Explore the vast range of titles available.

Background Improper acetabular component orientation in THA has been associated with increased dislocation rates, component impingement, bearing surface wear, and a greater likelihood of revision. Therefore, any reasonable steps to improve acetabular component orientation should be considered and explored. Questions/purposes We therefore sought to compare THA with a robotic-assisted posterior approach with manual alignment techniques through a posterior approach, using a matched-pair controlled study design, to assess whether the use of the robot made it more likely for the acetabular cup to be positioned in the safe zones described by Lewinnek et al. and Callanan et al. Methods Between September 2008 and September 2012, 160 THAs were performed by the senior surgeon. Sixty-two patients (38.8%) underwent THA using a conventional posterior approach, 69 (43.1%) underwent robotic-assisted THA using the posterior approach, and 29 (18.1%) underwent radiographic-guided anterior-approach THAs. From September 2008 to June 2011, all patients were offered anterior or posterior approaches regardless of BMI and anatomy. Since introduction of the robot in June 2011, all THAs were performed using the robotic technique through the posterior approach, unless a patient specifically requested otherwise. The radiographic cup positioning of the robotic-assisted THAs was compared with a matched-pair control group of conventional THAs performed by the same surgeon through the same posterior approach. The safe zone (inclination, 30°–50°; anteversion, 5°–25°) described by Lewinnek et al. and the modified safe zone (inclination, 30°–45°; anteversion, 5°–25°) of Callanan et al. were used for cup placement assessment. Matching criteria were gender, age ± 5 years, and (BMI) ± 7 units. After exclusions, a total of 50 THAs were included in each group. Strong interobserver and intraobserver correlations were found for all radiographic measurements (r > 0.82; p < 0.001). Results One hundred percent (50/50) of the robotic-assisted THAs were within the safe zone described by Lewinnek et al. compared with 80% (40/50) of the conventional THAs (p = 0.001). Ninety-two percent (46/50) of robotic-assisted THAs were within the modified safe zone described by Callanan et al. compared with 62% (31/50) of conventional THAs p (p = 0.001). The odds ratios for an implanted cup out of the safe zones of Lewinnek et al. and Callanan et al. were zero and 0.142, respectively (95% CI, 0.044, 0.457). Conclusions Use of the robot allowed for improvement in placement of the cup in both safe zones, an important parameter that plays a significant role in long-term success of THA. However, whether the radiographic improvements we observed will translate into clinical benefits for patients—such as reductions in component impingement, acetabular wear, and prosthetic dislocations, or in terms of improved longevity—remains unproven. Level of Evidence Level III, therapeutic study. See the Instructions for Authors for a complete description of levels of evidence.

