1 (2.52-fold), Fn1 (2.89-fold) and Mmp14 (2.23-fold) mRNAs. At the protein level, both SPARC and collagen 1A1 (COL1A1) were significantly reduced at both time points with siSparc treatment. Nanoparticles were visualised within cell-like structures by confocal microscopy, while overt tissue response or apoptosis was not observed.Conclusions SPARC targeted therapy effectively reduced both SPARC and collagen production in the operated mouse conjunctiva. This proof-of-concept study suggests that targeted treatment of fibrosis in glaucoma surgery is safe and feasible, with the potential to extend to a range of potential genes associated with fibrosis.

Polymers are widely used in many applications in the field of biomedical engineering. Among eclectic selections of polymers, those with low melting temperature (Tm < 200 °C), such as poly(methyl methacrylate), poly(lactic-co-glycolic acid), or polyethylene, are often used in bone, dental, maxillofacial, and corneal tissue engineering as substrates or scaffolds. These polymers, however, are bioinert, have a lack of reactive surface functional groups, and have poor wettability, affecting their ability to promote cellular functions and biointegration with the surrounding tissue. Improving the biointegration can be achieved by depositing hydroxyapatite (HAp) on the polymeric substrates. Conventional thermal spray and vapor phase coating, including the Food and Drug Administration (FDA)-approved plasma spray technique, is not suitable for application on the low Tm polymers due to the high processing temperature, reaching more than 1000 °C. Two non-thermal HAp coating approaches have been described in the literature, namely, the biomimetic deposition and direct nanoparticle immobilization techniques. In the current review, we elaborate on the unique features of each technique, followed by discussing the advantages and disadvantages of each technique to help readers decide on which method is more suitable for their intended applications. Finally, the future perspectives of the non-thermal HAp coating are given in the conclusion.

Bacterial biofilm on medical devices is difficult to eradicate. Many have capitalized the anti-infective capability of silver ions (Ag+) by incorporating nano-silver (nAg) in a biodegradable coating, which is then laid on polymeric medical devices. However, such coating can be subjected to premature dissolution, particularly in harsh diseased tissue microenvironment, leading to rapid nAg clearance. It stands to reason that impregnating nAg directly onto the device, at the surface, is a more ideal solution. We tested this concept for a corneal prosthesis by immobilizing nAg and nano-hydroxyapatite (nHAp) on poly(methyl methacrylate), and tested its biocompatibility with human stromal cells and antimicrobial performance against biofilm-forming pathogens, Pseudomonas aeruginosa and Staphylococcus aureus. Three different dual-functionalized substrates—high Ag (referred to as 75:25 HAp:Ag); intermediate Ag (95:5 HAp:Ag); and low Ag (99:1 HAp:Ag) were studied. The 75:25 HAp:Ag was effective in inhibiting biofilm formation, but was cytotoxic. The 95:5 HAp:Ag showed the best selectivity among the three substrates; it prevented biofilm formation of both pathogens and had excellent biocompatibility. The coating was also effective in eliminating non-adherent bacteria in the culture media. However, a 28-day incubation in artificial tear fluid revealed a ~40% reduction in Ag+ release, compared to freshly-coated substrates. The reduction affected the inhibition of S. aureus growth, but not the P. aeruginosa. Our findings suggest that Ag+ released from surface-immobilized nAg diminishes over time and becomes less effective in suppressing biofilm formation of Gram-positive bacteria, such as S. aureus. This advocates the coating, more as a protection against perioperative and early postoperative infections, and less as a long-term preventive solution.

Lipid based nanoparticulate formulations have been widely used for the encapsulation and sustain release of hydrophilic drugs, but they still face challenges such as high initial burst release. Nanolipogel (NLG) emerges as a potential system to encapsulate and deliver hydrophilic drug while suppressing its initial burst release. However, there is a lack of characterization of the drug release mechanism from NLGs. In this work, we present a study on the release mechanism of hydrophilic Dextran-Fluorescein Isothiocyanate (DFITC) from Poly (ethylene glycol) Diacrylate (PEGDA) NLGs by using different molecular weights of PEGDA to vary the mesh size of the nanogel core, drawing inspiration from the macromolecular crowding effect in cells, which can be viewed as a mesh network of undefined sizes. The effect is then further characterized and validated by studying the diffusion of DFITC within the nanogel core using Fluorescence Recovery after Photobleaching (FRAP), on our newly developed cell derived microlipogels (MLG). This is in contrast to conventional FRAP works on cells or bulk hydrogels, which is limited in our application. Our work showed that the mesh size of the NLGs can be controlled by using different Mw of PEGDA, such as using a smaller MW to achieve higher crosslinking density, which will lead to having smaller mesh size for the crosslinked nanogel, and the release of hydrophilic DFITC can be sustained while suppressing the initial burst release, up to 10-fold more for crosslinked PEGDA 575 NLGs. This is further validated by FRAP which showed that the diffusion of DFITC is hindered by the decreasing mesh sizes in the NLGs, as a result of lower mobile fractions. These findings will be useful for guiding the design of PEGDA NLGs to have different degree of suppression of the initial burst release as well as the cumulative release, for a wide array of applications. This can also be extended to other different types of nanogel cores and other nanogel core-based nanoparticles for encapsulation and release of hydrophilic biomolecules.

