Explore the vast range of titles available.

Fuel-driven self-assembly of actin filaments and microtubules is a key component of cellular organization. Continuous energy supply maintains these transient biomolecular assemblies far from thermodynamic equilibrium, unlike typical synthetic systems that spontaneously assemble at thermodynamic equilibrium. Here, we report the transient self-assembly of synthetic molecules into active materials, driven by the consumption of a chemical fuel. In these materials, reaction rates and fuel levels, instead of equilibrium composition, determine properties such as lifetime, stiffness, and self-regeneration capability. Fibers exhibit strongly nonlinear behavior including stochastic collapse and simultaneous growth and shrinkage, reminiscent of microtubule dynamics.

Low-molecular-weight gels show great potential for application in fields ranging from the petrochemical industry to healthcare and tissue engineering. These supramolecular gels are often metastable materials, which implies that their properties are, at least partially, kinetically controlled. Here we show how the mechanical properties and structure of these materials can be controlled directly by catalytic action. We show how in situ catalysis of the formation of gelator molecules can be used to accelerate the formation of supramolecular hydrogels, which drastically enhances their resulting mechanical properties. Using acid or nucleophilic aniline catalysis, it is possible to make supramolecular hydrogels with tunable gel-strength in a matter of minutes, under ambient conditions, starting from simple soluble building blocks. By changing the rate of formation of the gelator molecules using a catalyst, the overall rate of gelation and the resulting gel morphology are affected, which provides access to metastable gel states with improved mechanical strength and appearance despite an identical gelator composition. In situ catalysis of the formation of gelator molecules provides access to metastable gel states with improved mechanical strength compared with uncatalysed gels that have an identical composition. Acid or aniline catalysis enables the formation of hydrogels with tunable gel-strength in a matter of minutes under ambient conditions from simple building blocks.

Self-assembly provides access to a variety of molecular materials, yet spatial control over structure formation remains difficult to achieve. Here we show how reaction–diffusion (RD) can be coupled to a molecular self-assembly process to generate macroscopic free-standing objects with control over shape, size, and functionality. In RD, two or more reactants diffuse from different positions to give rise to spatially defined structures on reaction. We demonstrate that RD can be used to locally control formation and self-assembly of hydrazone molecular gelators from their non-assembling precursors, leading to soft, free-standing hydrogel objects with sizes ranging from several hundred micrometres up to centimeters. Different chemical functionalities and gradients can easily be integrated in the hydrogel objects by using different reactants. Our methodology, together with the vast range of organic reactions and self-assembling building blocks, provides a general approach towards the programmed fabrication of soft microscale objects with controlled functionality and shape. Reaction-diffusion controls the spatial formation of many natural structures but is rarely applied to organic materials. Here, the authors couple reaction-diffusion to the self-assembly of a supramolecular gelator, introducing a strategy to forming soft, free-standing objects with controlled shape and functionality.

We report a flexible single-cell isolation method by imaging-assisted hydrogel formation. Our approach consists of imaging-aided selective capture of cells of interest by encasing them into a polymeric hydrogel, followed by removal of unwanted cells and subsequent release of isolated cells by enzymatic hydrogel degradation, thus offering an opportunity for further analysis or cultivation of selected cells. We achieved high sorting efficiency and observed excellent viability rates (>98%) for NIH/3T3 fibroblasts and A549 carcinoma cells isolated using this procedure. The method presented here offers a mask-free, cost-efficient and easy-to-use alternative to many currently existing surface-based cell-sorting techniques, and has the potential to impact the field of cell culturing and isolation, e.g. single cell genomics and proteomics, investigation of cellular heterogeneity and isolation of best performing mutants for developing new cell lines.

Supramolecular gels, which demonstrate tunable functionalities, have attracted much interest in a range of areas, including healthcare, environmental protection and energy-related technologies. Preparing these materials in a reliable manner is challenging, with an increased level of kinetic defects observed at higher self-assembly rates. Here, by combining biocatalysis and molecular self-assembly, we have shown the ability to more quickly access higher-ordered structures. By simply increasing enzyme concentration, supramolecular order expressed at molecular, nano- and micro-levels is dramatically enhanced, and, importantly, the gelator concentrations remain identical. Amphiphile molecules were prepared by attaching an aromatic moiety to a dipeptide backbone capped with a methyl ester. Their self-assembly was induced by an enzyme that hydrolysed the ester. Different enzyme concentrations altered the catalytic activity and size of the enzyme clusters, affecting their mobility. This allowed structurally diverse materials that represent local minima in the free energy landscape to be accessed based on a single gelator structure. Supramolecular gels show promise in diverse areas, including healthcare and energy technologies, owing to tunable properties that arise directly from the organization of their building blocks. Researchers have now been able to control this behaviour by combining enzymatic catalysis with molecular self-assembly. Although it seems counter-intuitive, gels that assembled faster showed fewer defects.

We have developed an analytical method to quantitatively analyze differential scanning calorimetry (DSC) experimental data. This method provides accurate determination of thermal properties such as equilibrium melting temperature, latent heat, change of heat capacity which can be performed automatically without intervention of a DSC operator. DSC is one of the best techniques to determine the thermal properties of materials. However, the accuracy of the transition temperature and enthalpy change can be affected by artifacts caused by the instrumentation, sampling, and the DSC analysis methods which are based on graphical constructions. In the present study, an analytical function (DSC N (T)) has been developed based on an assumed Arrhenius crystal size distribution together with instrumental and sample-related peak broadening. The DSC N (T) function was successfully applied to fit the experimental data of a substantial number of calibration and new unknown samples, including samples with an obvious asymmetry of the melting peak, yielding the thermal characteristics such as melting and glass transition temperature, and enthalpy and heat capacity change. It also allows very accurate analysis of binary systems with two distinct but severely overlapping peaks and samples that include a cold crystallization before melting.

