Explore the vast range of titles available.

Bone is a highly vascularized tissue with a unique and complex structure. Long bone consists of a peripheral cortical shell containing a network of channels for vascular penetration and an inner highly vascularized bone marrow space. Bioprinting is a powerful tool to enable rapid and precise spatial patterning of cells and biomaterials. Here we developed a two-step digital light processing technique to fabricate a bone-mimetic 3D hydrogel construct based on octacalcium phosphate (OCP), spheroids of human umbilical vein endothelial cells (HUVEC), and gelatin methacrylate (GelMA) hydrogels. The bone-mimetic 3D hydrogel construct was designed to consist of a peripheral OCP-containing GelMA ring to mimic the cortical shell, and a central GelMA ring containing HUVEC spheroids to mimic the bone marrow space. We further demonstrate that OCP, which is evenly embedded in the GelMA, stimulates the osteoblastic differentiation of mesenchymal stem cells. We refined the design of a spheroid culture device to facilitate the rapid formation of a large number of HUVEC spheroids, which were embedded into different concentrations of GelMA hydrogels. It is shown that the concentration of GelMA modulates the extent of formation of the capillary-like structures originating from the HUVEC spheroids. This cell-loaded hydrogel-based bone construct with a biomimetic dual ring structure can be potentially used for bone tissue engineering.

Many studies have shown that bio-scaffolds have important value for promoting axonal regeneration of injured spinal cord. Indeed, cell transplantation and bio-scaffold implantation are considered to be effective methods for neural regeneration. This study was designed to fabricate a type of three-dimensional collagen/silk fibroin scaffold (3D-CF) with cavities that simulate the anatomy of normal spinal cord. This scaffold allows cell growth in vitro and in vivo. To observe the effects of combined transplantation of neural stem cells (NSCs) and 3D-CF on the repair of spinal cord injury. Forty Sprague-Dawley rats were divided into four groups: sham (only laminectomy was performed), spinal cord injury (transection injury of T10 spinal cord without any transplantation), 3D-CF (3D scaffold was transplanted into the local injured cavity), and 3D-CF + NSCs (3D scaffold co-cultured with NSCs was transplanted into the local injured cavity. Neuroelectrophysiology, imaging, hematoxylin-eosin staining, argentaffin staining, immunofluorescence staining, and western blot assay were performed. Apart from the sham group, neurological scores were significantly higher in the 3D-CF + NSCs group compared with other groups. Moreover, latency of the 3D-CF + NSCs group was significantly reduced, while the amplitude was significantly increased in motor evoked potential tests. The results of magnetic resonance imaging and diffusion tensor imaging showed that both spinal cord continuity and the filling of injury cavity were the best in the 3D-CF + NSCs group. Moreover, regenerative axons were abundant and glial scarring was reduced in the 3D-CF + NSCs group compared with other groups. These results confirm that implantation of 3D-CF combined with NSCs can promote the repair of injured spinal cord. This study was approved by the Institutional Animal Care and Use Committee of People's Armed Police Force Medical Center in 2017 (approval No. 2017-0007.2).

An osteoblast‐laden nanocomposite hydrogel construct, based on polyethylene glycol diacrylate (PEGDA)/laponite XLG nanoclay ([Mg5.34Li0.66Si8O20(OH)4]Na0.66, clay)/hyaluronic acid sodium salt (HA) bio‐inks, is developed by a two‐channel 3D bioprinting method. The novel biodegradable bio‐ink A, comprised of a poly(ethylene glycol) (PEG)–clay nanocomposite crosslinked hydrogel, is used to facilitate 3D‐bioprinting and enables the efficient delivery of oxygen and nutrients to growing cells. HA with encapsulated primary rat osteoblasts (ROBs) is applied as bio‐ink B with a view to improving cell viability, distribution uniformity, and deposition efficiency. The cell‐laden PEG–clay constructs not only encapsulated osteoblasts with more than 95% viability in the short term but also exhibited excellent osteogenic ability in the long term, due to the release of bioactive ions (magnesium ions, Mg2+ and silicon ions, Si4+), which induces the suitable microenvironment to promote the differentiation of the loaded exogenous ROBs, both in vitro and in vivo. This 3D‐bioprinting method holds much promise for bone tissue regeneration in terms of cell engraftment, survival, and ultimately long‐term function. An osteoblast‐laden nanocomposite hydrogel construct is developed using a two‐channel 3D‐bioprinting method for bone regeneration. The cell‐laden scaffold reveals high cell viability (>95%) in the short term after 3D‐bioprinting and exhibits excellent osteogenic capability both in vitro and in vivo in the long term due to the bioactive ions that are gradually released.