Background Computer-assisted surgery (CAS) for cup placement has been developed to improve the functional results and to reduce the dislocation rate and wear after total hip arthroplasty (THA). Previously published studies demonstrated radiographic benefits of CAS in terms of implant position, but whether these improvements result in clinically important differences that patients might perceive remains largely unknown. Questions/purposes We hypothesized that THA performed with CAS would improve 10-year patient-reported outcomes measured by validated scoring tools, reduce acetabular polyethylene wear as measured using a validated radiological method, and increase survivorship. Methods Sixty patients operated on for a THA between April 2004 and April 2005 were randomized into two groups using either the CAS technique or a conventional technique for cup placement. All patient candidates for a THA with the diagnosis of primary arthritis or avascular necrosis were eligible for the CAS procedure and randomly assigned to the CAS group by the Hospital Informatics Department with use of a systematic sampling method. The patients assigned to the freehand cup placement group were matched for sex, age within 5 years, pathological condition, operatively treated side, and body mass index within 3 points. All patients were operated on through an anterolateral approach (patient in the supine position) using cementless implants. In the CAS group, a specific surgical procedure using an imageless cup positioning computer-based navigation system was performed. There were 16 men and 14 women in each group; mean age was 62 years (range, 24–80 years), and mean body mass index was 25 ± 3 kg/m 2 . No patient was lost to followup at 10 years, but five patients have died (two in the CAS group and three in the control group). At the 10-year followup, an independent observer blinded to the type of technique performed patients’ evaluation. Cup positioning was evaluated postoperatively using a CT scan in the two groups with results previously published. At 10 years, we assessed subjective functional outcome and quality of life using validated questionnaires (SF-12, Harris hip score [HHS], Hip injury and Osteoarthritis Outcome Score). Wear rate was then evaluated on standardized radiographs using a previously validated semiautomated computer analogic measurement method (dual circle method). Complications and survivorship were compared between groups. With our available sample size, this study had 80% power to detect a difference of 4 points out of 100 on the HHS at the p < 0.05 level. Results With the numbers available, we found we found no differences between groups regarding HSS at last followup 95.3 ± 5.9 points (CAS group) versus 96.2 ± 4.5 points, a mean difference of 0.9 points (95% confidence interval [CI], −4.3 to 4.6; p = 0.6). There was no difference between the groups in terms of the mean (± SD) acetabular linear wear at 10 years. The mean wear was 0.71 ± 0.6 mm in the CAS group versus 0.77 ± 0.52 mm in the control group, a mean difference of 0.06 mm (95% CI, −0.1 to 0.2; p = 0.54). With the numbers available, there was no difference between the CAS group and the conventional THA groups in terms of survivorship free from aseptic loosening (100%; 95% CI, 100%–95%, versus 100%; 95% CI, 100%–94%; p = 0.3). Conclusions Our observations suggest that CAS used for cup placement does not confer any substantial advantage in function, wear rate, or survivorship at 10 years after THA. Because CAS is associated with added costs and surgical time, future studies need to identify what clinically relevant advantages it offers, if any, to justify its continued use in THA. Level of Evidence Level II, therapeutic study.

Background Delayed gadolinium-enhanced MRI of cartilage (dGEMRIC) allows an objective, noninvasive, and longitudinal quantification of biochemical cartilage properties. Although dGEMRIC has been used to monitor the course of cartilage degeneration after periacetabular osteotomy (PAO) for correction of hip dysplasia, such longitudinal data are currently lacking for femoroacetabular impingement (FAI). Questions/purposes (1) How does the mean acetabular and femoral dGEMRIC index change after surgery for FAI at 1-year followup compared with a similar group of patients with FAI treated without surgery? (2) Does the regional distribution of the acetabular and femoral dGEMRIC index change for the two groups over time? (3) Is there a correlation between the baseline dGEMRIC index and the change of patient-reported outcome measures (PROMs) at 1-year followup? (4) Among those treated surgically, can dGEMRIC indices distinguish between intact and degenerated cartilage? Methods We performed a prospective, comparative, nonrandomized, longitudinal study. At the time of enrollment, the patients’ decision whether to undergo surgery or choose nonoperative treatment was not made yet. Thirty-nine patients (40 hips) who underwent either joint-preserving surgery for FAI (20 hips) or nonoperative treatment (20 hips) were included. The two groups did not differ regarding Tönnis osteoarthritis score, preoperative PROMs, or baseline dGEMRIC indices. There were more women (60% versus 30%, p = 0.003) in the nonoperative group and patients were older (36 ± 8 years versus 30 ± 8 years, p = 0.026) and had lower alpha angles (65° ± 10° versus 73° ± 12°, p = 0.022) compared with the operative group. We used a 3.0-T scanner and a three-dimensional dual flip-angle gradient-echo technique for the dGEMRIC technique for the baseline and the 1-year followup measurements. dGEMRIC indices of femoral and acetabular cartilage were measured separately on the initial and followup radial dGEMRIC reformats in direct comparison with morphologic radial images. Regions of interest were placed manually peripherally and centrally within the cartilage based on anatomic landmarks at the clockface positions. The WOMAC, the Hip disability and Osteoarthritis Outcome Score, and the modified Harris hip score were used as PROMs. Among those treated surgically, the intraoperative damage according to the Beck grading was recorded and compared with the baseline dGEMRIC indices. Results Although both the operative and the nonoperative groups experienced decreased dGEMRIC indices, the declines were more pronounced in the operative group (−96 ± 112 ms versus −16 ± 101 ms on the acetabular side and −96 ± 123 ms versus −21 ± 83 ms on the femoral side in the operative and nonoperative groups, respectively; p < 0.001 for both). Patients undergoing hip arthroscopy and surgical hip dislocation experienced decreased dGEMRIC indices; the decline in femoral dGEMRIC indices was more pronounced in hips after surgical hip dislocation (−120 ± 137 ms versus −61 ± 89 ms, p = 0.002). In the operative group a decline in dGEMRIC indices was observed in 43 of 44 regions over time. In the nonoperative group a decline in dGEMRIC indices was observed in four of 44 regions over time. The strongest correlation among patients treated surgically was found between the change in WOMAC and baseline dGEMRIC indices for the entire joint (R = 0.788, p < 0.001). Among those treated nonoperatively, no correlation between baseline dGEMRIC indices and change in PROMs was found. In the posterosuperior quadrant, the dGEMRIC index was higher for patients with intact cartilage compared with hips with chondral lesions (592 ± 203 ms versus 444 ± 205 ms, p < 0.001). Conclusions We found a decline in acetabular, femoral, and regional dGEMRIC indices for the surgically treated group at 1-year followup despite an improvement in all PROMs. We observed a similar but less pronounced decrease in the dGEMRIC index in symptomatic patients without surgical treatment indicating continuous cartilage degeneration. Although treatment of FAI is intended to alter the forces acting across the hip by eliminating impingement, its effects on cartilage biology are not clear. dGEMRIC provides a noninvasive method of assessing these effects. Longer term studies will be needed to determine whether the matrix changes of the bradytrophic cartilage seen here are permanent or clinically important. Level of Evidence Level II, therapeutic study.

