Explore the vast range of titles available.

The Central Asian Orogenic Belt (c. 1000-250 Ma) formed by accretion of island arcs, ophiolites, oceanic islands, seamounts, accretionary wedges, oceanic plateaux and microcontinents in a manner comparable with that of circum-Pacific Mesozoic-Cenozoic accretionary orogens. Palaeomagnetic and palaeofloral data indicate that early accretion (Vendian-Ordovician) took place when Baltica and Siberia were separated by a wide ocean. Island arcs and Precambrian microcontinents accreted to the active margins of the two continents or amalgamated in an oceanic setting (as in Kazakhstan) by roll-back and collision, forming a huge accretionary collage. The Palaeo-Asian Ocean closed in the Permian with formation of the Solonker suture. We evaluate contrasting tectonic models for the evolution of the orogenic belt. Current information provides little support for the main tenets of the one- or three-arc Kipchak model; current data suggest that an archipelago-type (Indonesian) model is more viable. Some diagnostic features of ridge-trench interaction are present in the Central Asian orogen (e.g. granites, adakites, boninites, near-trench magmatism, Alaskan-type mafic-ultramafic complexes, high-temperature metamorphic belts that prograde rapidly from low-grade belts, rhyolitic ash-fall tuffs). They offer a promising perspective for future investigations.

As one of the largest Phanerozoic orogens in the world, the Central Asian Orogenic Belt (CAOB) is a natural laboratory for studies of continental dynamics and metallogenesis. This paper summarizes the research progresses of the accretionary processes and metallogenesis of the CAOB since the People’s Republic of China was founded, and puts forward the prospect for future research. During the early period (1950s–1970s), several geological theories were applied to explain the geological evolution of Central Asia. In the early period of China’s reform and opening-up, the plate tectonics theory was applied to explain the evolution of the northern Xinjiang and Xingmeng regions, and the opinion of subduction-collision between Siberian, Kazakhstan, and China-North Korea-Tarim plates was proposed. The idea of the Solonker-Yanbian suture zone was established. In the 1990s, the study of the CAOB entered a period of rapid development. One school of scholars including geologists from the former Soviet Union proposed a multi-block collision model for the assemblage of the CAOB. In contrast, another school of scholars, led by a Turkish geologist, Celal Şengör, proposed that the Altaids was formed through the growth and strike-slip duplicates of a single island arc, and pointed out that the Altaids is a special type of collisional orogen. During this period, Chinese geologists carried out a lot of pioneering researches on ophiolites and high-pressure metamorphic rocks in northern China, and confirmed the main suture zones accordingly. In 1999, the concept of “Central Asian metallogenic domain” was proposed, and it became one of the three major metallogenic domains in the world. Since the 21st century, given the importance for understanding continental accretion and metallogenic mechanism, the CAOB has become the international academic forefront. China has laid out a series of scientific research projects in Central Asia. A large number of important scientific research achievements have been spawned, including the tectonic attribution of micro-continents, timing and tectonic settings of ophiolites, magmatic arcs, identification and anatomy of accretionary wedges, regional metamorphism-deformation, (ultra)high-pressure metamorphism, ridge subduction, plume-plate interaction, archipelagic paleogeography and spatio-temporal framework of multiple accretionary orogeny, continental growth, accretionary metallogenesis, structural superposition and transformation, etc. These achievements have made important international influences. There still exist the following aspects that need further study: (1) Early evolution history and subduction initiation of the Paleo-Asian Ocean; (2) The accretionary mechanism of the extroversion Paleo-Asian Ocean; (3) The properties of the mantle of the Paleo-Asian Ocean and their spatiotemporal distribution; (4) The interaction between the Paleo-Asian Ocean and the Tethys Ocean; (5) Phanerozoic continental growth mechanism and its global comparison; (6) Accretionary metallogenic mechanism of the Central Asian metallogenic domain; and (7) Continental transformation mechanism.

How the continental lithosphere deforms far away from plate boundaries has been long debated. The Tianshan is a type-example of ongoing lithospheric deformation in an intracontinental setting. It formed during the Paleozoic accretion of the Altaids and was rejuvenated in the Cenozoic, which might be a far-field response to the India-Asia collision. Here we present seismic images of the lithosphere across the central Tianshan, which were constructed from receiver functions and Rayleigh wave dispersions along a N–S-trending linear seismic array. We observe an extensively deformed lithosphere in the Tianshan with inherited, structurally controlled brittle deformation in the shallow crust and plastic deformation near the Moho. We find that earlier multiple accretionary structures were preserved in the crust, which was deformed by pure-shear shortening in the south and thick-skinned tectonics in the north but was limitedly underthrusted by surrounding blocks. A balanced cross-section of Moho discontinuities supports the concept that intracontinental deformation in the Tianshan intensified synchronously with the direct contact between the underthrusting Indian slab and the Tarim Craton in the Late Miocene (~10 Ma). These findings provide a robust and unified seismic model for the Tianshan Orogen, and confirm that effective delivery of the India-Asia collision stress induced the rejuvenation of this intracontinental orogen. This study presents seismic images across the central Tianshan. The results show that Tianshan’s crust was extensively deformed according to its inherited properties, but was limitedly underthrusted by surrounding blocks

