Explore the vast range of titles available.

Widely regarded as the standard text on EMC, this book provides all the key information needed to meet the requirements of the latest EMC Directive. Most importantly, it shows how to incorporate EMC principles into the product design process, avoiding cost and performance penalties, meeting the needs of specific standards and resulting in a better overall product. As well as covering the very latest legal requirements, the Fourth Edition has been thoroughly updated in line with the latest best practice in EMC compliance and product design. Coverage has been considerably expanded to include the R&TTE and Automotive EMC Directives, as well the military aerospace standards of DEF STAN 59-41 and DO160E. A new chapter on systems EMC is included, while short case studies demonstrate how EMC product design is put into practice. Electronic design engineers, compliance engineers, regulatory engineers, test engineers, EMC consultants, and managers responsible for product compliance and product design will benefit from this book.

Lab appliances are an integral part of orthodontics, from active treatment to retention. The quality and fit of an appliance can affect the treatment result and stability. AIMS: This study aims to determine common points of failure in orthodontic appliances, and suggest methods to reduce this rate. METHODS: A survey consisting of 23 questions was distributed to active members of the American Association of Orthodontists (AAO) via Survey Monkey. RESULTS: The most common appliance to need an adjustment was the wrap-around retainer, with the Hawley retainer as a close second. The least common appliance needing adjustment was the Essix/clear retainer. Respondents were asked which component of each appliance was most commonly responsible for an ill-fit. For Hawley and wrap-around retainers, clasps were the most common problem at 50%, whereas spring aligners had two components - clasps and labial bows, both at 38%. Ill-fitting Essix/clear retainers had gingival impingement (52%) closely followed by poor posterior seating (43%). CONCLUSIONS: Communication between the orthodontist and lab technician can be improved by establishing a quality assurance protocol for outgoing and incoming cases. The labial bow of Hawley's, wrap-arounds and spring aligners should be clearly demarcated on the casts. Impressions should be free of distortion and casts should be inspected for accuracy. Clear retainers and positioner should be trimmed to avoid gingival impingement. The type of clasp should be selected based on the anatomy of the teeth, and bands should be checked for accuracy of fit.

Energy efficiency and conservation are considered key means for reducing greenhouse gas emissions and achieving other energy policy goals, but associated market behavior and policy responses have engendered debates in the economic literature. We review economic concepts underlying consumer decision making in energy efficiency and conservation and examine related empirical literature. In particular, we provide an economic perspective on the range of market barriers, market failures, and behavioral failures that have been cited in the energy efficiency context. We assess the extent to which these conditions provide a motivation for policy intervention in energyusing product markets, including an examination of the evidence on policy effectiveness and cost. Although theory and empirical evidence suggests there is potential for welfare-enhancing energy efficiency policies, many open questions remain, particularly relating to the extent of some key market and behavioral failures.

Background and Objectives: Anterior open-bite malocclusion remains a challenging orthodontic condition where achieving a positive overbite necessitates precise control of incisor extrusion and molar intrusion. With recent advances in clear aligner therapy—improved materials, attachment techniques and digital treatment planning—the potential for non-invasive treatment has increased. This scoping review systematically maps the evidence on the efficacy of clear aligners in treating anterior open bite among adult patients, outlines treatment protocols and highlights gaps in the literature. Materials and Methods: A systematic search was conducted in PubMed/Medline, Embase/ScienceDirect and Clarivate/Web of Science for literature published in English between January 2000 and December 2024. Studies involving adult patients treated with clear aligners (predominantly Invisalign®) were included. A two-step screening process was applied, and data were charted according to pre-specified criteria. The review adheres to the PRISMA-ScR checklist guidelines. Results: From an initial pool of 802 articles, 30 met the inclusion criteria following duplicate removal and full-text screening. The evidence suggests that clear aligners can achieve measurable incisor extrusion and posterior intrusion when appropriate auxiliary techniques (e.g., attachments and mini screws) are used. However, digital treatment planning software may overestimate movement predictions, necessitating iterative refinement phases. Patient compliance, clinician expertise and technological limitations are key factors influencing outcomes. Conclusions: Clear aligner therapy represents a promising alternative to fixed appliances for anterior open-bite correction in adults, although challenges remain in achieving precise vertical control. Further high-quality randomized controlled trials and standardized outcome measures are needed to confirm long-term stability and efficacy.