Preservation and long-term storage of readily available cell-laden tissue-engineered products are major challenges in expanding their applications in healthcare. In recent years, there has been increasing interest in the development of off-the-shelf tissue-engineered products using the cryobioprinting approach. Here, bioinks are incorporated with cryoprotective agents (CPAs) to allow the fabrication of cryopreservable tissue constructs. Although this method has shown potential in the fabrication of cryopreservable tissue-engineered products, the impact of the CPAs on the viscoelastic behavior and printability of the bioinks at cryo conditions remains unexplored. In this study, we have evaluated the influence of CPAs such as glycerol and dimethyl sulfoxide (DMSO) on the rheological properties of pre-crosslinked alginate bioinks for cryoprinting applications. DMSO-incorporated bioinks showed a reduction in viscosity and yield stress, while the addition of glycerol improved both the properties due to interactions with the calcium chloride used for pre-crosslinking. Further, tube inversion and printability experiments were performed to identify suitable concentrations and cryobioprinting conditions for bioinks containing CPAs & pre-crosslinked with CaCl 2 . Finally, based on the printability analysis & cell recovery results, 10% glycerol was used for cryobioprinting and preservation of cell-laden constructs at −80 °C and the viability of cells within the printed structures were evaluated after recovery. Cell viability results indicate that the addition of 10% glycerol to the pre-crosslinked bioink significantly improved cell viability compared to bioinks without CPAs, confirming the suitability of the developed bioink combination to fabricate tissue constructs for on-demand applications. Graphical abstract Effect of cryoprotectants on the viscoelastic behavior of bioinks and cell recovery in cryobioprinted tissue constructs.

In the field of tissue engineering and regenerative medicine, various hydrogels derived from the extracellular matrix have been utilized for creating engineered tissues and implantable scaffolds. While these hydrogels hold immense promise in the healthcare landscape, conventional bioinks based on ECM hydrogels face several challenges, particularly in terms of lacking the necessary mechanical properties required for 3D bioprinting process. To address these limitations, researchers are actively exploring novel nanomaterial-reinforced ECM hydrogels for both mechanical and functional aspects. In this review, we focused on discussing recent advancements in the fabrication of engineered tissues and monitoring systems using nanobioinks and nanomaterials via 3D bioprinting technology. We highlighted the synergistic benefits of combining numerous nanomaterials into ECM hydrogels and imposing geometrical effects by 3D bioprinting technology. Furthermore, we also elaborated on critical issues remaining at the moment, such as the inhomogeneous dispersion of nanomaterials and consequent technical and practical issues, in the fabrication of complex 3D structures with nanobioinks and nanomaterials. Finally, we elaborated on plausible outlooks for facilitating the use of nanomaterials in biofabrication and advancing the function of engineered tissues.

Background Engineered living materials (ELMs) combine living cells with non-living scaffolds to obtain life-like characteristics, such as biosensing, growth, and self-repair. Some ELMs can be 3D-printed and are called bioinks, and their scaffolds are mostly hydrogel-based. One such scaffold is polymer Pluronic F127, a liquid at 4 °C but a biocompatible hydrogel at room temperature. In such thermally-reversible hydrogel, the microorganism-hydrogel interactions remain uncharacterized, making truly durable 3D-bioprinted ELMs elusive. Methods We demonstrate the methodology to assess cell-scaffold interactions by characterizing intact alive yeast cells in cross-linked F127-based hydrogels, using genetically encoded ratiometric biosensors to measure intracellular ATP and cytosolic pH at a single-cell level through confocal imaging. Results When embedded in hydrogel, cells were ATP-rich, in exponential or stationary phase, and assembled into microcolonies, which sometimes merged into larger superstructures. The hydrogels supported (micro)aerobic conditions and induced a nutrient gradient that limited microcolony size. External compounds could diffuse at least 2.7 mm into the hydrogels, although for optimal yeast growth bioprinted structures should be thinner than 0.6 mm. Moreover, the hydrogels could carry whole-cell copper biosensors, shielding them from contaminations and providing them with nutrients. Conclusions F127-based hydrogels are promising scaffolds for 3D-bioprinted ELMs, supporting a heterogeneous cell population primarily shaped by nutrient availability. Graphical Abstract

