Explore the vast range of titles available.

Parrotia subaequalis (H. T. Chang) R.M. Hao & H.T. Wei is a rare and endangered Tertiary relict tree that is endemic to subtropical China. However, little is known about its growth condition and relationship with associated tree species. Here, for the first time we measured the structural diversity of P. subaequalis communities at three representative sites in eastern China using four structural indices, including mingling, tree-tree distance, and diameter and tree height differences. The results showed that: 1) Collectively, most P. subaequalis and associated tree species were small and mid-sized classes in tree height, and small-sized class in diameter; 2) There were two or more other tree species around most of P. subaequalis individuals across the three sites; 3) Overall, the mean distance between reference trees and their neighbors was mainly 1–2 m. Our results indicated that a strong interspecific competition existed between P. subaequalis and its associated tree species. Meanwhile, although the reference tree P. subaequalis had slight advantages in both horizontal and vertical planes, we think that it is necessary to take some effective measures to reduce the interspecific competition and thereby keep it at a proper successive stage. In addition, we also discuss the protection level of P. subaequalis in China, and propose to keep this species at the First-Grade State Protection.

Large old ginkgos (LOGs), having important ecological, cultural and historical values, are widely distributed in China. However, little is known regarding their quantity and tree-habitat quality in the mesoscale distribution. Here, the quantity, spatial distribution and conservation status of Ginkgo biloba L. older than 100 years in Jiangsu Province, east China were examined using ArcGIS software and detrended correspondence analysis (DCA). Based on our collated data, Jiangsu Province included 2,123 LOG individuals and 237 LOG groves and both mostly occurred in southern and central Jiangsu. Most LOGs grew well and were distributed in villages, temples and government institutions. Ginkgos’ growth status was largely associated with tree-habitat types. LOGs performed worse in commercial areas, roadsides and residential districts than in other tree-habitat types. To protect these ginkgos, dynamic monitoring and strengthening of scientific management are required, especially for tree-habitats in the process of urban planning and construction. It is also necessary to improve the relationship between religious culture and conservation measures. This is the first study examining LOGs in Jiangsu Province using a unified standard and our findings provide a baseline for future studies and insights into the regional conservation of LOGs.

Heptacodium miconioides Rehd. is an endangered species endemic to China and has suffered rapid decrease of distribution range and population size. This species has been disappeared in central China where the modal specimen was collected. We analyzed the genetic variation of the remaining populations to reveal whether the genetic diversity also suffered decrease and to provide some suggestions for conservation. All the nine known remaining populations were sampled. Genetic variation was analyzed based on RAPD markers and two fragments of cpDNA sequence, intergenic spacers of petG-trnP and trnS-trnG. No variation was observed in the two fragments of cpDNA sequence. However, the species exhibited high level of RAPD variation compared to other threatened or rare plants. Measures of genetic diversity within populations were strongly related to the log of estimated population size, indicating that large populations usually have more genetic diversity than that of small ones. About 25% of the variation was partitioned among populations. Significant relationship was observed between differentiation and geographical distance, indicating a pattern of isolation-by-distance. Given for few populations remaining, all the populations should be protected and urgent efforts be paid on the small populations to avoid their local extinction.

We study the weighted composition operators Wh,on Hardy space H2（B） whenever h ∈ BMOA（resp.h ∈ VMOA）.Analogous results are given for Hp（B） spaces and the scale of weighted Bergman spaces.In the latter case,BMOA is replaced by the Bloch space（resp.VMOA by the little Bloch space）.

The microstructure, mechanical properties and wear resistance of high chromium cast steel containing boron after different heat treatments were studied by means of the optical microscopy （OM）, the scanning electron microscopy （SEM）, X-ray diffraction （XRD）, hardness, impact toughness, tensile and pin-on-disc abrasion tests. The results show that as cast microstructures of boron-free high chromium steel consist of martensite and a few （Cr, Fe）_7C_3 carbide, and the macro-hardness of boron-free high chromium steel is 55-57 HRC. After 0.5 mass% B was added into high chromium cast steel, as-cast structure transforms into eutectic （Fe, Cr）2B, （Cr, Fe）7 （C, B）a and martensite, and the macro-hardness reaches 58-60 HRC. High temperature quenching leads to the disconnection and isolated distribution of boride, and there are many （Cr,Fe）_23 （C,B）_6 precipitated phases in the quenching structure. Quenching from 1050 ℃, high chromium steel obtained the highest hardness, and the hardness of high chromium cast steel containing boron is higher than that of boron-free high chromium steel. The change of quenching temperature has no obvious effect on impact toughness of high chromium steel, and the increase of quenching temperature leads to tensile strength having an increasing tendency. At the same quenching temperature, the wear resistance of high chromium cast steel containing boron is more excellent than that of boron-free high chromium steel. High chromium cast steel guide containing boron has good performance while using in steel bar mill.