Micropatterned biomaterial-based hydrogel platforms allow the recapitulation of in vivo -like microstructural and biochemical features that are critical physiological regulators of stem cell development. Herein, we report the use of muscle mimicking geometries patterned on polyacrylamide hydrogels as an effective strategy to induce smooth muscle cell (SMC) differentiation of human mesenchymal stem cells (hMSCs). hMSCs were systemically coerced to elongate with varying aspect ratios (AR) (that is, 1:1, 5:1, 10:1 and 15:1) at a fixed projection area of ~7000 μm 2 . The results showed engineered cellular anisotropy with an intermediate AR 5:1 and AR 10:1, promoting the expression of alpha smooth muscle actin (α-SMA) and enhancement of contractile output. Further mechanistic studies indicated that a threshold cell traction force of ~3.5 μN was required for SMC differentiation. Beyond the critical cytoskeleton tension, hMSCs respond to higher intracellular architectural cues such as the stress fiber (SF) alignment, SF subtype expression and diphosphorylated myosin regulatory light-chain activity to promote the expression and incorporation of α-SMA to the SF scaffold. These findings underscore the importance of exploiting biomimetic geometrical cues as an effective strategy to guide hMSC differentiation and are expected to guide the rational design of advanced tissue-engineered vascular grafts. Stem cell engineering: bio-inspired micropatterned hydrogel platform promotes adult stem cell differentiation into smooth muscle cells Muscle-mimicking geometries patterned on hydrogel facilitate the acquisition of a smooth-muscle-cell-like phenotype from human stem cells. Adult mesenchymal stem cells (MSCs) are a valuable source of cells for regenerative medicine. Now, researchers in Singapore and China have examined the complex interdependence of engineered cell shape and human transforming growth factor beta-1 treatment to direct smooth muscle cells differentiation of MSCs. They discovered that geometries resembling those of human smooth muscle cells provide the optimal shape for the expression and recruitment of the mechano-sensitive protein α-smooth muscle actin to the filamentous actin cytoskeleton. Based on these results, the researchers proposed an elegant model to describe the decision-making process that human MSCs take during differentiation into smooth muscle cells. The findings highlight the importance of using biomimetic cues for guiding differentiation of human MSCs. Inspired by the intrinsic morphology of smooth muscle cells (SMCs), a micropatterned hydrogel is developed to direct and define the boundary conditions for efficient SMC differentiation of human mesenchymal stem cells (hMSCs). The results show that in conjunction with TGF-β1 treatment, muscle-mimicking shapes with intermediate aspect ratios ranging from 5:1 to 10:1 exert the strongest pro-SMC differentiation effects in a structural–contractile force-dependent manner. These findings are expected to provide critical insights and design rules for vascular-related engineered tissue grafts.

Currently, infections following cataract surgery are not as effectively managed with antibiotic eye drops, which suffer from poor bioavailability of drug and low patient compliance. The ideal solution, which can help to overcome the issue of drug wastage and poor bioavailabilty, as well as the need for frequent applications (patient inconvenience), is a drug-eluting intraocular lens (IOL). We describe a novel approach to such a drug-eluting lens by using a peripheral IOL attachment as a drug depot to deliver antibiotics, Levofloxacin (LFX) or Moxifloxacin (MFX). In this work, drug was entrapped within a fully-degradable polymer, poly(L-lactide-co-ɛ-caprolactone) (PLC). The effects of drug loading and solvent type on drug release and film morphology were investigated using cast films. The study clearly demonstrated that a slower-evaporating solvent tetrahydrofuran (THF) resulted in a better surface morphology, as well as lower initial burst compared to dichloromethane (DCM), and hence, was better suited to developing a drug-eluting attachment with sustained release of drug. When attachments were fabricated with drugs at high loading percentages (20% and 25% in polymer), significant burst was observed compared to films: this is attributed to the higher surface-to-volume ratio of the attachments. When the levofloxacin (LFX) loading percentage was decreased to 3% and 5%, the attachments presented lower burst and sustained release with therapeutic efficacy. This work has demonstrated the potential of using an IOL attachment as a more efficacious anti-infective option compared to daily eye drops.