Plastic surgeons have used the reconstructive ladder for many decades as a standard directory for complex trauma reconstruction with the goal of repairing body structures and restoring functionality. This consists of different surgical maneuvers, such as secondary intention and direct tissue closure, as well as more complex methods such as local tissue transfer and free flap. The reconstructive ladder represents widely known options achievable for tissue reconstruction and wound closure that puts at the bottom rung the simplest methods of reconstruction and strengthens the complexity by moving upward. Regenerative medicine and surgery constitute a quickly spreading area of translational research that can be employed by minimally invasive surgical strategies, with the aim of regenerating cells and tissues in vivo in order to reestablish normal function through the intrinsic potential of cells, in combination with biomaterials and appropriate biochemical stimuli. These translational procedures have the aim of creating an appropriate microenvironment capable of supporting the physiological cellular function to generate the desired cells or tissues and to generate parenchymal, stromal, and vascular components on demand, and above all to produce intelligent materials capable of determining the fate of cells. Smart technologies have been grown that give extra “rungs” on the classic reconstructive ladder to integrate a more holistic, patient-based approach with improved outcomes. This commentary presents the evolution of the traditional concept of the reconstructive ladder in the field of plastic surgery into a new course with the aim of achieving excellent results for soft tissue reconstruction by applying innovative technologies and biologically active molecules for a wide range of surgical diseases.

The advent of bioprinting has enabled the creation of precise three‐dimensional (3D) cell cultures suitable for biomimetic in vitro models. In this study, we developed a novel protocol for 3D printing methacrylated collagen (ColMa, or PhotoCol®) combined with tendon stem/progenitor cells (hTSPCs) derived from human tendon explants. Although pure ColMa has not previously been proposed as a printable hydrogel, this paper outlines a robust and highly reproducible pipeline for bioprinting this material. Indeed, we successfully fabricated a 3D bioengineered scaffold and cultured it for 21 days under perfusion conditions with medium supplemented with growth/differentiation factor‐5 (GDF‐5). This bioprinting pipeline and the culture conditions created an exceptionally favorable 3D environment, enabling the cells to proliferate, exhibit tenogenic behaviors, and produce a new collagen type I matrix, thereby remodeling the surrounding environment. Indeed, over the 21‐day culture period under perfusion condition, tenomodulin expression showed a significant upregulation on day 7, with a 2.3‐fold increase, compared to days 14 and 21. Collagen type I gene expression was upregulated nearly 10‐fold by day 14. This trend was further confirmed by western blot analysis, which revealed a statistically significant difference in tenomodulin expression between day 21 and both day 7 and day 14. For type I collagen, significant differences were observed between day 0 and day 21, as well as between day 0 and day 14, with a p‐value of 0.01. These results indicate a progressive over‐expression of type I collagen, reflecting cell differentiation towards a proper tenogenic phenotype. Cytokines, such as IL‐8 and IL‐6, levels peaked at 8566 and 7636 pg/mL, respectively, on day 7, before decreasing to 54 and 46 pg/mL by day 21. Overall, the data suggest that the novel ColMa bioprinting protocol effectively provided a conducive environment for the growth and proper differentiation of hTSPCs, showcasing its potential for studying cell behavior and tenogenic differentiation.

Malignant tumors notably decrease life expectancy. Despite advances in cancer diagnosis and treatment, the mechanisms underlying tumorigenesis, progression and drug resistance have not been fully elucidated. An emerging method to study tumors is tumor organoids, which are a three-dimensional miniature structure. These retain the patient-specific tumor heterogeneity while demonstrating the histological, genetic and molecular features of original tumors. Compared with conventional cancer cell lines and animal models, patient-derived tumor organoids are more advanced at physiological and clinical levels. Their synergistic combination with other technologies, such as organ-on-a-chip, 3D-bioprinting, tissue-engineered cell scaffolds and clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9, may overcome limitations of the conventional 3D organoid culture and result in the development of more appropriate model systems that preserve the complex tumor stroma, inter-organ and intra-organ communications. The present review summarizes the evolution of tumor organoids and their combination with advanced technologies, as well as the application of tumor organoids in basic and clinical research.

Bioprinting technology shows potential in tissue engineering for the fabrication of scaffolds, cells, tissues and organs reproducibly and with high accuracy. Bioprinting technologies are mainly divided into three categories, inkjet-based bioprinting, pressure-assisted bioprinting and laser-assisted bioprinting, based on their underlying printing principles. These various printing technologies have their advantages and limitations. Bioprinting utilizes biomaterials, cells or cell factors as a “bioink” to fabricate prospective tissue structures. Biomaterial parameters such as biocompatibility, cell viability and the cellular microenvironment strongly influence the printed product. Various printing technologies have been investigated, and great progress has been made in printing various types of tissue, including vasculature, heart, bone, cartilage, skin and liver. This review introduces basic principles and key aspects of some frequently used printing technologies. We focus on recent advances in three-dimensional printing applications, current challenges and future directions.