Explore the vast range of titles available.

Purpose - The purpose of this paper is to develop a waste framework for motor carrier operations by adapting the classical 7 waste framework, and furthermore, to validate it by collecting empirical data from several motor carrier operators.Design methodology approach - The chosen approach includes three steps, starting with analyzing qualitative data from a literature review and an interview study. The interviewees were experts from carrier operations, the lean field, carrier technology providers and carrier service buyers. The findings were validated with qualitative and quantitative studies at five motor carrier operators.Findings - The finding of this paper is a waste framework adapted to motor carrier operations that has been based on the classical 7 waste framework. This provides a structured framework of inefficiencies found in motor carrier operations.Originality value - Previous literature is scarce on both holistic approaches to describing waste in carrier operations and in-depth studies of day-to-day transport operations. It is also a novel approach to use a waste framework for transport operations.

An alarming increase in pollution due to untreated dye wastes from industries is offering challenges to scientists to utilize a greener approach for water treatment. The current project is a non-toxic and eco-friendly green synthesis of iron-oxide (Fe 2 O 3 ) and nickel-oxide (NiO) nanohybrids from an aqueous extract of Prunus armeniaca (apricot) unripe fruit (used as a capping and reducing agent). The synthesized nanohybrids are categorized by toxicity assessment, UV-visible, FTIR, SEM, Zeta Potential, NTA and XRD analyses and are enhanced for Acid Orange 7 (AO7) dye remediation. The maximum amount of remediation is observed by taking the concentration of dye at 0.002 g/L, concentration of Fe 2 O 3 /NiO nanohybrids at 0.02/0.04 g/L respectively, temperature of 70 °C at pH five and H 2 O 2 of 0.004% concentration. The treated dye samples have been used to measure various water quality parameters exhibiting COD (82.1%) and TOC (81.1%). The toxicity assessment is 2.008% (Fe 2 O 3 ) and 1.434% (NiO). Graphical Abstract

A technical and economic review of emerging waste disposal technologies Intended for a wide audience ranging from engineers and academics to decision-makers in both the public and private sectors, Municipal Solid Waste to Energy Conversion Processes: Economic, Technical, and Renewable Comparisons reviews the current state of the solid waste disposal industry. It details how the proven plasma gasification technology can be used to manage Municipal Solid Waste (MSW) and to generate energy and revenues for local communities in an environmentally safe manner with essentially no wastes. Beginning with an introduction to pyrolysis/gasification and combustion technologies, the book provides many case studies on various waste-to-energy (WTE) technologies and creates an economic and technical baseline from which all current and emerging WTE technologies could be compared and evaluated. Topics include: Pyrolysis/gasification technology, the most suitable and economically viable approach for the management of wastes Combustion technology Other renewable energy resources including wind and hydroelectric energy Plasma economics Cash flows as a revenue source for waste solids-to-energy management Plant operations, with an independent case study of Eco-Valley plant in Utashinai, Japan Extensive case studies of garbage to liquid fuels, wastes to electricity, and wastes to power ethanol plants illustrate how currently generated MSW and past wastes in landfills can be processed with proven plasma gasification technology to eliminate air and water pollution from landfills.

The tremendous increase in agro-industrial waste poses major environmental problems and highlights the need for innovative, sustainable solutions. One promising solution would be converting these organic wastes, such as unvalued pineapple peels (ANA) and brewer’s grains (ECB), into activated carbons to meet the impending challenge of wastewater treatment. In particular, Acid Orange 7 (AO7) is one of the most widely used synthetic dyes, a significant portion of which ends up in water, posing environmental and health problems with limiting decentralized and cost-effective solutions. To address these two challenges, we investigated the best conditions for converting these organic wastes into alternative activated carbons (named CA-ANA and CA-ECB) for AO7 dye removal under representative adsorption conditions. Extensive characterization (SEM, EDX, XRD, BET) revealed an amorphous, mesoporous structure with specific surface areas of 1150–1630 m2 g−1, outperforming the majority of other biomass-derived activated carbons reported for AO7 removal. Adsorption followed pseudo-second-order kinetics and the Langmuir isotherm, with record AO7 removal efficiencies of 90–99% for AO7 concentrations of 25–35 mg L−1 in a batch reactor, the driving forces being electrostatic attraction, π–π interactions, and hydrogen bonding. These results undoubtedly highlight the potential of current waste-derived activated carbons as sustainable solutions for efficient wastewater treatment.

