Explore the vast range of titles available.

In recent years, the logistics industry is in its full swing. The demand for logistics is increasing throughout the country, and this rising trend will continue during the following decades. With the substantial increase of workloads, traditional manual ways are increasingly unable to meet the new needs of the logistics industry, therefore new production and transportation modes are becoming imperative. Considering this, a new method was proposed to help detect, recognize and calculate the volume of rectangular objects automatically. In this method, a YOLO-based model was firstly applied to detect the object. Secondly, an RGB-D camera was used to obtain the depth information. Finally, after the length, width and height values were estimated from a single surface, the volume of the object can be calculated. Experimental results showed that the method is simpler and more accurate as compared with traditional three-dimensional reconstruction-based methods.

Screening mammography aims to identify breast cancer at earlier stages of the disease, when treatment can be more successful 1 . Despite the existence of screening programmes worldwide, the interpretation of mammograms is affected by high rates of false positives and false negatives 2 . Here we present an artificial intelligence (AI) system that is capable of surpassing human experts in breast cancer prediction. To assess its performance in the clinical setting, we curated a large representative dataset from the UK and a large enriched dataset from the USA. We show an absolute reduction of 5.7% and 1.2% (USA and UK) in false positives and 9.4% and 2.7% in false negatives. We provide evidence of the ability of the system to generalize from the UK to the USA. In an independent study of six radiologists, the AI system outperformed all of the human readers: the area under the receiver operating characteristic curve (AUC-ROC) for the AI system was greater than the AUC-ROC for the average radiologist by an absolute margin of 11.5%. We ran a simulation in which the AI system participated in the double-reading process that is used in the UK, and found that the AI system maintained non-inferior performance and reduced the workload of the second reader by 88%. This robust assessment of the AI system paves the way for clinical trials to improve the accuracy and efficiency of breast cancer screening. An artificial intelligence (AI) system performs as well as or better than radiologists at detecting breast cancer from mammograms, and using a combination of AI and human inputs could help to improve screening efficiency.

Artificial intelligence (AI) has made impressive progress over the past few years, including many applications in medical imaging. Numerous commercial solutions based on AI techniques are now available for sale, forcing radiology practices to learn how to properly assess these tools. While several guidelines describing good practices for conducting and reporting AI-based research in medicine and radiology have been published, fewer efforts have focused on recommendations addressing the key questions to consider when critically assessing AI solutions before purchase. Commercial AI solutions are typically complicated software products, for the evaluation of which many factors are to be considered. In this work, authors from academia and industry have joined efforts to propose a practical framework that will help stakeholders evaluate commercial AI solutions in radiology (the ECLAIR guidelines) and reach an informed decision. Topics to consider in the evaluation include the relevance of the solution from the point of view of each stakeholder, issues regarding performance and validation, usability and integration, regulatory and legal aspects, and financial and support services. Key Points • Numerous commercial solutions based on artificial intelligence techniques are now available for sale, and radiology practices have to learn how to properly assess these tools. • We propose a framework focusing on practical points to consider when assessing an AI solution in medical imaging, allowing all stakeholders to conduct relevant discussions with manufacturers and reach an informed decision as to whether to purchase an AI commercial solution for imaging applications. • Topics to consider in the evaluation include the relevance of the solution from the point of view of each stakeholder, issues regarding performance and validation, usability and integration, regulatory and legal aspects, and financial and support services.

In the shipping industry, especially shipyards which are used for building and repairing ships, a lot of labor is required. Due to a lot of labor, of course, makes the salary component to be a fairly large cost component in the company. Nowadays, many shipyards have turned to outsourcing-based shipyards, to reduce indirect costs. However, other shipyards have not yet become outsourcing-based shipyards, so the number of workers is still relatively large. The high number of permanent workers in a company indicates the effectiveness and efficiency of the workforce in the company is still lacking, so that the company will experience losses because the workload received by each workforce does not match the salary received by the worker. The research was conducted using the Full-Time Equivalent (FTE) method, which the components required for this method are the effective working days in 1 year and the effective working time in 1 year. After the analysis was carried out, the percentage of reduction in labor remained at 55%, and the percentage reduction in indirect costs is 38%.

Histopathological classification of gastric and colonic epithelial tumours is one of the routine pathological diagnosis tasks for pathologists. Computational pathology techniques based on Artificial intelligence (AI) would be of high benefit in easing the ever increasing workloads on pathologists, especially in regions that have shortages in access to pathological diagnosis services. In this study, we trained convolutional neural networks (CNNs) and recurrent neural networks (RNNs) on biopsy histopathology whole-slide images (WSIs) of stomach and colon. The models were trained to classify WSI into adenocarcinoma, adenoma, and non-neoplastic. We evaluated our models on three independent test sets each, achieving area under the curves (AUCs) up to 0.97 and 0.99 for gastric adenocarcinoma and adenoma, respectively, and 0.96 and 0.99 for colonic adenocarcinoma and adenoma respectively. The results demonstrate the generalisation ability of our models and the high promising potential of deployment in a practical histopathological diagnostic workflow system.

