Explore the vast range of titles available.

We demonstrate in this report a new constructive method of fabricating white organic light-emitting devices (OLEDs) with a flexible plastic film embedded with yellow phosphor. The flexible film is composed of polydimethylsiloxane (PDMS) and fabricated by using spin coating followed by peeling technology. From the results, the resultant electroluminescent spectrum shows the white OLED to have chromatic coordinates of 0.38 and 0.54 and correlated color temperature of 4200 K. The warm white OLED exhibits the yield of 10.3 cd/A and the luminous power efficiency of 5.4 lm/W at a luminance of 1000 cd/m2. A desirable Lambertian-like far-field pattern is detected from the white OLEDs with the yellow phosphor containing PDMS film. This method is simple, reproducible, and cost-effective, proving to be a highly feasible approach to realize white OLED.

As there is no sufficient support between the single moving tool and fixture, the formed metal sheet is easy to bend in single point incremental forming (SPIF). Double sided incremental forming (DSIF) is proposed in which two tools are used on each side of the sheet to improve the components forming accuracy. Element finite method is introduced to simulate the forming process with both DSIF and SPIF toolpaths and the component geometric accuracies are compared. The simulation result shows the DSIF toolpaths can obtain better geometric accuracy than SPIF.

This work reports the color-tunable mixed photoluminescence (PL) emission from an Alq3 organic layer in an Au-Alq3-Au plasmonic structure through the combination of organic fluorescence emission and another form of emission that is enabled by the surface plasmons in the plasmonic structure. The emission wavelength of the latter depends on the Alq3 thickness and can be tuned within the Alq3 fluorescent spectra. Therefore, a two-color broadband, color-tunable mixed PL structure was obtained. Obvious changes in the Commission Internationale d’Eclairage (CIE) coordinates and the corresponding emission colors of Au-Alq3-Au samples clearly varied with the Alq3 thickness (90, 130, and 156 nm).

目的:对比分析脾脏、腹腔和骨髓源性巨噬细胞(SPMs、PCMs和BMs)在安静及极化状态下的差异。创新点:首次对比分析脾脏、腹腔和骨髓源性巨噬细胞在安静(M0)及极化状态(M1和M2)下的特征。方法:通过小鼠脾脏研磨及单细胞贴壁获得脾源性巨噬细胞;腹腔灌洗及细胞贴壁获得腹腔源性巨噬细胞;骨髓贴壁细胞在巨噬细胞集落刺激因子体外刺激下培养7天获得骨髓源性巨噬细胞。三种细胞即为M0型巨噬细胞,M0在干扰素及脂多糖刺激下获得M1型巨噬细胞,M0在白介素4(IL-4)刺激下获得M2型巨噬细胞。通过流式细胞仪分析三种类型巨噬细胞在三种状态下的Ⅱ类主要组织相容性复合体(MHC Ⅱ)和CD86表达差异。通过实时荧光定量聚合酶链式反应(q PCR)检测肿瘤坏死因子α(TNF-α)、白介素1β(IL-1β)、甘露糖受体(MR)和类几丁质酶3样分子(Ym1)的表达变化。结论:骨髓贴壁细胞培养能获得最大量的同源巨噬细胞(图1和2),但表型偏向于M2型巨噬细胞(图3和4)。三种巨噬细胞均能极化为M1和M2型巨噬细胞(图5),其中SPMs具有更强的M1型极化能力,而M2型极化能力之间未见明显差异(图6)。综上所述,三种细胞无论在安静及极化状态下均具有不同的特征,骨髓可以获得大量同源性巨噬细胞,但性质不同于组织源性的脾脏和腹腔巨噬细胞。