The pattern and timing of collision between India and Eurasia have long been a major concern of the international community. However, no consensus has been reached hitherto. To explore and resolve the disagreements in the Himalayan study,in this paper we begin with the methodology and basic principles for the anatomy of composition and nature of convergent margins,then followed by an effort to conduct a similar anatomy for the India-Eurasia collision. One of the most common patterns of plate convergence involves a passive continental margin, an active continental margin and intra-oceanic basins together with accreted terranes in between. The ultimate configuration and location of the terminal suture zone are controlled by the basal surface of the accretionary wedge, which may show fairly complex morphology with Z-shape and fluctuant geometry. One plausible method to determine the terminal suture zone is to dissect the compositions and structures of active continental margins. It requires a focus on various tectonic elements belonging to the upper plate, such as accretionary wedges, high-pressure（HP）-ultra-high-pressure（UHP） metamorphic rocks, Barrovian-type metamorphic rocks and basement nappes, together with superimposed forearc basins.Such geological records can define the extreme limits and the intervening surface separating active margin from the passive one,thus offering a general sketch for the surface trace of the terminal suture zone often with a cryptic feature. Furthermore, the occurrence of the cryptic suture zone in depth may be constrained by geophysical data, which, in combination with outcrop studies of HP-UHP metamorphic rocks, enables us to outline the terminal suture zone. The southern part of the Himalayan orogen records complicated temporal and spatial features, which are hard to be fully explained by the classic “two-plate-one-ocean” template,therefore re-anatomy of the compositions and nature for this region is necessitated. Taking advantage of the methodology and basic principles of plate convergence anatomy and synthesizing previous studies together with our recent research, we may gain new insights into the evolution of the Himalayan orogeny.（1） The Yarlung-Zangbo ophiolite is composed of multiple tectonic units rather than a single terminal suture zone, and a group of different tectonic units were juxtaposed against each other in the backstop of the Gangdese forearc.（2） The Tethyan Himalayan Sequence（THS） contains mélanges with typical block-in-matrix structures, uniform southwards paleocurrents and age spectra of detrital zircons typical of Eurasia continent. All of these facts indicate that the THS belonged to Eurasia plate before the terminal collision, emplaced in the forearc of the Gangdese arc.（3） The Greater Himalayan Crystalline Complex（GHC） and Lesser Himalayan Sequence（LHS） comprise complex components including eclogites emplaced into the GHC and the upper part of the LHS. Judging from the fact that HP-UHP metamorphic rocks are exhumed and emplaced in the upper plate, the GHC and the upper part of the LHS where eclogite occur should be assigned to the upper plate, lying above the terminal subduction zone surface. It is the very surface along which the continuous subduction of the India subcontinent occurred, therefore acting as the terminal, cryptic suture. From the suture further southward, the bulk rock associations of the LHS and Sub-Himalayan Sequence（Siwalik） show little affinity of mélange, probably belonging to the foreland system of the India plate. By the anatomy of tectonic features of all the tectonic units in the Himalayan orogen as well as the ages of the subduction-accretion related deformation, we conclude that the terminal India-Eurasia collision occurred after 14 Ma, the timing of the metamorphism of the eclogites emplaced into the upper plate. The development of rifts stretching in N-S direction in Tibet and tectonic events with the transition from sinistral to dextral movements in shear zones, such as the Ailaoshan fault in East Tibet, can coordinately reflect the scale and geodynamic influence of the India-Eurasia convergence zone.By conducting a detailed anatomy of the southern Himalayas, we propose a new model for the final collision-accretion of the Himalayan orogeny. Our study indicates that the anatomy of structures, composition, and tectonic nature is the key to a better understanding of orogenic belts, which may apply to all the orogenic belts around the world. We also point out that several important issues regarding the detailed anatomy of the structures, compositions and tectonic nature of the Himalayan orogeny in future.

Expanded ocean anoxia and global cooling have been invoked as major causal mechanisms for the Late Ordovician mass extinction, but the factors underpinning the extinction remain unresolved. Here, we document two intervals of particularly intense phosphorus recycling in marine rocks deposited across a bathymetric transect in the Yangtze Shelf Sea. The first occurred during the initial phase of the extinction and, coincident with global cooling, drove the development of ocean euxinia on the shelf. The second re-established shelf euxinia after the peak of glaciation, leading to the second phase of extinction. Integration of these data into a global biogeochemical model indicates that phosphorus recycling would have doubled the long-term burial rate of organic carbon, driving ~4°C of global cooling. Thus, through its impact on both the spread of anoxia and global cooling, extensive redox-promoted phosphorus recycling was a critical factor in Earth’s first catastrophic loss of animal life.

