Explore the vast range of titles available.

In phase-change memory devices, a material is cycled between glassy and crystalline states. The highly temperature-dependent kinetics of its crystallization process enables application in memory technology, but the transition has not been resolved on an atomic scale. Using femtosecond x-ray diffraction and ab initio computer simulations, we determined the time-dependent pair-correlation function of phase-change materials throughout the melt-quenching and crystallization process.We found a liquid–liquid phase transition in the phase-change materials Ag₄In₃Sb67Te26 and Ge15Sb85 at 660 and 610 kelvin, respectively. The transition is predominantly caused by the onset of Peierls distortions, the amplitude of which correlates with an increase of the apparent activation energy of diffusivity. This reveals a relationship between atomic structure and kinetics, enabling a systematic optimization of the memory-switching kinetics.

Reaction pathways of biochemical processes are influenced by the dissipative electrostatic interaction of the reagents with solvent water molecules. The simulation of these interactions requires a parametrization of the permanent and induced dipole moments. However, the underlying molecular polarizability of water and its dependence on ions are partially unknown. Here, we apply intense terahertz pulses to liquid water, whose oscillations match the timescale of orientational relaxation. Using a combination of terahertz pump / optical probe experiments, molecular dynamics simulations, and a Langevin dynamics model, we demonstrate a transient orientation of their dipole moments, not possible by optical excitation. The resulting birefringence reveals that the polarizability of water is lower along its dipole moment than the average value perpendicular to it. This anisotropy, also observed in heavy water and alcohols, increases with the concentration of sodium iodide dissolved in water. Our results enable a more accurate parametrization and a benchmarking of existing and future water models. The intermolecular dynamics of liquid water impact most biological processes. Here, the authors use intense terahertz electromagnetic pulses to generate a transient, out-of-equilibrium state of the water network to show that the molecules become oriented and probe the polarizability of this anisotropic state.

X-ray free-electron laser sources enable time-resolved X-ray studies with unmatched temporal resolution. To fully exploit ultrashort X-ray pulses, timing tools are essential. However, new high repetition rate X-ray facilities present challenges for currently used timing tool schemes. Here we address this issue by demonstrating a sensitive timing tool scheme to enhance experimental time resolution in pump-probe experiments at very high pulse repetition rates. Our method employs a self-referenced detection scheme using a time-sheared chirped optical pulse traversing an X-ray stimulated diamond plate. By formulating an effective medium theory, we confirm subtle refractive index changes, induced by sub-milli-Joule intense X-ray pulses, that are measured in our experiment. The system utilizes a Common-Path-Interferometer to detect X-ray-induced phase shifts of the optical probe pulse transmitted through the diamond sample. Owing to the thermal stability of diamond, our approach is well-suited for MHz pulse repetition rates in superconducting linear accelerator-based free-electron lasers. In time-resolved measurements it is crucial to know the time delay between the exciting and probing light pulses. Here the authors demonstrate a self-referencing common-path interferometer method measuring the arrival time between the X-ray free electron laser and the optical pulse to the target and thus their inherent timing jitter.

In haemoglobin the change from the low-spin (LS) hexacoordinated haem to the high spin (HS, S = 2) pentacoordinated domed deoxy-myoglobin (deoxyMb) form upon ligand detachment from the haem and the reverse process upon ligand binding are what ultimately drives the respiratory function. Here we probe them in the case of Myoglobin-NO (MbNO) using element- and spin-sensitive femtosecond Fe K α and K β X-ray emission spectroscopy at an X-ray free-electron laser (FEL). We find that the change from the LS (S = 1/2) MbNO to the HS haem occurs in ~800 fs, and that it proceeds via an intermediate (S = 1) spin state. We also show that upon NO recombination, the return to the planar MbNO ground state is an electronic relaxation from HS to LS taking place in ~30 ps. Thus, the entire ligand dissociation-recombination cycle in MbNO is a spin cross-over followed by a reverse spin cross-over process. The change from low-spin hexacoordinated to high-spin pentacoordinated domed form in heam upon ligand detachment and the reverse process underlie the respiratory function. The authors, using femtosecond time-resolved X-ray emission spectroscopy, capture the transient states connecting the two forms in myoglobin-NO upon NO photoinduced detachment.

A comprehensive insight into ultrafast dynamics of photo-switchable materials is desired for efficient control of material properties through light excitation. Here, we study a polycrystalline spin crossover thin film as a prototypical example and reveal the sequential photo-switching dynamics, from local molecular rearrangement to global lattice deformation. On the earliest femtosecond timescale, the local molecular structural rearrangement occurs within a constant unit-cell volume through a two-step process, involving initial Fe−ligand bond elongation followed by ligand rotation. The highly-oriented structure of the nanocrystalline films and the experimental geometry enables resolving the full anisotropic lattice structural dynamics in and out of the sample plane separately. While both molecular switching and lattice heating influence lattice volume, they exert varying degrees of impact at disparate time scales following photoexcitation. This study highlights the opportunities provided by Mega-electron-volt electron and X-ray free electron laser to advance the understanding of ultrafast dynamics of photo-switchable materials. The spin crossover films provide an efficient control of material properties by light excitation. In this work, the authors reveal sequential photo-switching dynamics, from local molecular rearrangement to global lattice deformation.