Experimental demonstration of resistive neural networks has been the recent focus of hardware implementation of neuromorphic computing. Capacitive neural networks, which call for novel building blocks, provide an alternative physical embodiment of neural networks featuring a lower static power and a better emulation of neural functionalities. Here, we develop neuro-transistors by integrating dynamic pseudo-memcapacitors as the gates of transistors to produce electronic analogs of the soma and axon of a neuron, with “leaky integrate-and-fire” dynamics augmented by a signal gain on the output. Paired with non-volatile pseudo-memcapacitive synapses, a Hebbian-like learning mechanism is implemented in a capacitive switching network, leading to the observed associative learning. A prototypical fully integrated capacitive neural network is built and used to classify inputs of signals. Though memristors can potentially emulate neuron and synapse functionality, useful signal energy is lost to Joule heating. Here, the authors demonstrate neuro-transistors with a pseudo-memcapacitive gate that actively process signals via energy-efficient capacitively-coupled neural networks.

Wound healing is a complex tissue regeneration process involving many changes in multiple physiological parameters. The pH and temperature of a wound site have long been recognized as important biomarkers for assessing wound healing status. For effective wound management, wound dressings integrated with wearable sensors and systems used for continuous monitoring of pH and temperature have received much attention in recent years. Herein, recent advances in the development of wearable pH and temperature sensors and systems based on different sensing mechanisms for wound status monitoring and treatment are comprehensively summarized. Challenges in the areas of sensing performance, infection identification threshold, large-area 3-dimensional detection, and long-term reliable monitoring in current wearable sensors/systems and emerging solutions are emphasized, providing critical insights into the development of wearable sensors and systems for wound healing monitoring and management.

The silkworm Bombyx mori is an important economic insect for producing silk, the “queen of fabrics”. The currently available genomes limit the understanding of its genetic diversity and the discovery of valuable alleles for breeding. Here, we deeply re-sequence 1,078 silkworms and assemble long-read genomes for 545 representatives. We construct a high-resolution pan-genome dataset representing almost the entire genomic content in the silkworm. We find that the silkworm population harbors a high density of genomic variants and identify 7308 new genes, 4260 (22%) core genes, and 3,432,266 non-redundant structure variations (SVs). We reveal hundreds of genes and SVs that may contribute to the artificial selection (domestication and breeding) of silkworm. Further, we focus on four genes responsible, respectively, for two economic (silk yield and silk fineness) and two ecologically adaptive traits (egg diapause and aposematic coloration). Taken together, our population-scale genomic resources will promote functional genomics studies and breeding improvement for silkworm. Tong et al. describe a super pangenome assembled from long-read sequences of 545 wild and domesticated silkworms. Naturally selected (diapause, aposemantic coloration) or artificially selected (silk yield and fineness) sets of genes are delineated.

Psychological help-seeking for suicidal ideation is a critical aspect of effective suicide prevention. Past research has documented low help-seeking amongst rural residents in China. This study investigates the patterns and predictors of help-seeking intentions for suicidal ideation versus mental (depression) and physical (heart disease) health conditions among Chinese rural residents using General Help-Seeking Questionnaire Vignette version. A total of 143 rural participants from sixteen villages in Hubei province of China completed the survey via home-visiting interviews. Results revealed a general trend that the help-seeking intentions decreased as the helping sources shifted from close others (spouses, family, etc.) to professional helpers and online sources. Additionally, rural residents with higher educational levels, high self-efficacy, and more severe suicide ideations were more willing to seek help; and suicide literacy was found to be negatively associated with help-seeking intentions. The implications of the research findings are discussed.

