Explore the vast range of titles available.

Large amount of wastes are burnt or left to decompose on site or at landfills where they cause air pollution and nutrient leaching to groundwater. Waste management strategies that return these food wastes to agricultural soils recover the carbon and nutrients that would otherwise have been lost, enrich soils and improve crop productivity. The incorporation of liming materials can neutralize the protons released, hence reducing soil acidity and its adverse impacts to the soil environment, food security, and human health. Biochar derived from organic residues is becoming a source of carbon input to soil and provides multifunctional values. Biochar can be alkaline in nature, with the level of alkalinity dependent upon the feedstock and processing conditions. This study conducted a characterization of biochar derived from the pyrolysis process of eggplant and Acacia nilotica bark at temperatures of 300 °C and 600 °C. An analysis was conducted on the biochar kinds to determine their pH, phosphorus (P), as well as other elemental composition. The proximate analysis was conducted by the ASTM standard 1762-84, while the surface morphological features were measured using a scanning electron microscope. The biochar derived from Acacia nilotica bark exhibited a greater yield and higher level of fixed carbon while possessing a lower content of ash and volatile components compared to biochar derived from eggplant. The eggplant biochar exhibits a higher liming ability at 600 °C compared to the acacia nilotica bark-derived biochar. The calcium carbonate equivalent, pH, potassium (K), and phosphorus (P) levels in eggplant biochars increased as the pyrolysis temperature increased. The results suggest that biochar derived from eggplant could be a beneficial resource for storing carbon in the soil, as well as for addressing soil acidity and enhancing nutrients availability, particularly potassium and phosphorus in acidic soils.

Purpose In this study, two main research objectives were examined: (1) the cytotoxic and anticancer activities of the aqueous methanol extract from Acacia nilotica flowers on three human cancer cells, namely lung A549, breast MCF-7, and leukemia THP-1 cells, and (2) the genotoxic effects of A. nilotica extract and its influence on DNA damage induced by N-methyl-N-nitrosourea (MNU) in mice. Methods Mice were orally treated with A. nilotica extract (200, 500, and 800 mg/kg for 4 days) with or without MNU (80 mg/kg intraperitoneally for 24 h). Results In vitro experiments showed that A549 cells were the most sensitive to A. nilotica extract among the tested cell lines. A. nilotica extract inhibited A549 cell proliferation by blocking the cell cycle at the G 2 /M phase and accumulating apoptotic cells in the sub-G 0 /G 1 phase in A549 cells. In vivo experiments showed that MNU induced positive and negative genotoxicity in bone marrow cells and spermatocytes, respectively. Negative genotoxicity was observed in A. nilotica extract-treated groups only. However, A. nilotica extract (800 mg/kg) remarkably increased comet tail formation in bone marrow cells. Unexpectedly, the absence of antigenotoxicity was observed in three cotreated groups with A . nilotica extract and MNU compared with the MNU-treated group. Astonishingly, cotreatment with MNU and A. nilotica extract at a dose above 200 mg/kg remarkably increased micronucleus and comet tail formation in bone marrow cells compared with the MNU-treated group. Conclusions A. nilotica extract possessed anticancer activity with relative genotoxic effects at high doses.

The pods of Acacia nilotica were successfully utilized for the extraction of tannins using a methanol/water extraction medium. The experimental design employed for the extraction was a central composite design that enabled the evaluation of the effects of time, temperature, and methanol concentration on the dependent variables of extraction yield, total phenolic contents (TPC, as gallic acid equivalents (GAE)), and antioxidant activity (AA, as millimoles of ascorbic acid equivalents (AAE)). Response surface models were developed for the three responses, and statistical analysis of variance was performed to determine the optimum values of the independent variables and the coefficients of determination. The maximum extraction yield of 46.2 wt% (pod extract) was achieved at 200 min, 85 °C, and 40% methanol concentration. Similar conditions also led to the attainment of 50.7 wt% TPC and 51.3 mmol AAE/100 g pod. The coefficients of determinations were 0.9750 for extraction yield, 0.9626 for TPC, and 0.9774 for AA, which indicated that the model equations obtained fitted the experimental data. The result of the retanning of the leather using the extracted A. nilotica tannins also showed that the tear and tensile strength, as well as the elongation at break, of the leather samples were within the range obtained when chestnut extract and chrome tannin were used.

Natural dyes have promising features; however, there are some drawbacks limiting their application in textile dyeing, for example, low dyeing, and fastness properties due to the weak interaction with textiles. Many attempts have been made to improve these shortcomings by using additional chemicals such as metallic mordants which are classified as hazardous chemicals that cause some serious environmental problems. Therefore, we have designed a facile green method for the extraction of natural dye from Henna leaves using Acacia nilotica pods to improve the color intensity and enhance fibers/dye affinity. In this study, wool fabrics were dyed with Henna and Henna/Acacia dye at different dyeing conditions. FTIR and UV–vis spectrums showed peaks corresponding to tannin and its derivatives in the aqueous extract of modified Henna. Modified Henna dyed samples exhibited noticeable improvement in the color strength (K/S value), washing, rubbing, and lightfastness with excellent antibacterial activity against E. coli and S. aureus.Graphic abstract

Acacia nilotica proteinase inhibitor (AnPI) was isolated by ammonium sulphate precipitation followed by chromatography on DEAE-Sephadex A-25 and resulted in a purification of 10.68-fold with a 19.5% yield. Electrophoretic analysis of purified AnPI protein resolved into a single band with molecular weight of approximately 18.6 + 1.00 kDa. AnPI had high stability at different pH values (2.0 to 10.0) except at pH 5.0 and are thermolabile beyond 80°C for 10 min. AnPI exhibited effective against total proteolytic activity and trypsin-like activity, but did not show any inhibitory effect on chymotrypsin activity of midgut of Helicoverpa armigera. The inhibition kinetics studies against H. armigera gut trypsin are of non-competitive type. AnPI had low affinity for H. armigera gut trypsin when compared to SBTI. The partially purified and purified PI proteins-incorporated test diets showed significant reduction in mean larval and pupal weight of H. armigera. The results provide important clues in designing strategies by using the proteinase inhibitors (PIs) from the A. nilotica that can be expressed in genetically engineered plants to confer resistance to H. armigera.