Time-resolved X-ray methods are widely used for monitoring transient intermediates over the course of photochemical reactions. Ultrafast X-ray absorption and emission spectroscopies as well as elastic X-ray scattering deliver detailed electronic and structural information on chemical dynamics in the solution phase. In this work, we describe the opportunities at the Femtosecond X-ray Experiments (FXE) instrument of European XFEL. Guided by the idea of combining spectroscopic and scattering techniques in one experiment, the FXE instrument has completed the initial commissioning phase for most of its components and performed first successful experiments within the baseline capabilities. This is demonstrated by its currently 115 fs (FWHM) temporal resolution to acquire ultrafast X-ray emission spectra by simultaneously recording iron Kα and Kβ lines, next to wide angle X-ray scattering patterns on a photoexcited aqueous solution of [Fe(bpy)3]2+, a transition metal model compound.

With the start of the user program at the European XFEL in 2017, and more recently with the LCLS‐II upgrade, the X‐ray repetition rate at X‐ray free‐electron lasers (XFELs) has been pushed into the kilo‐ and megahertz regimes. These high X‐ray repetition rates provide an increase in the integrated flux at these facilities by orders of magnitude, potentially facilitating measurements that were previously infeasible due to signal‐to‐noise constraints. However, the high repetition rates lead to new challenges for sample delivery and a shorter time for the sample to recover between X‐ray pulses. For solution‐phase techniques, the X‐ray–sample interactions will strongly perturb or even vaporize the sample jet. Although the sample can be replenished, up to X‐ray repetition rates of ∼100 kHz, by flowing the jet at high speeds, this does not completely mitigate the jet perturbations. In this work, we present a characterization of the jet perturbations induced by the high X‐ray repetition rates at the European XFEL. We show how these can introduce background signals in time‐resolved X‐ray solution scattering data measured at the Femtosecond X‐ray Experiments (FXE) instrument. We show that it is possible to mitigate these experimental artifacts by employing an alternating excitation scheme combined with careful background subtraction and that implementing this approach in the experimental design outperforms more simple background subtraction schemes. The methodology, the observations and analysis results are discussed in relation to the evolving landscape of XFEL sources. An analysis of experimental artifacts in time‐resolved X‐ray solution scattering data acquired at high repetition rate XFEL sources, specifically at the FXE instrument at the European XFEL, is presented.

Single‐ion magnets (SIMs) constitute the ultimate size limit in the quest for miniaturizing magnetic materials. Several bottlenecks currently hindering breakthroughs in quantum information and communication technologies could be alleviated by new generations of SIMs displaying multifunctionality. Here, ultrafast optical absorption spectroscopy and X‐ray emission spectroscopy are employed to track the photoinduced spin‐state switching of the prototypical complex [Co(terpy) 2 ] 2+ (terpy = 2,2′:6′,2″‐terpyridine) in solution phase. The combined measurements and their analysis supported by density functional theory (DFT), time‐dependent‐DFT (TD‐DFT) and multireference quantum chemistry calculations reveal that the complex undergoes a spin‐state transition from a tetragonally elongated doublet state to a tetragonally compressed quartet state on the femtosecond timescale, i.e., it sustains ultrafast Jahn‐Teller (JT) photoswitching between two different spin multiplicities. Adding new Co‐based complexes as possible contenders in the search for JT photoswitching SIMs will greatly widen the possibilities for implementing magnetic multifunctionality and eventually controlling ultrafast magnetization with optical photons.

Effective photoinduced charge transfer makes molecular bimetallic assemblies attractive for applications as active light‐induced proton reduction systems. Developing competitive base metal dyads is mandatory for a more sustainable future. However, the electron transfer mechanisms from the photosensitizer to the proton reduction catalyst in base metal dyads remain so far unexplored. A Fe─Co dyad that exhibits photocatalytic H2 production activity is studied using femtosecond X‐ray emission spectroscopy, complemented by ultrafast optical spectroscopy and theoretical time‐dependent DFT calculations, to understand the electronic and structural dynamics after photoexcitation and during the subsequent charge transfer process from the FeII photosensitizer to the cobaloxime catalyst. This novel approach enables the simultaneous measurement of the transient X‐ray emission at the iron and cobalt K‐edges in a two‐color experiment. With this methodology, the excited state dynamics are correlated to the electron transfer processes, and evidence of the Fe→Co electron transfer as an initial step of proton reduction activity is unraveled. A prototypic photosensitizer‐catalyst system produces hydrogen more efficiently than the constituting catalyst. Upon visible light absorption, a complex electronic cascade that facilitates the reaction is activated and tracked by X‐ray emission spectroscopy. The charge transfer from the Fe center to the Co catalyst allows to maintain increased electron density required for the reaction on the Co catalyst to happen. The electronic cascade includes nuclear oscillations due to the excited states intersection.