Explore the vast range of titles available.

A simulation method was developed for modelling SAXS data recorded on cellulose rich pulps. The modelling method is independent of the establishment of separate form factors and structure factors and was used to model SAXS data recorded on dense samples. An advantage of the modelling method is that it made it possible to connect experimental SAXS data to apparent average sizes of particles and cavities at different sample solid contents. Experimental SAXS data could be modelled as a superposition of a limited number of simulated intensity components and gave results in qualitative agreement with CP/MAS 13 C-NMR data recorded on the same samples. For the water swollen samples, results obtained by the SAXS modelling method and results obtained from CP/MAS 13 C-NMR measurements, agreed on the ranking of particle sizes in the different samples. The SAXS modelling method is dependent on simulations of autocorrelation functions and the time needed for simulations could be reduced by rescaling of simulated correlation functions due to their independence of the choice of step size in real space. In this way an autocorrelation function simulated for a specific sample could be used to generate SAXS intensity profiles corresponding to all length scales for that sample and used for efficient modelling of the experimental data recorded on that sample. Graphical abstract

Several spectroscopic techniques have been optimized to check extra-virgin olive oil quality and authenticity, as well as to detect eventual adulterations. These methods are usually complementary and can give information about different olive oil chemical components with bioactive and antioxidant properties. In the present work, a well-characterized set of extra-virgin olive oil (cultivar Frantoio) samples from a specific area of Tuscany (Italy) were investigated by combining near UV-Vis absorption spectroscopy, 1H and 13C nuclear magnetic resonance (NMR) to identify and quantify different chemical components, such as pigments, secoiridoids and squalene, related to the nutritional and quality properties of olive oils. Moreover, the pigmentation index of olives, organoleptic and sensory properties, total phenolic compound contents and the lipidic fractions of olive oils were investigated. The results obtained are, finally, compared and discussed in order to correlate several properties of both olives and olive oils with specific features of the cultivation area.

The aim of this study was preparation of new derivatives based on 2-((4-chlorophenoxy)methyl)-N-(arylcarbamothioyl)benzamide structure; the new compounds were characterized by IR, NMR (1H, 13C) spectroscopy, and elemental analysis. The obtained compounds were evaluated for their in vitro antimicrobial activity against planktonic and biofilm-embedded microbial cells (Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, Candida albicans), by qualitative and quantitative assays. Some of the compounds revealed promising antibacterial and antifungal activities, with low minimum inhibitory concentration values between 0.15 and 2.5 mg/mL and minimal biofilm eradication concentrations of 0.019–2.5 mg/mL. To investigate the potential target of their antibacterial activity, in silico drug-likeness and molecular docking screenings on Staphylococcus aureus DNA gyrase were performed. The compound with the best antibacterial activity (1g) was docked into topoisomerase II DNA gyrase enzymes (PDB ID: 2XCS) and showed valuable interactions with the target protein along with good docking scores, suggesting that it can act by the inhibition of DNA replication. The tested compounds exhibited only a poor antioxidant activity, as revealed by the in vitro assay using 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay.

13C NMR spectroscopic investigations were conducted for various amino acid derivatives and peptides. It was observed that 13C NMR chemical shifts of the carbonyl carbons are correlated with the solvent polarities, but the extent depends on the structures. The size of the functional groups and inter- and intra-molecular hydrogen bonding appear to be the major contributors for this tendency.

A new, robust method for measuring the average pore size of water-swollen, cellulose I rich fibres is presented. This method is based on the results of solid-state NMR, which measures the specific surface area (area/solids mass) of water-swollen samples, and of the fibre saturation point (FSP) method, which measures the pore volume (water mass/solids mass) of water-swollen samples. These results are suitable to combine since they are both recorded on water-swollen fibres in excess water, and neither requires the assumption of any particular pore geometry. The new method was used for three model samples and reasonable average pore size measurements were obtained for all of them. The structural characterization of water-swollen samples was compared with the dry structure of fibres as revealed using BET nitrogen gas adsorption after a liquid exchange procedure and careful drying. It was concluded that the structure of the water-swollen fibres sets an upper limit on what is obtainable in the dry state.

The ability of non-toxic and biodegradable deep eutectic solvent (DES) choline chloride + DL-malic acid in mole ratio 1:1, for the breaking of the azeotropes heptane + methanol and toluene + methanol by means of liquid? ?liquid extraction was evaluated. Ternary liquid?liquid equilibrium experiments were performed at 298.15 K and at atmospheric pressure. Densities, viscosities and refractive indices of DES + methanol and water + DES systems were experimentally determined over a wide temperature range and at atmospheric pressure. Additionally, the viscosities of DES + glycerol mixture were - determined at temperatures up to 363.15 K to check how much the addition of glycerol decreases high viscosities of DES. The results indicate that the addition of small amounts of water or glycerol as a third component significantly decreases the viscosity of the investigated deep eutectic solvent. Based on the selectivity and distribution ratio values, the extraction ability of the investigated deep eutectic solvent, in comparison with the conventionally used solvents, yields promising results. Non-random two-liquid (NRTL) and universal quasichemical (UNIQUAC) models were satisfactorily applied for correlation of experimental phase equilibrium data for two ternary mixtures.

