Explore the vast range of titles available.

Tea infusion is the most popular drink in Poland, and the tea bush is the most fluoride-rich among plants. Excessive fluoride intake can adversely affect human health by causing dental or skeletal fluorosis. This study aimed to determine the fluoride content in tea infusion depending on the tea types, the degree of fragmentation of the leaves, brewing time, and conducting a health risk assessment for the consumer in Poland. Infusions of 28 popular teas (green leafy tea, pu-erh leafy tea, white leaf tea, black leaf tea, black granulated tea, and black in bags) available in the Polish market were analyzed concerning a fluoride amount using the potentiometric method. Tea leaf size is an important parameter affecting fluoride’s release during tea brewing. An increase in fluoride content in the infusion was also shown with the extension of the brewing time. It was also revealed that significantly higher fluoride content was found in infusions of black tea prepared from tea in bags than from “loose” leaves. The conducted health risk assessment indicates the possibility of adverse health effects caused by fluoride consumption, particularly from infusions of black and green tea purchased in bags.

The aim of the paper was to study how the process of aromatisation with marjoram affected the composition of volatile fraction and antioxidant properties of rapeseed oil. Different methods of aromatisation were used: direct addition of marjoram essential oil, classical macerations of marjoram herb, and maceration assisted with ultrasound or microwave. The dominant aromatic component in the volatile fraction was γ-terpinene with concentration in the range from 3.15 μg/mL (microwave assisted maceration) to 8.82 μg/mL (classic maceration with shaking). The content of this compound in the mixture of rapeseed oil with essential oil was 152.09 μg/mL. The sample aromatized by the direct addition of essential oil contained the highest amount of volatile substances but simultaneously it had the lowest antioxidant activity.

Starch systems and their extrudates can be used as edible films, carriers, and encapsulants for bioactive substances in various industries, primarily the food, medicine, and pharmacy industries. Using appropriate modification methods, it is possible to alter their physicochemical properties to improve specific functional parameters, thereby enhancing their application potential. The aim of this study was to characterize potato starch extrudates enriched with two types of edible oils (rapeseed or sunflower) at concentrations of 3%, 6%, and 9%. Chemical modification was carried out using K2CO3 as a catalyst. The structure of native and modified starch extrudates was examined using optical/confocal microscopy, FTIR, and LTNA (low-temperature nitrogen adsorption). Analogous starch dispersions were studied using static and dynamic light scattering, SLS/DLS, nephelometric methods, and electrophoretic mobility measurements to determine surface charge levels and stability. Additionally, viscosity curves were determined as a function of time and temperature. It was found that starch extrudates with 6% sunflower oil content showed optimal functional properties, characterized by greater stability, higher structural order, and better oil complexation. These findings directly translate into significant potential applications, including the development of functional products in the food industry.

The objective of the study was to develop a new method for the determination of the total content of vitamin C and dehydroascorbic acid in food, based on the technique of differential pulse voltammetry with the use of a boron-doped diamond electrode modified with mercury film. A comparison was made between the results obtained with the developed method and a proposed reference method based on high-performance liquid chromatography with spectrophotometric detection. The reduction of dehydroascorbic acid was performed with the use of tris(2-carboxyethyl)phosphine. The interference caused by the presence of tris(2-carboxyethyl)phosphine during the voltammetric determination of ascorbic acid was effectively eliminated through a reaction with N-ethylmaleimide. The conducted validation of the voltammetric method indicated that correct results of analysis of the total content of vitamin C and ascorbic acid were obtained. Analysis of the content of dehydroascorbic acid was imprecise due to the application of the differential method. The results of the analyses and the determined validation parameters of the developed method are characterised by a high degree of conformance with the results obtained with the chromatographic reference method, which indicates the equivalence of the two methods.

The aim of the study was to evaluate sensory and phytochemical (polyphenols, flavonoids and caffeine) estimation of black and green tea brews obtained in an alternative way through brewing with the assistance of ultrasound. Brews produced with the application of sonication for 2 minutes and 1 minute were the most preferred by the sensory evaluation team. Evaluation of the brews in terms of component descriptors, i.e. fragrance, flavour and colour, was varied and depended on the kinds of tea and on the applied experimental factors. It was demonstrated that ultrasound have a significant effect on the extraction of active substances, i.e. polyphenols, flavonoids and caffeine, from black and green tea. The application of sonication caused a significant increase in the concentration of flavonoids (by ca. 29% and 73%), polyphenols (by ca. 34% and 41%) and caffeine (by ca. 51% and 60%) in the tea brews. RESUMO: O objetivo do estudo foi verificar a atividade sensorial e fitoquímica (polifenóis, flavonóides e cafeína) de infusões de chá preto e verde empregando o ultrassom. As infusões produzidas com a aplicação de sonicação por 2 e 1 minutos foram as mais preferidas pela equipe de avaliação sensorial. A avaliação das infusões em termos de descritores de componentes, isto é, fragrância, sabor e cor, foi variada e dependeu dos tipos de chás e dos fatores experimentais aplicados. Foi demonstrado que o ultrassom tem um efeito significativo na extração de substâncias ativas, ou seja, polifenóis, flavonóides e cafeína, do chá preto e verde. A aplicação de sonicação causou um aumento significativo na concentração de flavonóides (em cerca de 29% e 73%), polifenóis (em cerca de 34% e 41%) e cafeína (em cerca de 51% e 60%) das infusões de chá.