This protocol details the preparation of low-molecular-weight hydrogels (LMWGs) in which the gelation time and mechanical stiffness of the final gel can be tuned with the concentration of the catalyst used in the in situ formation of the hydrogelator. By altering the rate of formation of the hydrazone-based gelator from two water-soluble compounds—an oligoethylene functionalized benzaldehyde and a cyclohexane-derived trishydrazide—in the presence of acid or aniline as catalyst, the kinetics of gelation can be tuned from hours to minutes. The resulting materials display controllable stiffness in the 5–50 kPa range. This protocol works at ambient temperatures in water, at either neutral or moderately acidic pH (phosphate buffer, pH 5) depending on the catalyst used. The hydrazide and aldehyde precursors take a total of 5 d to prepare. The final gel is prepared by mixing aqueous solutions of the two precursors and can take between minutes and hours to set, depending on the catalytic conditions. We also describe analysis of the hydrogels by critical gel concentration (CGC) tests, rheology and confocal laser-scanning microscopy (CLSM).

Here, transient supramolecular hydrogels that are formed through simple aging‐induced seeded self‐assembly of molecular gelators are reported. In the involved molecular self‐assembly system, multicomponent gelators are formed from a mixture of precursor molecules and, typically, can spontaneously self‐assemble into thermodynamically more stable hydrogels through a multilevel self‐sorting process. In the present work, it is surprisingly found that one of the precursor molecules is capable of self‐assembling into nano‐sized aggregates upon a gentle aging treatment. Importantly, these tiny aggregates can serve as seeds to force the self‐assembly of gelators along a kinetically controlled pathway, leading to transient hydrogels that eventually spontaneously convert into thermodynamically more stable hydrogels over time. Such an aging‐induced seeded self‐assembly process is not only a new route toward synthetic out‐of‐equilibrium supramolecular systems, but also suggests the necessity of reporting the age of self‐assembling building block solutions in other self‐assembly systems. A simple aging‐induced seeded self‐assembly resulting in transient supramolecular hydrogels is reported. The obtained transient hydrogels can convert into the thermodynamically more stable state over time. The findings demonstrate a new route toward out‐of‐equilibrium self‐assembly system, and suggest the necessity of stating the ages of self‐assembling building blocks in some other supramolecular systems.

Cells can react to their environment by changing the activity of enzymes in response to specific chemical signals. Artificial catalysts capable of being activated by chemical signals are rare, but of interest for creating autonomously responsive materials. We present an organocatalyst that is activated by a chemical signal, enabling temporal control over reaction rates and the formation of materials. Using self-immolative chemistry, we design a deactivated aniline organocatalyst that is activated by the chemical signal hydrogen peroxide and catalyses hydrazone formation. Upon activation of the catalyst, the rate of hydrazone formation increases 10-fold almost instantly. The responsive organocatalyst enables temporal control over the formation of gels featuring hydrazone bonds. The generic design should enable the use of a large range of triggers and organocatalysts, and appears a promising method for the introduction of signal response in materials, constituting a first step towards achieving communication between artificial chemical systems. Enzymes regulated by chemical signals are common in biology, but few such artificial catalysts exist. Here, the authors design an aniline catalyst that, when activated by a chemical trigger, catalyses formation of hydrazone-based gels, demonstrating signal response in a soft material.

The adhesiveness of biological micropatterned adhesives primarily relies on their geometry (e.g., feature size, architecture) and material properties (e.g., stiffness). Over the last few decades, researchers have been mimicking the geometry and material properties of biological micropatterned adhesives. The performance of these biomimetic micropatterned adhesives is usually tested on hard substrates. Much less is known about the effect of geometry, feature size, and material properties on the performance of micropatterned adhesives when the substrate is deformable. Here, micropatterned adhesives of two stiffness degrees (Young’s moduli of 280 and 580 kPa) were fabricated from poly(dimethylsiloxane) (PDMS) and tested on soft poly(vinyl alcohol) (PVA) substrates of two stiffness degrees (12 and 18 kPa), and on hard glass substrates as a reference. An out-of-the-cleanroom colloidal lithographic approach was successfully expanded to fabricate adhesives with two geometries, namely dimples with and without a terminal layer. Dimples without a terminal layer were fabricated on two length scales, namely with sub-microscale and microscale dimple diameters. The cross section of samples with a terminal layer showed voids with a spherical shape, separated by hourglass-shaped walls. These voids penetrate the terminal layer, resulting in an array of holes at the surface. We found that on soft substrates, generally, the size of the dimples did not affect pull-off forces. The positive effects of sub-microscale features on pull-off and friction forces, such as defect control and crack trapping, as reported in the literature for hard substrates, seem to disappear on soft substrates. The dimple geometry with a terminal layer generated significantly higher pull-off forces compared to other geometries, presumably due to interlocking of the soft substrate into the holes of the terminal layer. Pull-off from soft substrates increased with the substrate stiffness for all tested geometries. Friction forces on soft substrates were the highest for microscale dimples without a terminal layer, likely due to interlocking of the soft substrate between the dimples.