Real-world experience is typically multimodal. Evidence indicates that the facilitation in the detection of multisensory stimuli is modulated by the perceptual load, the amount of information involved in the processing of the stimuli. Here, we used a realistic virtual reality environment while concomitantly acquiring Electroencephalography (EEG) and Galvanic Skin Response (GSR) to investigate how multisensory signals impact target detection in two conditions, high and low perceptual load. Different multimodal stimuli (auditory and vibrotactile) were presented, alone or in combination with the visual target. Results showed that only in the high load condition, multisensory stimuli significantly improve performance, compared to visual stimulation alone. Multisensory stimulation also decreases the EEG-based workload. Instead, the perceived workload, according to the “NASA Task Load Index” questionnaire, was reduced only by the trimodal condition (i.e., visual, auditory, tactile). This trimodal stimulation was more effective in enhancing the sense of presence, that is the feeling of being in the virtual environment, compared to the bimodal or unimodal stimulation. Also, we show that in the high load task, the GSR components are higher compared to the low load condition. Finally, the multimodal stimulation (Visual-Audio-Tactile—VAT and Visual-Audio—VA) induced a significant decrease in latency, and a significant increase in the amplitude of the P300 potentials with respect to the unimodal (visual) and visual and tactile bimodal stimulation, suggesting a faster and more effective processing and detection of stimuli if auditory stimulation is included. Overall, these findings provide insights into the relationship between multisensory integration and human behavior and cognition.

The advancement of visual tracking has continuously been brought by deep learning models. Typically, supervised learning is employed to train these models with expensive labeled data. In order to reduce the workload of manual annotation and learn to track arbitrary objects, we propose an unsupervised learning method for visual tracking. The motivation of our unsupervised learning is that a robust tracker should be effective in bidirectional tracking. Specifically, the tracker is able to forward localize a target object in successive frames and backtrace to its initial position in the first frame. Based on such a motivation, in the training process, we measure the consistency between forward and backward trajectories to learn a robust tracker from scratch merely using unlabeled videos. We build our framework on a Siamese correlation filter network, and propose a multi-frame validation scheme and a cost-sensitive loss to facilitate unsupervised learning. Without bells and whistles, the proposed unsupervised tracker achieves the baseline accuracy of classic fully supervised trackers while achieving a real-time speed. Furthermore, our unsupervised framework exhibits a potential in leveraging more unlabeled or weakly labeled data to further improve the tracking accuracy.

In the present work we employ a load balancing scheme involving an adaptive and dynamic workload redistribution both along Space and Time directions for solving Data Assimilation problems where the observations are non-uniformly distributed, general sparse and its distribution changes during the time. We will consider the Constrained Least Square model (CLS) as prototype of Data Assimilation problems and we will validate the proposed approach on different configurations. Validation is performed using Parallel Computing Toolbox of MATLABR2013a on high performance hybrid computing architecture.

PurposeTo study the feasibility of automatically identifying normal digital mammography (DM) exams with artificial intelligence (AI) to reduce the breast cancer screening reading workload.Methods and materialsA total of 2652 DM exams (653 cancer) and interpretations by 101 radiologists were gathered from nine previously performed multi-reader multi-case receiver operating characteristic (MRMC ROC) studies. An AI system was used to obtain a score between 1 and 10 for each exam, representing the likelihood of cancer present. Using all AI scores between 1 and 9 as possible thresholds, the exams were divided into groups of low- and high likelihood of cancer present. It was assumed that, under the pre-selection scenario, only the high-likelihood group would be read by radiologists, while all low-likelihood exams would be reported as normal. The area under the reader-averaged ROC curve (AUC) was calculated for the original evaluations and for the pre-selection scenarios and compared using a non-inferiority hypothesis.ResultsSetting the low/high-likelihood threshold at an AI score of 5 (high likelihood > 5) results in a trade-off of approximately halving (− 47%) the workload to be read by radiologists while excluding 7% of true-positive exams. Using an AI score of 2 as threshold yields a workload reduction of 17% while only excluding 1% of true-positive exams. Pre-selection did not change the average AUC of radiologists (inferior 95% CI > − 0.05) for any threshold except at the extreme AI score of 9.ConclusionIt is possible to automatically pre-select exams using AI to significantly reduce the breast cancer screening reading workload.Key Points• There is potential to use artificial intelligence to automatically reduce the breast cancer screening reading workload by excluding exams with a low likelihood of cancer.• The exclusion of exams with the lowest likelihood of cancer in screening might not change radiologists’ breast cancer detection performance.• When excluding exams with the lowest likelihood of cancer, the decrease in true-positive recalls would be balanced by a simultaneous reduction in false-positive recalls.

Unlike daily routine images, ultrasound images are usually monochrome and low-resolution. In ultrasound images, the cancer regions are usually blurred, vague margin and irregular in shape. Moreover, the features of cancer region are very similar to normal or benign tissues. Therefore, training ultrasound images with original Convolutional Neural Network (CNN) directly is not satisfactory. In our study, inspired by state-of-the-art object detection network Faster R-CNN, we develop a detector which is more suitable for thyroid papillary carcinoma detection in ultrasound images. In order to improve the accuracy of the detection, we add a spatial constrained layer to CNN so that the detector can extract the features of surrounding region in which the cancer regions are residing. In addition, by concatenating the shallow and deep layers of the CNN, the detector can detect blurrier or smaller cancer regions. The experiments demonstrate that the potential of this new methodology can reduce the workload for pathologists and increase the objectivity of diagnoses. We find that 93:5% of papillary thyroid carcinoma regions could be detected automatically while 81:5% of benign and normal tissue could be excluded without the use of any additional immunohistochemical markers or human intervention.