Background Chin cup is regarded as the oldest orthodontic appliance for the management of Class III malocclusion. To assess its clinical effectiveness in pre-pubertal patients, a meta-analysis on specific cephalometric values is attempted. Methods Detailed electronic and hand searches with no restrictions were performed up to July 2014. Only randomized controlled trials (RCTs) and cohort studies, i.e. prospective controlled trials (pCCTs) and (retrospective) observational studies (OS), were included. Analyses were performed by calculating the standard difference in means and the corresponding 95% confidence intervals, using the random effects model. Data heterogeneity and risk of bias assessment of the included studies were also performed. Study selection, data extraction and risk of bias assessment were performed twice. The level of significance was set at P ≤ 0.05 for all tests, except for heterogeneity ( P ≤ 0.1). Results Seven treated groups from five studies (no RCTs, four pCCTs, one OS) were eligible for inclusion, assessing only the short-term occipital pull chin cup effects. In total, 120 treated patients (mean age: 8.5 to 11 years) compared with 64 untreated individuals (mean age: 7.3 to 9.89 years) were assessed by means of 13 cephalometric variables. The overall quality of these studies was low to medium. In comparison to untreated individuals, the SNB and gonial angles decreased significantly following chin cup use, whereas ANB, Wits appraisal, SN-ML, N-Me and overjet increased. For the rest of the variables, no statistically significant differences were detected. Conclusions Although the occipital chin cup affects significantly a number of skeletal and dentoalveolar cephalometric variables, indicating an overall positive effect for the treatment of Class III malocclusion, data heterogeneity and between-studies variance impose precaution in the interpretation of the results.

Between 1982 and 2006, there were 89 distinct publications dealing with oral appliance therapy involving a total of 3,027 patients, which reported results of sleep studies performed with and without the appliance. These studies, which constitute a very heterogeneous group in terms of methodology and patient population, are reviewed and the results summarized. This review focused on the following outcomes: sleep apnea (i.e. reduction in the apnea/hypopnea index or respiratory disturbance index), ability of oral appliances to reduce snoring, effect of oral appliances on daytime function, comparison of oral appliances with other treatments (continuous positive airway pressure and surgery), side effects, dental changes (overbite and overjet), and long-term compliance. We found that the success rate, defined as the ability of the oral appliances to reduce apnea/hypopnea index to less than 10, is 54%. The response rate, defined as at least 50% reduction in the initial apnea/hypopnea index (although it still remained above 10), is 21%. When only the results of randomized, crossover, placebo-controlled studies are considered, the success and response rates are 50% and 14%, respectively. Snoring was reduced by 45%. In the studies comparing oral appliances to continuous positive airway pressure (CPAP) or to uvulopalatopharyngoplasty (UPPP), an appliance reduced initial AHI by 42%, CPAP reduced it by 75%, and UPPP by 30%. The majority of patients prefer using oral appliance than CPAP. Use of oral appliances improves daytime function somewhat; the Epworth sleepiness score (ESS) dropped from 11.2 to 7.8 in 854 patients. A summary of the follow-up compliance data shows that at 30 months, 56-68% of patients continue to use oral appliance. Side effects are relatively minor but frequent. The most common ones are excessive salivation and teeth discomfort. Efficacy and side effects depend on the type of appliance, degree of protrusion, vertical opening, and other settings. We conclude that oral appliances, although not as effective as CPAP in reducing sleep apnea, snoring, and improving daytime function, have a definite role in the treatment of snoring and sleep apnea.