Background Acacia nilotica Linn. is a widely distributed tree known for its applications in post-harvest and medicinal horticulture. However, its seed-based growth is relatively slow. Seed is a vital component for the propagation of A. nilotica due to its cost-effectiveness, genetic diversity, and ease of handling. Colchicine, commonly used for polyploidy induction in plants, may act as a pollutant at elevated levels. Its optimal concentration for Acacia nilotica 's improved growth and development has not yet been determined, and the precise mechanism underlying this phenomenon has not been established. Therefore, this study investigated the impact of optimized colchicine (0.07%) seed treatment on A. nilotica 's morphological, anatomical, physiological, fluorescent, and biochemical attributes under controlled conditions, comparing it with a control. Results Colchicine seed treatment significantly improved various plant attributes compared to control. This included increased shoot length (84.6%), root length (53.5%), shoot fresh weight (59.1%), root fresh weight (42.8%), shoot dry weight (51.5%), root dry weight (40%), fresh biomass (23.6%), stomatal size (35.9%), stomatal density (41.7%), stomatal index (51.2%), leaf thickness (11 times), leaf angle (2.4 times), photosynthetic rate (40%), water use efficiency (2.2 times), substomatal CO 2 (36.6%), quantum yield of photosystem II (13.1%), proton flux (3.1 times), proton conductivity (2.3 times), linear electron flow (46.7%), enzymatic activities of catalase (25%), superoxide dismutase (33%), peroxidase (13.5%), and ascorbate peroxidase (28%), 2,2-diphenyl-1-picrylhydrazyl-radical scavenging activities(23%), total antioxidant capacity (59%), total phenolic (23%), and flavonoid content (37%) with less number of days to 80% germination (57.1%), transpiration rate (53.9%), stomatal conductance (67.1%), non-photochemical quenching (82.8%), non-regulatory energy dissipation (24.3%), and H 2 O 2 (25%) and O −2 levels (30%). Conclusion These findings elucidate the intricate mechanism behind the morphological, anatomical, physiological, fluorescent, and biochemical transformative effects of colchicine seed treatment on Acacia nilotica Linn. and offer valuable insights for quick production of A. nilotica ’s plants with modification and enhancement from seeds through an eco-friendly approach.

A continuous mode fixed-bed up-flow column adsorption analysis was conducted utilizing Acacia nilotica sawdust activated carbon (ASAC) as an adsorbent for the adsorption treatment of toxic Indigo Carmine Dye (ICD). The effect on the adsorption characteristics of ASAC of the influent ICD concentration, flow rate, and column bed depth has been investigated. According to the column study, the highest efficiency of ICD removal was approximately 79.01% at a preliminary concentration of 100 mg/L with a flow rate of 250 mL/h at a bed depth of 30 cm and adsorption power of 24.67 mg/g. The experimental work confirmed the dependency of break-through curves on dye concentration and flow rate for a given bed depth. Kinetic models were implemented by Thomas, Yoon–Nelson, and Bed-depth-service-time analysis along with error analysis to interpret experimental data for bed depth of 15 cm and 30 cm, ICD concentration of 100 mg/L and 200 mg/L and flow rate of 250 mL/h, and 500 mL/h. The analysis predicted the breakthrough curves using a regression basin. It indicated that all three models were comparable for the entire break-through curve depiction. The characteristic parameters determined by process design and error analysis revealed that the Thomas model was better followed by the BDST and Yoon–Nelson models in relating the procedure of ICD adsorption onto ASAC. B-E-T surface area and B-E-T pore volume of ASAC were 737.76 m 2 /g and 0.2583 cm 3 /g, respectively. S-E-M and X-R-D analysis reveal the micro-porous and amorphous nature of ASAC. F-T-I-R spectroscope indicate distinctive functional assemblies like -OH group, C–H bond, C–C bond, C–OH, and C–O groups on ASAC. It could be computed that the ASAC can be used efficiently as an alternative option for industrial wastewater treatment

Medicinal plants are in use of humankind since ancient and still they are playing an important role in effective and safer natural drug delivery systems. Acacia nilotica (native of Egypt) commonly known as babul belongs to family Fabaceae, widely spread in India, Sri Lanka and Sudan. Being a common and important plant, using in many ways from fodder (shoots and leaves to animals) to dyeing (leather coloration) to medicine (root, bark, leaves, flower, gum, pods). The present study is focused on investigating the natural chemistry and important biological activities of the plant. Employing bioassay guided fractionation coupled with TLC and column chromatography, a pure fraction named AN-10 was isolated from ethyl acetate fraction of crude methanol extract which identified as “Betulin (Lupan-3ß,28-diol)” by Liebermann-Burchard test and structure elucidation by UV–Vis, NMR and MS techniques. A battery of in vitro biological assays for antioxidant, anti-inflammatory and anticancer were performed and betulin showed excellent potential in all assays. It was found that the inhibitory potential in all assays were dose dependent manner and after a range of concentration, the activities get leveled off with no further increase in activity.