Explore the vast range of titles available.

Internet data traffic capadty is rapidly reaching limits imposed by optical fiber nonlinear effects. Having almost exhausted available degrees of freedom to orthogonally multiplex data, the possibility is now being explored of using spatial modes of fibers to enhance data capadty. We demonstrate the viability of using the orbital angular momentum (OAM) of light to create orthogonal, spatially distinct streams of data-transmitting channels that are multiplexed in a single fiber. Over 1.1 kilometers of a specially designed optical fiber that minimizes mode coupling, we achieved 400-gigabits-per-second data transmission using four angular momentum modes at a single wavelength, and 1.6 terabits per second using two OAM modes over 10 wavelengths. These demonstrations suggest that OAM could provide an additional degree of freedom for data multiplexing in future fiber networks.

Space-time duality in paraxial optical wave propagation implies the existence of intriguing effects when light interacts with a material exhibiting two refractive indexes separated by a boundary in time. The direct consequence of such time-refraction effect is a change in the frequency of light while leaving the wavevector unchanged. Here, we experimentally show that the effect of time refraction is significantly enhanced in an epsilon-near-zero (ENZ) medium as a consequence of the optically induced unity-order refractive index change in a sub-picosecond time scale. Specifically, we demonstrate broadband and controllable shift (up to 14.9 THz) in the frequency of a light beam using a time-varying subwavelength-thick indium tin oxide (ITO) film in its ENZ spectral range. Our findings hint at the possibility of designing (3 + 1)D metamaterials by incorporating time-varying bulk ENZ materials, and they present a unique playground to investigate various novel effects in the time domain. Here, the authors present an experimental demonstration of adiabatic frequency conversion using the concept of time boundary by exploiting the properties of an ITO film operating near its epsilon-near-zero frequency. They demonstrate a large and controllable shift up to 14.9 THz.

Due to its absorption properties in atmosphere, the mid-infrared (mid-IR) region has gained interest for its potential to provide high data capacity in free-space optical (FSO) communications. Here, we experimentally demonstrate wavelength-division-multiplexing (WDM) and mode-division-multiplexing (MDM) in a ~0.5 m mid-IR FSO link. We multiplex three ~3.4 μm wavelengths (3.396 μm, 3.397 μm, and 3.398 μm) on a single polarization, with each wavelength carrying two orbital-angular-momentum (OAM) beams. As each beam carries 50-Gbit/s quadrature-phase-shift-keying data, a total capacity of 300 Gbit/s is achieved. The WDM channels are generated and detected in the near-IR (C-band). They are converted to mid-IR and converted back to C-band through the difference frequency generation nonlinear processes. We estimate that the system penalties at a bit error rate near the forward error correction threshold include the following: (i) the wavelength conversions induce ~2 dB optical signal-to-noise ratio (OSNR) penalty, (ii) WDM induces ~1 dB OSNR penalty, and (iii) MDM induces ~0.5 dB OSNR penalty. These results show the potential of using multiplexing to achieve a ~30X increase in data capacity for a mid-IR FSO link. A 300-Gbit/s free-space optical communication system is demonstrated in the mid-IR wavelength region by using both wavelength- and mode-division multiplexing.

The recognition in the 1990s that light beams with a helical phase front have orbital angular momentum has benefited applications ranging from optical manipulation to quantum information processing. Recently, attention has been directed towards the opportunities for harnessing such beams in communications. Here, we demonstrate that four light beams with different values of orbital angular momentum and encoded with 42.8 × 4 Gbit s −1 quadrature amplitude modulation (16-QAM) signals can be multiplexed and demultiplexed, allowing a 1.37 Tbit s −1 aggregated rate and 25.6 bit s −1  Hz −1 spectral efficiency when combined with polarization multiplexing. Moreover, we show scalability in the spatial domain using two groups of concentric rings of eight polarization-multiplexed 20 × 4 Gbit s −1 16-QAM-carrying orbital angular momentum beams, achieving a capacity of 2.56 Tbit s −1 and spectral efficiency of 95.7 bit s −1  Hz −1 . We also report data exchange between orbital angular momentum beams encoded with 100 Gbit s −1 differential quadrature phase-shift keying signals. These demonstrations suggest that orbital angular momentum could be a useful degree of freedom for increasing the capacity of free-space communications. Researchers demonstrate the ability to multiplex and transfer data between twisted beams of light with different amounts of orbital angular momentum — a development that provides new opportunities for increasing the data capacity of free-space optical communications links.