This article describes the analysis of monetary and energy savings attributable to various energy efficiency levels considered as potential US federal standards for residential clothes dryers. The analysis examined benefits to both consumers and the nation as a whole. Benefits to consumers were evaluated based on the life-cycle cost of affected appliances and the payback period associated with increased first costs. Benefits to the nation incorporate both energy and financial savings associated with each potential efficiency standard. The analysis incorporated the most current information on field use of clothes dryers, which shows that dryer usage and the moisture in clothes are less than previously thought. The analysis found that high-efficiency heat pump clothes dryers would be cost-effective for nearly one fifth of US households. However, for both electric standard and gas clothes dryers, standards that improve efficiency by 5 % appear to be the highest levels that have a positive net present value of consumer benefit.

In order to project the potential energy savings from implementing energy efficiency policy, realistic usage profiles are essential. In the case of televisions (TVs), these usage profiles can be complex due to the range of functions TVs provide, the increasing number of TVs per household, the increasing hours of TV viewing, and the changing usage of a TV over its lifetime. Calculating the energy use of a TV over its lifetime is a challenge because, when a new TV is purchased, the old TV is often maintained and used less frequently in another room in the home, rather than being disposed of. Due to limited access to comprehensive usage data, previous analyses have either assumed a single static usage value, based on either metered or survey data, or estimated a usage profile adjusted from measured values to account for possible increases in future viewing. In this analysis, we investigate detailed TV usage over time using historical metered TV use data from more than 12,000 U.S. households, collected by The Nielsen Company. We found that the main TV in a household is used for 7.2 h per day, while other TVs are used for 2.5 h per day or less. We also found that 65 % of TVs in the total stock are considered the “main” TV. Combining this information, we determined the mean hours per day per TV to be 5.5.

Key Points Emphasises the ethical and legal requirements that dentists must provide when writing instructions to a technician. Highlights that a high proportion of prescriptions received by technicians are non-compliant. Recommends that further undergraduate training in laboratory prescription writing is needed. Suggests the whole dental team needs to be educated regarding communication. Aim To discover the quality of written instructions from dentists to dental technicians and the nature of non-compliant prescriptions. Method An audit of laboratory prescription compliance was conducted within an NHS Trust Dental Teaching Hospital to determine the level of communication between dentists and dental technicians. One hundred and fifty prescriptions were audited from dental undergraduates and qualified dentists throughout the different departments. Results A total of two-thirds of prescriptions were considered non-compliant and failed to meet relevant ethical and legal guidelines. This problem was seen throughout all departments and at all professional levels. Conclusion A breakdown in communication between dentists and technicians through the use of prescriptions is evident even within a close working environment.

Tajikistan's electricity system is in a state of crisis. Approximately 70 percent of the Tajik people suffer from extensive shortages of electricity during the winter. These shortages, estimated at about 2,700 GWh, about a quarter of winter electricity demand, impose economic losses estimated at over United States (US) 200 million dollars per annum or 3 percent of Gross Domestic Product (GDP). The electricity shortages have not been addressed because investments have not been made in new electricity supply capacity and maintenance of existing assets has not improved. The financial incentive for electricity consumers to reduce their consumption is inadequate as electricity prices are among the lowest in the world. Without prompt action to remedy the causes of Tajikistan's electricity crisis and with growing demand, the shortages could increase to about 4,500 GWh by 2016 (over a third of winter electricity demand) or worse. The World Bank undertook this study to assist the Government of Tajikistan (GoT) in finding ways to overcome the current electricity shortages and establish a sound basis for meeting the growing electricity demand in Tajikistan. The study focuses on the investments and policy reforms needed between now and 2020 to strengthen the financial, technical and institutional capacity of the Tajik power sector and prepare the GoT for undertaking a major expansion of power supply capacity. The study excludes large hydropower plants with storage, given their complexity and global experience that such projects are subject to delays. The winter electricity shortages are caused by a combination of low hydropower output during winter when river flows are low and high demand driven by heating needs. The GoT should focus its immediate attention on three ways to eliminate the current winter power shortages: 1) ambitious energy efficiency plans to reduce uneconomic power usage; 2) new dual-fired thermal power supply to complement the existing hydropower supply during winter; and 3) increased energy imports to leverage surplus electricity supply in neighboring countries.