Explore the vast range of titles available.

Rational design of the catalysts is impressive for sustainable energy conversion. However, there is a grand challenge to engineer active sites at the interface. Herein, hierarchical transition bimetal oxides/sulfides heterostructure arrays interacting two-dimensional MoO x /MoS 2 nanosheets attached to one-dimensional NiO x /Ni 3 S 2 nanorods were fabricated by oxidation/hydrogenation-induced surface reconfiguration strategy. The NiMoO x /NiMoS heterostructure array exhibits the overpotentials of 38 mV for hydrogen evolution and 186 mV for oxygen evolution at 10 mA cm −2 , even surviving at a large current density of 500 mA cm −2 with long-term stability. Due to optimized adsorption energies and accelerated water splitting kinetics by theory calculations, the assembled two-electrode cell delivers the industrially relevant current densities of 500 and 1000 mA cm −2 at record low cell voltages of 1.60 and 1.66 V with excellent durability. This research provides a promising avenue to enhance the electrocatalytic performance of the catalysts by engineering interfacial active sites toward large-scale water splitting. While water splitting is an appealing carbon-neutral strategy for renewable energy generation, there is a need to develop new active, cost-effective catalysts. Here, authors prepare a nickel-molybdenum oxide/sulfide heterojunctions as bifunctional H 2 and O 2 evolution electrocatalysts.

Rational design efficient transition metal-based electrocatalysts for oxygen evolution reaction (OER) is critical for water splitting. However, industrial water-alkali electrolysis requires large current densities at low overpotentials, always limited by intrinsic activity. Herein, we report hierarchical bimetal nitride/hydroxide (NiMoN/NiFe LDH) array as model catalyst, regulating the electronic states and tracking the relationship of structure-activity. As-activated NiMoN/NiFe LDH exhibits the industrially required current density of 1000 mA cm −2 at overpotential of 266 mV with 250 h stability for OER. Especially, in-situ electrochemical spectroscopic reveals that heterointerface facilitates dynamic structure evolution to optimize electronic structure. Operando electrochemical impedance spectroscopy implies accelerated OER kinetics and intermediate evolution due to fast charge transport. The OER mechanism is revealed by the combination of theoretical and experimental studies, indicating as-activated NiMoN/NiFe LDH follows lattice oxygen oxidation mechanism with accelerated kinetics. This work paves an avenue to develop efficient catalysts for industrial water electrolysis via tuning electronic states. Rational design of efficient electrocatalysts for oxygen evolution reaction is critical for water-alkali electrolysis. Here, the authors fabricate a NiMoN/NiFe layered double hydroxide and show the accelerated oxygen evolution kinetics are due to the heterointerface.

Rational design of single atom catalyst is critical for efficient sustainable energy conversion. However, the atomic-level control of active sites is essential for electrocatalytic materials in alkaline electrolyte. Moreover, well-defined surface structures lead to in-depth understanding of catalytic mechanisms. Herein, we report a single-atomic-site ruthenium stabilized on defective nickel-iron layered double hydroxide nanosheets (Ru 1 /D-NiFe LDH). Under precise regulation of local coordination environments of catalytically active sites and the existence of the defects, Ru 1 /D-NiFe LDH delivers an ultralow overpotential of 18 mV at 10 mA cm −2 for hydrogen evolution reaction, surpassing the commercial Pt/C catalyst. Density functional theory calculations reveal that Ru 1 /D-NiFe LDH optimizes the adsorption energies of intermediates for hydrogen evolution reaction and promotes the O–O coupling at a Ru–O active site for oxygen evolution reaction. The Ru 1 /D-NiFe LDH as an ideal model reveals superior water splitting performance with potential for the development of promising water-alkali electrocatalysts. Rational design of single atom catalyst is critical for efficient sustainable energy conversion. Single-atomic-site ruthenium stabilized on defective nickel-iron layered double hydroxide nanosheets achieve superior HER and OER performance in alkaline media.