The object of the study is lignite. Analytical testing techniques, such as elemental analysis, 13C nuclear magnetic resonance (13C NMR) spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM), were used to acquire information on the structural parameters of lignite. The aromaticity of Xianfeng lignite is 43.57%, and the aromatic carbon structure is mainly naphthalene and anthracene/phenanthrene. The aliphatic carbon structure is dominated by cycloalkanes, alkyl side chains, and hydrogenated aromatics. Oxygen is mainly present in ether oxygen, carboxyl, and carbonyl groups. Nitrogen is mainly in the form of pyrrole nitrogen and quaternary nitrogen. Sulfur is mainly thiophene sulfur. According to the analysis results, the molecular structure model of XF lignite was constructed. The molecular formula is C184H172O39N6S2. The 2D structure was converted to a 3D structure using computer simulation software and optimized. The optimized model has a remarkable stereoconfiguration, and the aromatic lamellae are irregularly arranged in space. The aromatic rings were mainly connected by methylene, hypomethylene, methoxy, and aliphatic rings. In addition, the simulated 13C NMR spectra are in good agreement with the experimental spectra. This shows the rationality of the 3D chemical structure model.

Recent findings demonstrate that concentrated sulfuric acid supports rich organic chemistry, including the stability of the canonical DNA bases adenine, thymine, guanine and cytosine. Yet, due to full protonation in concentrated sulfuric acid, these bases may not pair as effectively as they do in water. We are therefore motivated to study nucleic acid bases that pair via hydrophobic and van der Waals interactions instead of canonical hydrogen bonding. Here, we investigate the stability of 14 selected, commercially available alternative nucleobases in concentrated sulfuric acid to evaluate their potential for forming DNA-like polymers in this solvent. The reactivity of compounds 1–14 have not been previously investigated in concentrated sulfuric acid. We incubate the selected compounds in 98% and 81% w/w sulfuric acid and monitor their stability using 1H and 13C NMR spectroscopy over 3 weeks at room temperature. In 98% w/w sulfuric acid, six bases—benzo[c][1,2,5]thiadiazole (1), 2,2′-bipyridine (2), 1,1′-biphenyl (3), 1-methoxy-3-methylbenzene (MMO2) (7) and 1-chloro-3-methoxybenzene (ClMO) (13), and 2,4-difluorotoluene (14)—remain soluble and stable with no detectable degradation. A few compounds show non-destructive reactivity, like sulfonation (compound 3) or H/D exchange (compounds 7, 13, 14). The other compounds react rapidly or are insoluble in 98% w/w sulfuric acid. In 81% w/w sulfuric acid, only compounds 1 and 2 remain stable and soluble, while other selected compounds are insoluble or unstable. Our findings identify a subset of alternative bases stable in concentrated sulfuric acid, advancing efforts towards the design of an example genetic-like polymer in this unusual solvent. Our work further highlights sulfuric acid’s potential for supporting complex organic chemistry, with implications for astrobiology, planetary science of Venus and synthetic biology.

Life as we know it depends on peptide and nucleic acid polymers built from a limited set of backbone residues, yet planetary environments beyond Earth motivate consideration of alternative chemical frameworks for genetic- and protein-like polymers. In this context, we synthesize four azatide dipeptide analogs (Alaa-Glya (1), Glya-Alaa (2), Glya-Glya (3), and Alaa-Alaa (4)) as candidate backbone motifs for non-standard biologically relevant polymers. We then systematically assess their stability and reactivity in 98% w/w sulfuric acid, a solvent relevant to Venusian cloud chemistry. We assess the stability of the azatides via 1H and 13C NMR spectroscopy supported with ELSD-LCMS. We monitor the stability of the compounds over periods from hours to two weeks at room temperature and at elevated temperatures (50–80 °C). All four azatides readily dissolve in 98% w/w D2SO4 and are generally stable at room temperature. Glya-Alaa (2) shows no detectable degradation over a two-week incubation in 98% w/w sulfuric acid. The other three azatide analogs display only minor decomposition. ELSD-LCMS measurements qualitatively confirm the NMR results, revealing only minor-to-moderate loss of parent compounds after two weeks at room temperature. At higher temperatures, representative of the lower Venusian cloud deck, the stability of the azatides decreases dramatically. All four compounds undergo significant decomposition at 50 °C and completely degrade within one to two weeks at 80 °C. Our findings indicate that azatides, despite being generally stable in concentrated sulfuric acid at room temperature, lack the thermal stability that might be required to serve as viable backbone motifs for biological polymers in environments spanning the full temperature range of Venusian clouds.