Explore the vast range of titles available.

The use of UAV (unmanned aerial vehicle) platforms and photogrammetry in bathymetric surveys has been established as a technological advancement that allows these activities to be conducted safely, more affordably, and at higher accuracy levels. This study evaluates the error levels obtained in photogrammetric UAV flights, with measurements obtained in surveys carried out in a controlled water body (pool) at different depths. We assessed the relationship between turbidity and luminosity factors and how this might affect the calculation of bathymetric survey errors using photogrammetry at different shallow-water depths. The results revealed that the highest luminosity generated the lowest error up to a depth of 0.97 m. Furthermore, after assessing the variations in turbidity, the following two situations were observed: (1) at shallower depths (not exceeding 0.49 m), increased turbidity levels positively contributed error reduction; and (2) at greater depths (exceeding 0.49 m), increased turbidity resulted in increased errors. In conclusion, UAV-based photogrammetry can be applied, within a known margin of error, in bathymetric surveys on underwater surfaces in shallow waters not exceeding a depth of 1 m.

The combination of light detection and ranging (LiDAR) sensors and unmanned aerial vehicle (UAV) platforms have garnered considerable interest in recent years because of the wide range of applications performed through the generation of point clouds, such as surveying, building layouts and infrastructure inspection. The attributed benefits include a shorter execution time and higher accuracy when surveying and georeferencing infrastructure and building projects. This study seeks to develop, integrate and use a LiDAR sensor system implemented in a UAV to collect topography data and propose a procedure for obtaining a georeferenced point cloud that can be configured according to the user’s needs. A structure was designed and built to mount the LiDAR system components to the UAV. Survey tests were performed to determine the system’s accuracy. An open-source ROS package was used to acquire data and generate point clouds. The results were compared against a photogrammetric survey, denoting a mean squared error of 17.1 cm in survey measurement reliability and 76.6 cm in georeferencing reliability. Therefore, the developed system can be used to reconstruct extensive topographic environments and large-scale infrastructure in which a presentation scale of 1/2000 or more is required, due to the accuracy obtained in the work presented.

The introduction of artificial intelligence methods and techniques in the construction industry has fostered innovation and constant improvement in the automation of monitoring and control processes at construction sites, although there are areas where more studies still need to be conducted. This paper proposes a method to determine the criticality of cracks in concrete samples. The proposed method uses a previously trained YOLOv4 neural network to identify concrete cracks. Then, the region of interest, determined by the bounding box resulting from the neural network model classification, is extracted. Finally, the extracted image is converted to negative grayscale to quantify the number of white pixels above a certain threshold, automatically allowing the system to characterize the fracture’s extent and criticality. The classification module reached a veracity between 98.36% and 99.75% when identifying five concrete crack types of failures in 1132 images. A qualitative analysis of the results obtained from the characterization module shows a promising alternative to evaluate the criticality of concrete cracks.