The analysis of total vitamin C content in food is most frequently performed by reducing dehydroascorbic acid to ascorbic acid, which is then assayed with the technique of high-performance liquid chromatography combined with spectrophotometric detection. Tris(2-carboxyethyl)phosphine is currently the only agent in use that efficiently reduces dehydroascorbic acid at pH < 2. Therefore, there is a continued need to search for new reducing agents that will display a high reactivity and stability in acidic solutions. The objective of the study was to verify the applicability of unithiol and tris(hydroxypropyl)phosphine for a reducing dehydroascorbic acid in an extraction medium with pH < 2. The conducted validation of the newly developed method of determining the total content of vitamin C using tris(hydroxypropyl)phosphine indicates its applicability for food analysis. The method allows obtaining equivalent results compared to the method based on the use of tris(2-carboxyethyl)phosphine. The low efficiency of dehydroascorbic acid reduction with the use of unithiol does not allow its application as a new reducing agent in vitamin C analysis.

A study was conducted on selected physicochemical properties of blackberry jelly-like desserts (kissel) prepared from physically modified starches (with various degrees of inhibition) and chemically modified starches (with various degrees of cross-linking). The desserts were conventionally sweetened with saccharose (S) or, as a dietary alternative, xylitol (X). The characteristics of changes in the viscosity of the kissels as a function of temperature and time were determined. It was noted that regardless of the sweetener used, the viscosity of the kissels increased with the decreasing degree of inhibition (high < medium < low). Regardless of the kind of modification of the starch used for the preparation of the kissels and of the kind of sweetener, thixotropy was observed. Desserts prepared from inhibited starch with xylitol (CL + X) were characterised by the biggest range of their hysteresis loop. Progressing retrogradation was noted with the decrease in the temperature of the experiment (+20 °C and +4 °C). After 7 days of storage, kissels sweetened with saccharose were characterised by a low transparency, which may indicate retarded retrogradation; however, on day 28, the transparency significantly increased, exceeding the values of transmittance for samples sweetened with xylitol. The tendency towards syneresis was tested at +4 °C and −22 °C. The substitution of saccharose with xylitol only caused a slight modification of viscosity. Regardless of the sweetener used and of the level of starch inhibition, lower ranges of the hysteresis loop were noted (apart from CL + X) than in the case of kissels obtained from chemically modified starches. Distinctly lower values of kissel “aging” indices were noted in the case of samples obtained from inhibited starches, and their colour did not significantly differ in relation to the dessert prepared from native starch.

The most popular method for the calculation of specific surface area is its determination from water vapour sorption isotherms. The study presented here has been designed for the purpose of optimisation and selection of the conditions of drying so as to allow the determination of specific surface area from plotted curves of the drying process. The results indicate that drying curves can be used as the basis for the determination of specific surface area, the values of which do not differ statistically significantly (α = 0.05) from those determined from isotherms of water vapour sorption (adsorption/desorption).

Mixtures of potato starch with oils (rapeseed and sunflower) were extruded. To improve the complexation of edible oils, a catalyst was added in amounts of 3 g, 6 g, and 9 g per 100 g of sample. The aim was to obtain potato starch extrudates with a high degree of complexation and edible oils during physical modification (extrusion) with the innovative use of K2CO3 as a catalyst. Selected functional properties (water solubility index and fat absorption index) and technological properties of the obtained extrudates (radial expansion index); color in the L*, a*, and b* systems, and the specific surface area was determined from the water vapor adsorption isotherm (SBET). The fat content was determined as external, internal, or bound, and complexed by amylose to assess the degree and manner of fat complexation during extrusion. Iodine-binding capacity and the complexing index were determined to confirm the formation of amylose-lipid complexes. The incorporation of edible oils resulted in a decrease in the radial expansion index and water solubility index compared to control samples. The extrudates were dark orange. Extrudates obtained at the temperature profile L: 80/80/80/60/60/50 °C, depending on the cooking oil, complexed from 48–79% of the introduced rapeseed oil and from 36–40% of the sunflower oil. The extrusion temperature profile (H: 100/100/100/75/75/60 °C) reduced the amount of bound lipid fractions. Using potassium carbonate in the extrusion of starch-lipid systems gives hope for further increasing the share of lipids in extruded mixtures.

Tea is a plant rich in compounds that positively impact human health. Still, it also contains large amounts of aluminum, which is toxic to humans and passes into the infusion during brewing. The presented research aims to determine the effect of adding lemon, Japanese quince, and quince juice to infusions of various types of teas on their aluminum content. It should be emphasized that research on the impact of Japanese quince and quince juices has not yet been published. Exposure to exceeding the safe level of aluminum consumption from tea infusions was also assessed. It has been shown that adding juices that lower the pH of infusions increases the aluminum content by up to 150%. The main factor influencing the increase in the aluminum content in tea infusions with additives is the lowering of the pH value, and other ingredients present in the juices do not have a significant impact. The health risk assessment indicates the possibility of adverse health effects from aluminum consumption, especially from black and green tea infusions with the addition of Japanese quince and lemon juices. It has been shown that quince juice can be recommended as an addition to tea infusions because it causes the smallest increase in aluminum content in the infusion among the juices tested.