Background Complicated acetabular fractures comprise the most challenging field for orthopedists. The purpose of this study was to develop three-dimensional printed patient-specific (3DPPS) Ti-6Al-4 V plates to treat complicated acetabular fractures involving quadrilateral plate (QLP) disruption and to evaluate their efficacy. Methods Fifty patients with acetabular fractures involving QLP disruption were selected between January 2016 and June 2017. Patients were divided into a control group (Group A, 35 patients) and an experimental group (Group B, 15 patients), and were treated by the conventional method of shaping reconstruction plates or with 3DPPS Ti-6AL-4 V plates, respectively. The efficacy of Ti-6AL-4 V plates was evaluated by blood loss, operative time, reduction quality, postoperative residual displacement, and complications. Results The operative time and blood loss in Group B were reduced compared to Group A, and the difference was statistically significant ( P  < 0.05). There was no significant difference in reduction quality between the two groups ( P  > 0.05). Reduction quality in Group B was anatomic in 10 (66.7%), satisfactory in four (26.7%), and poor in one (6.7%). In Group A, they were anatomic in 18 (51.4%), satisfactory in 13 (37.1%), and poor in four (11.4%). Residual displacement in Group B was less than that in Group A, and the difference was statistically significant ( P  < 0.05). In Group B, one case exhibited loosening of the pubic screw postoperatively. In Group A, there was one case of wound infection, one of deep vein thrombosis (DVT) in the ipsilateral lower limb, one case of traumatic arthritis and two obturator nerve injuries. Conclusions The 3DPPS Ti-6AL-4 V plate is a feasible, accurate and effective implant for acetabular fracture treatment.