Regulating the spintronic structure of electrocatalysts can improve the oxygen evolution reaction performance efficiently. Nonetheless, the effects of tuning the spintronic structure for the oxygen evolution reaction mechanisms have rarely been discussed. Here, we show a ruthenium-cobalt-tin oxide with optimized spintronic structure due to the quantum spin interaction of Ru and Co. The specific spintronic structure of ruthenium-cobalt-tin oxide promotes the charge transfer kinetics and intermediates evolution behavior under applied potential, generating long-lived active species with higher spin density sites for the oxygen evolution reaction after the reconstruction process. Moreover, the ruthenium-cobalt-tin oxide possesses decoupled proton-electron transfer procedure during the oxygen evolution reaction process, demonstrating that the electron transfer procedure of O-O bond formation between *O intermediate and lattice oxygen in Co-O-Ru is the rate-determining step of the oxygen evolution reaction process. This work provides rational perspectives on the correlation between spintronic structure and oxygen evolution reaction mechanism. Tuning the spintronic structure in oxygen evolution reactions is underexplored, despite its potential to enhance catalytic performance. Here, the authors report a ruthenium-cobalt-tin oxide with an optimized spintronic structure, highlighting its improved performance and reaction mechanisms.

Solar-driven water splitting is a promising alternative to industrial hydrogen production. This study reports an elaborate design and synthesis of the integration of cadmium sulfide (CdS) quantum dots and cuprous sulfide (Cu 2 S) nanosheets as three-dimensional (3D) hollow octahedral Cu 2 S/CdS p–n heterostructured architectures by a versatile template and one-pot sulfidation strategy. 3D hierarchical hollow nanostructures can strengthen multiple reflections of solar light and provide a large specific surface area and abundant reaction sites for photocatalytic water splitting. Owing to the construction of the p–n heterostructure as an ideal catalytic model with highly matched band alignment at Cu 2 S/CdS interfaces, the emerging internal electric field can facilitate the space separation and transfer of photoexcited charges between CdS and Cu 2 S and also enhance charge dynamics and prolong charge lifetimes. Notably, the unique hollow Cu 2 S/CdS architectures deliver a largely enhanced visible-light-driven hydrogen generation rate of 4.76 mmol/(g·h), which is nearly 8.5 and 476 times larger than that of pristine CdS and Cu 2 S catalysts, respectively. This work not only paves the way for the rational design and fabrication of hollow photocatalysts but also clarifies the crucial role of unique heterostructure in photocatalysis for solar energy conversion.

Solar-driven water splitting is a promising alternative to industrial hydrogen production. This study reports an elaborate design and synthesis of the integration of cadmium sulfide (CdS) quantum dots and cuprous sulfide (Cu 2 S) nanosheets as three-dimensional (3D) hollow octahedral Cu 2 S/CdS p–n heterostructured architectures by a versatile template and one-pot sulfidation strategy. 3D hierarchical hollow nanostructures can strengthen multiple reflections of solar light and provide a large specific surface area and abundant reaction sites for photocatalytic water splitting. Owing to the construction of the p–n heterostructure as an ideal catalytic model with highly matched band alignment at Cu 2 S/CdS interfaces, the emerging internal electric field can facilitate the space separation and transfer of photoexcited charges between CdS and Cu 2 S and also enhance charge dynamics and prolong charge lifetimes. Notably, the unique hollow Cu 2 S/CdS architectures deliver a largely enhanced visible-light-driven hydrogen generation rate of 4.76 mmol/(g·h), which is nearly 8.5 and 476 times larger than that of pristine CdS and Cu 2 S catalysts, respectively. This work not only paves the way for the rational design and fabrication of hollow photocatalysts but also clarifies the crucial role of unique heterostructure in photocatalysis for solar energy conversion.

Facing with grave climate change and enormous energy demand, catalyzer gets more and more important due to its significant effect on reducing fossil fuels consumption. Hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) by water splitting are feasible ways to produce clean sustainable energy. Here we systematically explored atomic structures and related STM images of Se defects in PtSe2. The equilibrium fractions of vacancies under variable conditions were detailly predicted. Besides, we found the vacancies are highly kinetic stable, without recovering or aggregation. The Se vacancies in PtSe2 can dramatically enhance the HER performance, comparing with, even better than Pt(111). Beyond, we firstly revealed that PtSe2 monolayer with Se vacancies is also a good OER catalyst. The excellent bipolar catalysis of Se vacancies were further confirmed by experimental measurements. We produced defective PtSe2 by direct selenization of Pt foil at 773 K using a CVD process. Then we observed the HER and OER performance of defective PtSe2 is much highly efficient than Pt foils by a series of measurements. Our work with compelling theoretical and experimental studies indicates PtSe2 with Se defects is an ideal bipolar candidate for HER and OER.