Explore the vast range of titles available.

Recently, we have developed an algorithm to quantitatively evaluate the roughness of spherical microparticles using scanning electron microscopy (SEM) images. The algorithm calculates the root-mean-squared profile roughness (RMS-R Q ) of a single particle by analyzing the particle’s boundary. The information extracted from a single SEM image yields however only two-dimensional (2D) profile roughness data from the horizontal plane of a particle. The present study offers a practical procedure and the necessary software tools to gain quasi three-dimensional (3D) information from 2D particle contours recorded at different particle inclinations by tilting the sample (stage). This new approach was tested on a set of polystyrene core-iron oxide shell-silica shell particles as few micrometer-sized beads with different (tailored) surface roughness, providing the proof of principle that validates the applicability of the proposed method. SEM images of these particles were analyzed by the latest version of the developed algorithm, which allows to determine the analysis of particles in terms of roughness both within a batch and across the batches as a routine quality control procedure. A separate set of particles has been analyzed by atomic force microscopy (AFM) as a powerful complementary surface analysis technique integrated into SEM, and the roughness results have been compared.

In the following article, we present a simple, two-step method of creating spaced, hollow nanopillars, from the titania nanotube arrays via pulsed laser-treatment. Due to the high ordering of the structure, the prepared material exhibits photonic properties, which has been shown to increase the overall photoefficiency. The optical and morphological changes in the titania nanotubes after pulsed laser-treatment with 532, 355, and 266 nm wavelengths in the 10–50 mJ/cm 2 fluence range are studied. The investigation reveals, that by using appropriate wavelength and energy, the number of surface defects, geometrical features, or both can be tailored.

Super-resolution microscopy is typically not applicable to in situ imaging through a narrow channel due to the requirement for complex optics. Although multimode fibres (MMFs) have emerged as a potential platform for cost-effective and precise endoscopic imaging, they suffer from extreme sensitivity to bending and other external conditions. Here we demonstrate imaging through a single thin MMF for in vivo light-field encoded imaging with subcellular resolution. We refer to the technique as spatial-frequency tracking adaptive beacon light-field-encoded (STABLE) endoscopy. Spatial-frequency beacon tracking provides up to 1 kHz disorder tracking frequency, thus ensuring stable imaging through long-haul MMFs under fibre bending and various operating conditions. The full-vector modulation and fluorescence emission difference are combined to enhance the imaging signal-to-noise ratio and achieve a subdiffraction resolution of 250 nm. We integrate STABLE in a white-light endoscope and demonstrate cross-scale imaging in a bronchus model and in vivo imaging in mice models. The high-resolution and resilience to observation in a minimally invasive manner paves the way to the expansion of MMF in endoscopy to the study of disease mechanisms in biomedical sciences and clinical studies.Spatial-frequency tracking adaptive beacon light-field encoded endoscopy enables imaging through a single multimode fibre under bending and twisting. In vivo imaging with subcellular resolution is demonstrated in mice models.

X-ray ptychographic microscopy combines the advantages of raster scanning X-ray microscopy with the more recently developed techniques of coherent diffraction imaging. It is limited neither by the fabricational challenges associated with X-ray optics nor by the requirements of isolated specimen preparation, and offers in principle wavelength-limited resolution, as well as stable access and solution to the phase problem. In this Review, we discuss the basic principles of X-ray ptychography and summarize the main milestones in the evolution of X-ray ptychographic microscopy and tomography over the past ten years, since its first demonstration with X-rays. We also highlight the potential for applications in the life and materials sciences, and discuss the latest advanced concepts and probable future developments.

Base excision repair is the dominant DNA repair pathway of chemical modifications such as deamination, oxidation, or alkylation of DNA bases, which endanger genome integrity due to their high mutagenic potential. Detection and excision of these base lesions is achieved by DNA glycosylases. To investigate the remarkably high efficiency in target site search and recognition by these enzymes, we applied single molecule atomic force microscopy (AFM) imaging to a range of glycosylases with structurally different target lesions. Using a novel, automated, unbiased, high-throughput analysis approach, we were able to resolve subtly different conformational states of these glycosylases during DNA lesion search. Our results lend support to a model of enhanced lesion search efficiency through initial lesion detection based on altered mechanical properties at lesions. Furthermore, its enhanced sensitivity and easy applicability also to other systems recommend our novel analysis tool for investigations of diverse, fundamental biological interactions.