Introduction The purpose of this article is to study whether the newly designed whole-process total hip arthroplasty (THA) robotic arm can improve the accuracy of prosthesis placement in THA. Method In this study, 72 patients undergoing THA were prospectively included and randomly divided into two groups. The experimental group was treated with THA assisted by a newly designed robotic arm. The control group received THA with conventional surgical methods. The imaging data were compared after operation. Result Compared with the conventional operation, the whole-process robotic arm can more accurately place the acetabular prosthesis in the anteversion safe zone of 5 ~ 25°, but in terms of the inclination angle, whether the reference is the safe zone of 30 ~ 50° or 30 ~ 45°, there is no statistical difference between the two groups. The average lower limb length discrepancy (LLLD) in the experimental group was 3.77 ± 8.31 mm longer than contralateral side, while the counterpart in the control group was 8.39 ± 9.11 mm, with significant difference ( P  = 0.029). The femoral prosthesis was fixed in neutral position in 35 (100%) cases in the experimental group and only 30 (83.3%) in the control group ( P  = 0.036). There was no significant difference in the recovery of hip offset, femoral anteversion, and canal fill ratio (CFR) between the two groups. Conclusion Robotic arm can improve the accuracy of anteversion of acetabular cup, restore the consistency of the length of lower limbs, and more accurately implant the femoral prosthesis to the neutral position in the coronal position. Clinical trial registration number ChiCTR2100044124 (date of registration: 2021–3-11).

Purpose Management of quadrilateral plate fractures is technically demanding and requires specific fixation techniques. Infra-pectineal plating is the gold standard method of fixation. However, we recorded a high incidence of medial wall displacement and reoperations. Therefore, the aim of our study was to identify whether supra-pectineal quadrilateral buttress plating provides much more rigid fixation with a better functional and radiological outcome or not. Patients and Methods The authors conducted this prospective, randomized control, single-blinded study at a level 1 single trauma centre. Between March 2022 and June 2023, 34 patients with quadrilateral plate fractures had anterior fixation, either via the anatomical QLP (17 cases) or infra-pectineal plating (17 cases) (Groups A and B, respectively). The radiological and clinical outcomes, as well as residual medial wall displacement, were the primary outcomes. Results The mean follow-up was 14.47 months in group A and 15.24 months in group B. In group A, the mean operative time ( p  = 0.02) was shorter, and the mean blood loss ( p  < 0.001) was significantly lower. However last follow-up showed no statistically significant differences as regards residual medial wall displacement ( p  = 1.0), final radiological ( p  = 0.86), and clinical outcomes ( p  = 1.0). Conclusion Authors concluded that the anatomical QLP made it easier to reduce and fix acetabular fractures with a displaced medial wall. This was done by using multidirectional screws in the posterior column through its infra-pectineal extension and a strong screw purchase aimed at the posterior column through its supra-pectineal part . The two groups were similar in terms of final radiological and clinical outcomes, as well as residual medial wall displacement rates. However, the QLP had less morbidity than the classic infra-pectineal plating (shorter operation time and less blood loss).

Background High blood loss results in major complications in pelvic and acetabular surgeries. Decrement of blood loss during and after surgery reduces morbidity and mortality of the patients. Clonidine is an antihypertensive alpha-2 agonist that has been shown to reduce blood loss in different surgeries. This study aims to evaluate the effects of preoperative oral administration of clonidine in patients who underwent surgery for pelvic and acetabulum fractures. Methods A randomized, triple-blinded clinical trial was conducted on 88 patients (79 men and 9 women) scheduled for pelvic or acetabular fracture surgery. Patients were divided into two groups. The intervention group received 200 mcg of oral clonidine 75 to 90 min before anesthesia. Control groups received a placebo with a similar color and shape to clonidine. We compared two groups regarding the blood loss volume, postoperative pain, quality of the surgical visual field, and day one and three postoperative hemoglobin levels. Results Postoperation hemoglobin level was significantly dropped in both groups ( P  < 0.05). Post-surgery, the hemoglobin level difference between the groups increased and became significant by day three (9.8 ± 1.2 Vs. 8.4 ± 1.2, P  = 0.02). The number of patients who required postoperative blood transfusion in the intervention group was less than in the control group (3 vs. 10, P  = 0.03). Preoperative clonidine significantly reduced postoperation pain and improved the quality of the surgeon’s visual field ( P  < 0.001). Conclusions Preoperative oral clonidine administration reduced blood loss and the number of postoperative transfusion units in pelvic and acetabular fracture surgeries. In addition, it improved the surgeon’s visual field quality and reduced postoperative pain.