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.

Excess sludge in the paper industry is a hazardous solid waste that requires urgent and proper disposal for environmental protection and resource utilization. In this study, a novel magnetic biochar (Fe-SDBC) synthesized from paper sludge through one-step pyrolysis was employed to activate persulfate (PDS) for the efficient removal of acid orange 7 (AO7). The results indicated that Fe-SDBC could effectively activate PDS to remove 97.8% of AO7 within 90 min, with 89.4% removed within 5 min. Fe-SDBC had unique properties with abundant adsorption and active sites, including iron-containing compounds and oxygen-containing functional groups. The addition concentrations of Fe-SDBC (0.5 g/L) and PDS (10 mM) were optimized based on response surface methodology. Furthermore, Fe-SDBC presented good stability over a wide range of pH (3 ~ 11) and reusability in cyclic experiments. Coexisting ions, such as CO 3 2− , HCO 3 − , and PO 4 3− , had an inhibitory effect on AO7 removal. Both radical and non-radical pathways were proved to be involved in the Fe-SDBC/PDS system for AO7 removal, with singlet oxygen ( 1 O 2 ) being the dominant species. Additionally, the degradation pathways were investigated and toxicity assessment was evaluated. This work will provide a potential approach for paper sludge recycling in the wastewater treatment. Graphical Abstract

In this study, different types of magnetic biochar nanocomposites were synthesized using the co-precipitation method. Two biochar materials, namely, sewage sludge biochar and woodchips biochar, were prepared at two different temperatures, viz., 450 and 700 °C. These biochars were further modified with magnetic nanoparticles (Fe 3 O 4 ). The modified biochar nanocomposites were characterized using field emission–scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET), SQUID analysis, X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FTIR). The potential of prepared adsorbents was examined for the removal of hexavalent chromium (Cr(VI)) and Acid orange 7 (AO7) dye from water as a function of various parameters, namely, contact time, pH of solution, amount of adsorbents, and initial concentrations of adsorbates. Various kinetic and isotherm models were tested to discuss and interpret the adsorption mechanisms. The maximum adsorption capacities of modified biochars were found as 80.96 and 110.27 mg g -1 for Cr(VI) and AO7, respectively. Magnetic biochars showed high pollutant removal efficiency after 5 cycles of adsorption/desorption. The results of this study revealed that the prepared adsorbents can be successfully used for multiple cycles to remove Cr(VI) and AO7 from water. Graphical Abstract

For the first time, the deposition area of heavy metals and other trace elements (Al, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, P, Pb, S, Sr, Sb, V, Zn, and Hg) on the territory surrounding a landfill of domestic (municipal) waste at the 9th km of the Vilyuisky tract of Yakutsk within a radius of 51 km was assessed using the method of moss biomonitors and ICP-OES as an analytical technique. Mosses were analyzed for radionuclide content (40K, 137Cs, 212 Pb, 214Pb, 212Bi, 214Bi, 208Tl, 7Be, and 228Ac) in a number of selected samples by semiconductor gamma spectrometry. The results of the examination of moss samples by ICP-OES indicate the presence of large amounts of toxic Ba and metal debris (Al, Co, Cr, Fe, S, and Pb) at the landfill. In addition, it is shown that the investigated samples contain elements such as Cd, Co, Cr, Cu, Cu, Mn, Ni, Pb, Sr, V, Zn, and Hg. The method of gamma spectrometry revealed that the studied samples contain such radioactive elements as 137Cs, daughter products of 238U and 232Th. Detection of the same heavy metals and radionuclides in the atmospheric air of the city and in the vegetation near the landfill may indicate that one of the sources of environmental pollution may be products of incineration of the landfill contents at the 9th km of the Vilyuisky tract.