The tectonics of the Proto-Tethys Ocean during the Early Devonian are still heavily debated in the North Qilian orogen. In order to further constrain this issue, we explore geology, chronology, geochemistry, and isotopes of three newly discovered Early Devonian adakitic granitoids of the Jiayuguan complex in the North Qilian orogen, NW China. The granitoids exhibit typical adakitic geochemical signatures with high SiO2 (>56%), Na, Al, and Sr contents, depleted in Yb and Y, and high Sr/Y (82-277) and (La/Yb)N (7.65-15.16) values. Additionally, their high Mg# (62-68) and εHf(t) (+6.5-+11.9) values indicate partial melting of slab genesis. However, they have comparatively low εNd(t) (-2.3-+0.13). Their incompatible Hf and Nd isotopes could be caused by contamination between the source magma and continental crust during the emplacement processes. The three adakitic granitoids yield zircon U-Pb ages of 415-403 Ma, implying that the northern Qilian Ocean was subducting until the Early Devonian (403 Ma) and that young/hot/ridge subduction formed the Jiayuguan adakitic granitoids. Combined with regional data, we propose that the Proto-Tethys Ocean was subducting until 403 Ma in the Qilian area.

The Chinese Altai-East Junggar collage in the southern Altaids hosts three metallogenic belts, which are, from north to south: (1) a volcanogenic massive sulphide (VMS) Cu-Pb-Zn belt; (2) a belt of shear zone-related gold deposits; (3) a porphyry Cu-Au-Mo belt. The VMS deposits formed in two pulses (c. 405 Ma and c. 375 Ma) in the Chinese Altai arc. The porphyry deposits developed in three pulses in the East Junggar arc, the first two synchronous with the VMS mineralization and the third at c. 330 Ma. The shear zone-related gold deposits developed in the late Carboniferous to Permian at the contact between the Chinese Altai and East Junggar arcs. Time-space distributions of diverse ore deposits across the Altai-East Junggar collage indicate that the collage developed from two independent arcs, the Chinese Altai and the East Junggar. The VMS and porphyry deposits developed in the Chinese Altai and East Junggar arcs, respectively. The Chinese Altai arc is interpreted to be a Japanese-type arc and the East Junggar arc a Mariana-type arc. During the latest Palaeozoic, the two arcs were juxtaposed by the Erqis Fault, when many shear zone-related lode gold deposits were emplaced. These metallogenic distributions were a likely response to spatially localized mechanisms of crust growth and to the tectonic evolution of the Altai-East Junggar collage, and they are consistent with interpretation of the Altaids as a multiple subduction-accretion collage.

The Meso-Cenozoic tectonic activities of the Central Asian Orogenic Belt (CAOB) played an important role in controlling the present-day topography of Central Asia. The Altai orogenic belt is a key component in the southern CAOB; so far, there is still a lack of sufficient constraints on the time and mechanism of its tectonic reactivation since the Mesozoic. In this contribution, we present new zircon and apatite (U-Th)/He and apatite fission track thermochronological data from granitoid samples in the Habahe area, western Altai orogenic belt. Therein zircon (U-Th)/He ages range from ∼230 to ∼238 Ma, apatite fission track central ages are ∼140-157 Ma, and apatite (U-Th)/He ages vary from ∼134 to ∼149 Ma. Based on the associated thermal history modeling results, the Habahe area underwent a moderate cooling during the Late Triassic to Middle Jurassic (∼230-170 Ma) with a cooling rate of ∼0.8-1.1°C/Ma and a subsequent moderate to slightly rapid cooling stage during the Middle Jurassic to Early Cretaceous (170-130 Ma) with a cooling rate of 1.5-2.3°C/Ma. We propose that this prolonged cooling stage occurred under a long-lasting contractional tectonism in the western Altai throughout the early Mesozoic, which was produced by multiplate convergence in East Asia during this period, mainly including the consumption of the Mongol-Okhotsk Ocean in the northeast and the Meso-Tethys Ocean in the south. The region experienced rather limited Late Cretaceous-Cenozoic cooling and exhumation due to insufficient reactivation and weak surficial erosion.

The connection between the North China Craton (NCC) and contiguous cratons is important for the configuration of the Nuna supercontinent. Here we document a new Paleoproterozoic high-pressure (HP) complex dominated by garnet websterite on the northern margin of the NCC. The peak metamorphism of the garnet websterite was after ∼1.90 Ga when it was subducted to eclogite facies at ∼2.4 GPa, then exhumed back to granulite facies at ∼0.9 GPa before ∼1.82 Ga. The rock associations with their structural relationships and geochemical affinities are comparable to those of supra-subduction zone ophiolites, and supported by subduction-related signatures of gabbros and basalts. We propose that a ∼1.90 Ga oceanic fragment was subducted and exhumed into an accretionary complex along the northern margin of the NCC. Presence of the coeval Sharyzhalgai complex with comparable HP garnet websterites in the southern Siberian active margin favours juxtaposition against the NCC in the Paleoproterozoic. Identifying past continental configurations is important for our understanding of the Earth system. Here, the authors present mapping and geochemical analyses that connect the North China Craton with other continents, with implications for the Nuna/Columbia supercontinent configuration at 1.8 Ga.