A new liquid chromatographic method has been developed for the chiral separation of the enantiomers of mandelic acid and their derivatives 2-chioromandelic acid, 4-hydroxymandelic acid, 4-methoxymandelic acid, and 3,4,5-trismethoxymandelic acid. The enantiomers were separated by a CHIRALPAK IC （250 mmx4.6 mm, 5 pm）. Mandelic acid, 4-methoxymandelic acid, and 3,4,5-trismethoxymandelic acid were baseline resolved （resolution factor （Rs）=2.21, Rs=2.14, and Rs=3.70, respectively）. In contrast, the enantioselectivities between CHIRALPAK IC and 2-chloromandelic acid and 4-hydroxymandelic acid investigated were low. By comparing the chromatographs of mandelic acid enantiomers and mandelic acid spiked with （R）-mandelic acid, it was determined that the first effluent was （R）-mandelic acid.

As an active microwave remote sensing imaging sensor, Synthetic Aperture Radar（SAR） plays an important role in earth observation. Here we establish a SAR system based on the platform of the moon. This will aid large-scale, constant, and long-term dynamic Earth observations to better meet the needs of global change research and to complement the space borne and airborne earth observations. Lunar-based SAR systems have the characteristics of high resolution and wide swath width. The swath width could be thousands of kilometers in the stripe mode and it could cover 40% of earth＇s surface with 10 meters or even higher spatial resolution in the scanning mode. Using the simplified observation model, here we quantitatively analyze the spatial resolution and coverage area of lunar-based SAR and simulate the observation on the Qinghai-Tibet plateau and the Amazon plain. The results show that this system could provide near 100% daily coverage of the Qinghai-Tibet plateau, whereas 40% to 70% daily coverage of the Amazon plain. Lunar-based SAR could provide large-scale, long-term and stable time series data in order to support future research of global change.

Using coupling model, the time-effect behavior for deep pit during excavating and dewatering is studied. The distribution of the seepage field, the horizontal displacement of wall, the settlement of surrounding soil and the settlement of the road are all obtained from the coupling analysis. Taking the deep foundation pit engineering of one station as engineering background, the coupling of seepage and consolidation is simulated in the process of excavating. According to the comparative analysis between the simulation value and the measured results, it can be known that the calculation value considering the coupling of seepage and consolidation is well in accordance with the measured value. The analysis shows that the provide method can be used to simulate the deep foundation under the coupling effect and it is reasonable, feasible, and can provide some kind of references to design and construction.

The dynamic recrystallization and static recrystallization in a low carbon steel were investigated through single-pass and double-pass experiments. The results indicate that as the deformation temperature increases and the strain rate decreases, the shape of the stress-strain curve is changed from dynamic recovery shape to dynamic recrystallization shape. The austenite could not recrystallize within a few seconds after deformation at temperature below 900 ℃. According to the change in microstructure during deformation, the controlled rolling of low carbon steel can be divided into four stages： dynamic recrystallization, dynamic recovery, strain-induced ferrite transformation, and rolling in two-phase region. According to the microstructure after deformation, the controlled rolling of low carbon steel can be divided into five regions： non-recrystallized austenite, partly-recrystallized austenite, fully-recrystallized austenite, austenite to ferrite transformation, and dual phase.

The oxidation morphologies of modified 310 steel exposed in 900 and 1 100 ℃ air were investigated. A double layer morphology consisting of a （Cr, Mn）-rich outer layer and a fine Cr-rich inner layer was formed at 900℃. It was related to the breakaway oxidation induced by the Cr-depletion and the Mn-segregation in inner layer. Some Cr-rich oxides with amorphous state were formed along grain boundaries. And some new finer oxide grains, voids and Cr-rich precipitates were observed in spallation areas at 1 100℃. Correspondingly, the oxidation kinetic curve dropped with the spallation of scale and increased with the formation of some new oxide grains. It was caused by segregation of Cr and the transformation of oxides from Cr2O3 to the volatile oxides at elevated temperature. XRD analysis showed that the precipitates were mainly composed of CrO3. Segregation and depletion for solutions were also discussed by oxidation diffusion mechanisms.