The rapid growth of global industrialization and urbanization has led to the excessive use of non-renewable energy sources and the alarming release of greenhouse gases within the construction industry. In response, adopting sustainable and environmentally friendly building materials has emerged as a vital solution for achieving the international sustainable development goals set by the United Nations. This review discusses the potential benefits of incorporating biochar-based bricks and insulation materials, focusing on their preparation methods, material properties, emission reduction capabilities, effectiveness in reducing carbon emissions, enhancing thermal insulation, and promising economic prospects. The major points are: (1) Biochar-based materials offer significant potential for reducing the carbon footprint of buildings and enhancing their thermal insulation properties. (2) With a thermal conductivity ranging from 0.08 to 0.2 W/(m·K), biochar insulation materials contribute to reduced energy consumption and greenhouse gas emissions. (3) Replacing one ton of cement with biochar in brick production can substantially reduce 1351–1505 kg CO2-eq over the entire life cycle. (4) Using biochar as part of concrete insulation saves about 59–65 kg of carbon dioxide per ton while offering clear economic benefits. Although biochar insulation is comparatively more expensive than traditional insulation materials like fiberglass and foam, its energy-saving advantages can balance the extra cost. (5) Biochar insulation is derived from organic waste, contributing to improved recyclability, environmental sustainability, and cost-effectiveness.

Background The ability of oxidative enzyme-producing micro-organisms to efficiently valorize organic pollutants is critical in this context. Yeasts are promising enzyme producers with potential applications in waste management, while lipid accumulation offers significant bioenergy production opportunities. The aim of this study was to explore manganese peroxidase-producing oleaginous yeasts inhabiting the guts of wood-feeding termites for azo dye decolorization, tolerating lignocellulose degradation inhibitors, and biodiesel production. Results Out of 38 yeast isolates screened from wood-feeding termite gut symbionts, nine isolates exhibited high levels of extracellular manganese peroxidase (MnP) activity ranged between 23 and 27 U/mL after 5 days of incubation in an optimal substrate. Of these MnP-producing yeasts, four strains had lipid accumulation greater than 20% (oleaginous nature), with Meyerozyma caribbica SSA1654 having the highest lipid content (47.25%, w/w). In terms of tolerance to lignocellulose degradation inhibitors, the four MnP-producing oleaginous yeast strains could grow in the presence of furfural, 5-hydroxymethyl furfural, acetic acid, vanillin, and formic acid in the tested range. M. caribbica SSA1654 showed the highest tolerance to furfural (1.0 g/L), 5-hydroxymethyl furfural (2.5 g/L) and vanillin (2.0 g/L). Furthermore, M. caribbica SSA1654 could grow in the presence of 2.5 g/L acetic acid but grew moderately. Furfural and formic acid had a significant inhibitory effect on lipid accumulation by M. caribbica SSA1654, compared to the other lignocellulose degradation inhibitors tested. On the other hand, a new MnP-producing oleaginous yeast consortium designated as NYC-1 was constructed. This consortium demonstrated effective decolorization of all individual azo dyes tested within 24 h, up to a dye concentration of 250 mg/L. The NYC-1 consortium's decolorization performance against Acid Orange 7 (AO7) was investigated under the influence of several parameters, such as temperature, pH, salt concentration, and co-substrates (e.g., carbon, nitrogen, or agricultural wastes). The main physicochemical properties of biodiesel produced by AO7-degraded NYC-1 consortium were estimated and the results were compared to those obtained from international standards. Conclusion The findings of this study open up a new avenue for using peroxidase-producing oleaginous yeasts inhabiting wood-feeding termite gut symbionts, which hold great promise for the remediation of recalcitrant azo dye wastewater and lignocellulosic biomass for biofuel production.