This study compared the radiologic and clinical outcomes of a new seven-axis robotic-assisted total hip arthroplasty (THA) and conventional THA. Hundred and four patients were randomly assigned to two groups—the robotic-assisted THA group (RAS group) and the conventional THA group (CON group). The preoperative and postoperative Harris Hip score (HHS), acetabular inclination, anteversion, femoral offset, and leg length discrepancy (LLD) were compared. During the follow-up, no patients had any complications that could be associated with the use of the robot. The proportion of acetabular cups in the safety zone was significantly higher in the RAS group than that in the CON group. The two groups had significantly different mean absolute difference of inclination and anteversion. There was no significant difference in the postoperative HHSs, changes in HHSs, femoral offset, and lower limb length between the two groups. The seven-axis robotic-assisted THA system is safe and effective, and leads to better acetabulum cup positioning compared to conventional THA. The improvements observed in the HHS, LLD, and femoral offset in the RAS group were similar to those in the CON group. Clinical trial registration time : 19/05/2022. Clinical trial registration number : ChiCTR2200060115.

Purpose Virtual reality (VR) training effectiveness in improving hip arthroplasty surgical skills requires further evaluation. We hypothesised VR training could improve accuracy and the time taken by medical students compared to a control group with only video teaching. Methods This single-centre randomized controlled clinical trial collected data from March to June 2023. Surgically naïve volunteer undergraduate medical students performed three sessions on a VR training platform, either cup (VR-Cup=Control-Stem) or stem (VR-Stem=Control-Cup) implantation. The primary outcome was the mean difference between predefined cup inclination (60°) and stem anteversion (20°) compared to the actual implanted values in sawbones between VR and control groups. Secondary outcomes were task completion time and mistake number between the groups. Results A total of 101 students participated (VR-Cup 47, VR-Stem 54). Groups did not significantly differ concerning age ( p = 0.879), gender ( p = 0.408), study year ( p = 0.938), previous VR use ( p = 0.269) and baseline medical and procedural knowledge. The VR-Cup implanted the cup closer to the intended target ( p < 0.001) and faster than the Control-Cup group ( p = 0.113). The VR-Stem implanted the stem closer to the intended target ( p = 0.008) but not faster than the Control-Cup group ( p = 0.661). Stem retroversion was commoner in the Control-Stem than in the VR-Stem group ( p = 0.016). Conclusions VR training resulted in higher rates of accurate procedure completion, reduced time and fewer errors compared to video teaching. VR training is an effective method for improving skill acquisition in THA. Trial registration ClinicalTrials.gov Identifier: NCT05807828

Background. The aim of this study is to retrospectively evaluate the efficacy of 3D navigational template for Salter osteotomy of DDH in children. Methods. Thirty-two consecutive patients with DDH who underwent Salter osteotomy were evaluated between July 2014 and August 2017, and they were divided into the conventional group (n=16) and navigation template group (n=16) according to different surgical methods. The corrective acetabular degrees, radiation exposure, and operation time were compared between the two groups. Results. No nerve palsy or redislocation was reported in the navigation template group. Compared with the conventional group, the navigation template group had the advantages of more accurate acetabular degrees, less radiation exposure, and shorter operation time (P<0.05). Meanwhile, the navigation template group achieved a better surgical outcome than the conventional group (McKay, P=0.0293; Severin, P=0.0949). Conclusions. The 3D navigational template for Salter osteotomy of DDH is simple and effective, which could be an alternative approach to improve the Salter osteotomy accuracy and optimize the efficacy.