Light detection and ranging (LiDAR) technology, a laser-based imaging technique for accurate distance measurement, is considered one of the most crucial sensor technologies for autonomous vehicles, artificially intelligent robots and unmanned aerial vehicle reconnaissance. Until recently, LiDAR has relied on light sources and detectors mounted on multiple mechanically rotating optical transmitters and receivers to cover an entire scene. Such an architecture gives rise to limitations in terms of the imaging frame rate and resolution. In this Review, we examine how novel nanophotonic platforms could overcome the hardware restrictions of existing LiDAR technologies. After briefly introducing the basic principles of LiDAR, we present the device specifications required by the industrial sector. We then review a variety of LiDAR-relevant nanophotonic approaches such as integrated photonic circuits, optical phased antenna arrays and flat optical devices based on metasurfaces. The latter have already demonstrated exceptional functional beam manipulation properties, such as active beam deflection, point-cloud generation and device integration using scalable manufacturing methods, and are expected to disrupt modern optical technologies. In the outlook, we address the upcoming physics and engineering challenges that must be overcome from the viewpoint of incorporating nanophotonic technologies into commercially viable, fast, ultrathin and lightweight LiDAR systems. This Review highlights the technological challenges linked to the application of nanophotonics for light detection and ranging (LiDAR).

Metalenses have shown a number of promising functionalities that are comparable with conventional refractive lenses. However, current metalenses are still far from commercialization due to the formidable fabrication costs. Here, we demonstrate a low-cost dielectric metalens that works in the visible spectrum. The material of the metalens consists of a matrix-inclusion composite in which a hierarchy satisfies two requirements for the single-step fabrication; a high refractive index and a pattern-transfer capability. We use a UV-curable resin as a matrix to enable direct pattern replication by the composite, and titanium dioxide nanoparticles as inclusions to increase the refractive index of the composite. Therefore, such a dielectric metalens can be fabricated with a single step of UV nanoimprint lithography. An experimental demonstration of the nanoparticle composite-based metalens validates the feasibility of our approach and capability for future applications. Our method allows rapid replication of metalenses repeatedly and thereby provides an advance toward the use of metalenses on a commercial scale. Current metalenses are far from commercialization due to fabrication cost and low throughput. Here, the authors use a UV-curable resin as a matrix for direct pattern replication by the composite and TiO2 nanoparticles to increase the refractive index of the composite, allowing dielectric metalenses to be manufactured in a single step.

Two-dimensional hybrid organic-inorganic perovskites with strongly bound excitons and tunable structures are desirable for optoelectronic applications. Exciton transport and annihilation are two key processes in determining device efficiencies; however, a thorough understanding of these processes is hindered by that annihilation rates are often convoluted with exciton diffusion constants. Here we employ transient absorption microscopy to disentangle quantum-well-thickness-dependent exciton diffusion and annihilation in two-dimensional perovskites, unraveling the key role of electron-hole interactions and dielectric screening. The exciton diffusion constant is found to increase with quantum-well thickness, ranging from 0.06 ± 0.03 to 0.34 ± 0.03 cm 2  s −1 , which leads to long-range exciton diffusion over hundreds of nanometers. The exciton annihilation rates are more than one order of magnitude lower than those found in the monolayers of transition metal dichalcogenides. The combination of long-range exciton transport and slow annihilation highlights the unique attributes of two-dimensional perovskites as an exciting class of optoelectronic materials. Two-dimensional hybrid perovskites are promising excitonic materials; however, there currently lacks understanding on exciton diffusion and annihilation. Here Deng et al. employ transient absorption microscopy to disentangle quantum-well-thickness-dependent exciton transport and annihilation in these materials.

Visualizations of the microwave electric and magnetic near-field distributions of radio-frequency (RF) filters were performed using the technique of thermoelastic optical indicator microscopy (TEOIM). New optical indicators based on periodic dielectric-metal structures were designed for electric field visualization. Depending on the structure orientation, such metasurface-based indicators allow separately visualization of the E x and E y components of the in-plane electric field. Numerical simulations were conducted to examine the working principle of the designed indicator structures, and the results were compared to the experimental, showing good agreement. In addition, the 3D visualization of the microwave near-field distribution was built, to show the field intensity and distribution dependencies on the distance from the RF filter.

Defects can induce drastic changes of the electronic properties of two-dimensional transition metal dichalcogenides and influence their applications. It is still a great challenge to characterize small defects and correlate their structures with properties. Here, we show that tip-enhanced Raman spectroscopy (TERS) can obtain distinctly different Raman features of edge defects in atomically thin MoS 2 , which allows us to probe their unique electronic properties and identify defect types (e.g., armchair and zigzag edges) in ambient. We observed an edge-induced Raman peak (396 cm −1 ) activated by the double resonance Raman scattering (DRRS) process and revealed electron–phonon interaction in edges. We further visualize the edge-induced band bending region by using this DRRS peak and electronic transition region using the electron density-sensitive Raman peak at 406 cm −1 . The power of TERS demonstrated in MoS 2 can also be extended to other 2D materials, which may guide the defect engineering for desired properties. Probing inevitable defects in two- dimensional materials is challenging. Here, the authors tackle this issue by using tip-enhanced Raman spectroscopy (TERS) to obtain distinctly different Raman features of edge defects in atomically thin MoS 2 , and further probe their unique electronic properties as well as identify the armchair and zigzag edges.