The integration of high-speed optical communication and distributed sensing could bring intelligent functionalities to ubiquitous optical fibre networks, such as urban structure imaging, ocean seismic detection, and safety monitoring of underground embedded pipelines. This work demonstrates a scheme of integrated sensing and communication in an optical fibre (ISAC-OF) using the same wavelength channel for simultaneous data transmission and distributed vibration sensing. The scheme not only extends the intelligent functionality for optical fibre communication system, but also improves its transmission performance. A periodic linear frequency modulation (LFM) light is generated to act as the optical carrier and sensing probe in PAM4 signal transmission and phase-sensitive optical time-domain reflectometry (Φ-OTDR), respectively. After a 24.5 km fibre transmission, the forward PAM4 signal and the carrier-correspondence Rayleigh backscattering signal are detected and demodulated. Experimental results show that the integrated solution achieves better transmission performance (~1.3 dB improvement) and a larger launching power (7 dB enhancement) at a 56 Gbit/s bit rate compared to a conventional PAM4 signal transmission. Meanwhile, a 4 m spatial resolution, 4.32- nε / H z strain resolution, and over 21 kHz frequency response for the vibration sensing are obtained. The proposed solution offers a new path to further explore the potential of existing or future fibre-optic networks by the convergence of data transmission and status sensing. In addition, such a scheme of using shared spectrum in communication and distributed optical fibre sensing may be used to measure non-linear parameters in coherent optical communications, offering possible benefits for data transmission. A scheme of integrated sensing and communication in an optical fibre (ISAC-OF) using the same wavelength channel for simultaneous high-speed data transmission and distributed vibration sensing.

Structured light has gained much interest in increasing communications capacity through the simultaneous transmission of multiple orthogonal beams. This paper gives a perspective on the current state of the art and future challenges, especially with regards to the use of multiple orbital angular momentum modes for system performance enhancement.

The use of optical interconnects has burgeoned as a promising technology that can address the limits of data transfer for future high-performance silicon chips. Recent pushes to enhance optical communication have focused on developing wavelength-division multiplexing technology, and new dimensions of data transfer will be paramount to fulfill the ever-growing need for speed. Here we demonstrate an integrated multi-dimensional communication scheme that combines wavelength- and mode- multiplexing on a silicon photonic circuit. Using foundry-compatible photonic inverse design and spectrally flattened microcombs, we demonstrate a 1.12-Tb/s natively error-free data transmission throughout a silicon nanophotonic waveguide. Furthermore, we implement inverse-designed surface-normal couplers to enable multimode optical transmission between separate silicon chips throughout a multimode-matched fibre. All the inverse-designed devices comply with the process design rules for standard silicon photonic foundries. Our approach is inherently scalable to a multiplicative enhancement over the state of the art silicon photonic transmitters. The authors demonstrate a multi-dimensional communication scheme that combines wavelength- and mode- multiplexing on photonic integrated circuits using foundry-compatible photonic inverse design and spectrally flattened microcombs

Can “twisted” light beams enhance optical communication systems? A conventional propagating free-space laser beam typically has an approximately flat phase front and exhibits an intensity profile that decreases as a function of the radial distance from the beam center. However, in the 1990s, it was shown that propagating light waves can contain an interesting property known as orbital angular momentum (OAM) ( 1 ). OAM implies that the light wave's phase front is twisting along the direction of propagation. This twisting of the phase front into a corkscrew shape results in a doughnut-like ring intensity profile ( 2 ). It was then demonstrated that a given optical beam with OAM can be encoded with data ( 3 – 5 ). Moreover, a radiowave field trial showed that a free-space radio data link can use OAM for transmission ( 6 ). Recent work has demonstrated a 2.56 terabits per second (Tbit/s) free-space optical data transfer using OAM ( 7 ).

There is a continuing growth in the demand for data bandwidth, and the multiplexing of multiple independent data streams has the potential to provide the needed data capacity. One technique uses the spatial domain of an electromagnetic (EM) wave, and space division multiplexing (SDM) has become increasingly important for increased transmission capacity and spectral efficiency of a communication system. A subset of SDM is mode division multiplexing (MDM), in which multiple orthogonal beams each on a different mode can be multiplexed. A potential modal basis set to achieve MDM is to use orbital angular momentum (OAM) of EM waves. In such a system, multiple OAM beams each carrying an independent data stream are multiplexed at the transmitter, propagate through a common medium and are demultiplexed at the receiver. As a result, the total capacity and spectral efficiency of the communication system can be multiplied by a factor equal to the number of transmitted OAM modes. Over the past few years, progress has been made in understanding the advantages and limitations of using multiplexed OAM beams for communication systems. In this review paper, we highlight recent advances in the use of OAM multiplexing for high-capacity free-space optical and millimetre-wave communications. We discuss different technical challenges (e.g. atmospheric turbulence and crosstalk) as well as potential techniques to mitigate such degrading effects. This article is part of the themed issue ‘Optical orbital angular momentum’.

The large number of spatial modes supported by standard multimode fibers is a promising platform for boosting the channel capacity of quantum and classical communications by orders of magnitude. However, the practical use of long multimode fibers is severely hampered by modal crosstalk and polarization mixing. To overcome these challenges, we develop and experimentally demonstrate a vectorial time reversal technique, which is accomplished by digitally pre-shaping the wavefront and polarization of the forward-propagating signal beam to be the phase conjugate of an auxiliary, backward-propagating probe beam. Here, we report an average modal fidelity above 80% for 210 Laguerre-Gauss and Hermite-Gauss modes by using vectorial time reversal over an unstabilized 1-km-long fiber. We also propose a practical and scalable spatial-mode-multiplexed quantum communication protocol over long multimode fibers to illustrate potential applications that can be enabled by our technique. The use of long multimode fibers for multiplexed quantum communication is hindered by modal crosstalk and polarisation mixing. Here, the authors use an auxiliary laser beam sent backwards from Bob to Alice, allowing her to pre-compensate for the spatial distortions and polarisation scrambling.