Background Levan is a well-known homopolymer of fructose composed predominantly of β-(2, 6) fructofuranosyl linkages in the backbone with occasional β-(2, 1) linkages in the branch chains with varied applications. However, high production cost due to low yield of microbial levan has become a bottleneck for its practical applications. Furthermore, factors affecting the molecular mass of the synthesized levan by Leuconostoc spp. during prolonged cultivation is not fully elucidated. Methods The cultivation condition for Leuconostoc citreum BD1707 to synthesize levan was optimized by single-factor experiments and subsequently with response surface methodology (RSM). The average molecular weight (Mw) of levan synthesized by the strain L.citreum BD1707 under the optimized cultivation conditions was monitored by high-performance size exclusion chromatography (HPSEC). Finally, the enzyme with levan-degrading activity was determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Results The levan yield of BD1707 reached 34.86 g/L with a corresponding productivity of 7.47 g/L/d under the optimal cultivation conditions deduced by RSM, i.e., cultivation at 26 °C and 200 rpm for 112 h in tomato juice supplemented with 172 g/L sucrose with an initial pH value of 6.12. The Mw of levan reached a peak value of 2.320 × 10 7  Da at 6 h of cultivation under the optimized cultivation conditions and then gradually decreased to 8.809 × 10 6  Da after 120 h of cultivation. Conclusion The levan yield of the strain L.citreum BD1707 could be sufficiently enhanced via cultivation condition optimization. The decrease in molecular mass of the synthesized levan was attributed predominantly to the hydrolytic activity of levansucrase secreted by L.citreum BD1707 during cultivation, with an estimated Mw of 130 KD by SDS-PAGE, while the effect of acid hydrolysis could be nearly neglected.

Anti-PD-1 therapy and chemotherapy is a recommended first-line treatment for recurrent or metastatic nasopharyngeal carcinoma, but the role of PD-1 blockade remains unknown in patients with locoregionally advanced nasopharyngeal carcinoma. We assessed the addition of sintilimab, a PD-1 inhibitor, to standard chemoradiotherapy in this patient population. This multicentre, open-label, parallel-group, randomised, controlled, phase 3 trial was conducted at nine hospitals in China. Adults aged 18–65 years with newly diagnosed high-risk non-metastatic stage III–IVa locoregionally advanced nasopharyngeal carcinoma (excluding T3–4N0 and T3N1) were eligible. Patients were randomly assigned (1:1) using blocks of four to receive gemcitabine and cisplatin induction chemotherapy followed by concurrent cisplatin radiotherapy (standard therapy group) or standard therapy with 200 mg sintilimab intravenously once every 3 weeks for 12 cycles (comprising three induction, three concurrent, and six adjuvant cycles to radiotherapy; sintilimab group). The primary endpoint was event-free survival from randomisation to disease recurrence (locoregional or distant) or death from any cause in the intention-to-treat population. Secondary endpoints included adverse events. This trial is registered with ClinicalTrials.gov (NCT03700476) and is now completed; follow-up is ongoing. Between Dec 21, 2018, and March 31, 2020, 425 patients were enrolled and randomly assigned to the sintilimab (n=210) or standard therapy groups (n=215). At median follow-up of 41·9 months (IQR 38·0–44·8; 389 alive at primary data cutoff [Feb 28, 2023] and 366 [94%] had at least 36 months of follow-up), event-free survival was higher in the sintilimab group compared with the standard therapy group (36-month rates 86% [95% CI 81–90] vs 76% [70–81]; stratified hazard ratio 0·59 [0·38–0·92]; p=0·019). Grade 3–4 adverse events occurred in 155 (74%) in the sintilimab group versus 140 (65%) in the standard therapy group, with the most common being stomatitis (68 [33%] vs 64 [30%]), leukopenia (54 [26%] vs 48 [22%]), and neutropenia (50 [24%] vs 46 [21%]). Two (1%) patients died in the sintilimab group (both considered to be immune-related) and one (<1%) in the standard therapy group. Grade 3–4 immune-related adverse events occurred in 20 (10%) patients in the sintilimab group. Addition of sintilimab to chemoradiotherapy improved event-free survival, albeit with higher but manageable adverse events. Longer follow-up is necessary to determine whether this regimen can be considered as the standard of care for patients with high-risk locoregionally advanced nasopharyngeal carcinoma. National Natural Science Foundation of China, Key-Area Research and Development Program of Guangdong Province, Natural Science Foundation of Guangdong Province, Overseas Expertise Introduction Project for Discipline Innovation, Guangzhou Municipal Health Commission, and Cancer Innovative Research Program of Sun Yat-sen University Cancer Center. For the Chinese translation of the abstract see Supplementary Materials section.