Explore the vast range of titles available.

A triboelectric nanogenerator (TENG) is an emerging energy harvesting technology utilizing multi-directional, wasted mechanical energies stemming from vibrations, winds, waves, body movements, etc. In this study, we report a comb-structured TENG (CTENG) capable of effectively scavenging multi-directional motions from human movements, which include walking, jumping, and running. By attaching CTENG to a person's calf, we obtain a root-mean-square (RMS) power value of 5.28 μW (i.e. 13.12 V and 0.4 μA) for 1 s during mild running action (~5 m/s), which is sufficient for powering 10 light emitting diodes (LEDs). We integrate a CTENG with a simple hand-held pendulum (HHP) system with a natural frequency of 5.5 Hz. The natural frequency and input energy of our HHP system can be easily controlled by changing the holder mass and initial bending displacement, thus producing different output behaviors for the CTENG. Under the optimal HHP-based CTENG system design, the maximum output reaches 116 V at 6.5 μA under 0.1 kg mass and 4 cm bending displacement conditions. The corresponding output energy is 52.7 μJ for an operation time of 10.8 s. Our HHP-CTENG system can sufficiently power 45 LEDs and shows different output performances by varying the driving velocity of a vehicle, thus demonstrating the possibility for a self-powered velocity monitoring system.

Since 2012, a triboelectric nanogenerator (TENG) has provided new possibilities to convert tiny and effective mechanical energies into electrical energies by the physical contact of two objects. Over the past few years, with the advancement of materials' synthesis and device technologies, the TENGs generated a high instantaneous output power of several mW/cm 2 , required to drive various self-powered systems. However, TENGs may suffer from intrinsic and practical limitations such as air breakdown that affect the further increase of the outputs. This article provides a comprehensive review of high-output TENGs from fundamental issues through materials to devices. Finally, we show some strategies for fabricating high-output TENGs.

We compare approaches to measure oxygen surface exchange kinetics, by simultaneous optical transmission relaxation (OTR) and AC-impedance spectroscopy (AC-IS), on the same mixed conducting SrTi 0.65 Fe 0.35 O 3-x film. Surface exchange coefficients were evaluated as a function of oxygen activity in the film, controlled by gas partial pressure and/or DC bias applied across the ionically conducting yttria-stabilized zirconia substrate. Changes in measured light transmission through the film over time (relaxations) resulted from optical absorption changes in the film corresponding to changes in its oxygen and oxidized Fe (~Fe 4+ ) concentrations; such relaxation profiles were successfully described by the equation for surface exchange-limited kinetics appropriate for the film geometry. The k chem values obtained by OTR were significantly lower than the AC-IS derived k chem values and k q values multiplied by the thermodynamic factor (bulk or thin film), suggesting a possible enhancement in k by the metal current collectors (Pt, Au). Long-term degradation in k chem and k q values obtained by AC-IS was also attributed to deterioration of the porous Pt current collector, while no significant degradation was observed in the optically derived k chem values. The results suggest that, while the current collector might influence measurements by AC-IS, the OTR method offers a continuous, in situ, and contact-free method to measure oxygen exchange kinetics at the native surfaces of thin films.

A method to model the metastable phase formation in the Cu-W system based on the critical surface diffusion distance has been developed. The driver for the formation of a second phase is the critical diffusion distance which is dependent on the solubility of W in Cu and on the solubility of Cu in W. Based on comparative theoretical and experimental data, we can describe the relationship between the solubilities and the critical diffusion distances in order to model the metastable phase formation. Metastable phase formation diagrams for Cu-W and Cu-V thin films are predicted and validated by combinatorial magnetron sputtering experiments. The correlative experimental and theoretical research strategy adopted here enables us to efficiently describe the relationship between the solubilities and the critical diffusion distances in order to model the metastable phase formation during magnetron sputtering.

In this study, an environmentally friendly, cost-effective, and single-step procedure is used for the synthesis of polycrystalline Cu 2 O particles with controlled morphologies. Simple sugars are extracted from date fruit pulp (Phoenix dactylifera) and used as a reducing agent for the formation of Cu 2 O particles in aqueous medium. The feasibility of this solution is compared with the standard glucose solution. The Cu 2 O particles are characterized by electron microscopy, X-ray diffraction, optical absorption and Raman scattering techniques. It is concluded that the morphology of the particles is mainly influenced by the solvents. The obtained Cu 2 O particles are then used as an adsorbent to uptake As(III) ions from water. The maximum adsorption capacity (Q max ) is estimated by Langmuir and Freundlich isotherms and it is found that Q max  = 14.3 mg g -1 . Adsorption kinetics study showed that the adsorption equilibrium could be achieved in 1 h and that the purified water meets the standards of World Health Organization (WHO) for acceptable amount of As(III) in drinking water. Adsorption kinetic models showed that the adsorption is chemisorption in nature.