Explore the vast range of titles available.

Driver assistance systems have become a major safety feature of modern passenger vehicles. The advanced driver assistance system (ADAS) is one of the active safety systems to improve the vehicle control performance and, thus, the safety of the driver and the passengers. To use the ADAS for lane change control, rapid and correct detection of the driver’s intention is essential. This study proposes a novel preprocessing algorithm for the ADAS to improve the accuracy in classifying the driver’s intention for lane change by augmenting basic measurements from conventional on-board sensors. The information on the vehicle states and the road surface condition is augmented by using an artificial neural network (ANN) models, and the augmented information is fed to a support vector machine (SVM) to detect the driver’s intention with high accuracy. The feasibility of the developed algorithm was tested through driving simulator experiments. The results show that the classification accuracy for the driver’s intention can be improved by providing an SVM model with sufficient driving information augmented by using ANN models of vehicle dynamics.

Managing tool-wear is an important issue associated with all material removal processes. This paper deals with the application of two nature-inspired computing techniques, namely, artificial neural network (ANN) and (in silico) DNA-based computing (DBC) for managing the tool-wear. Experimental data (images of worn-zone of cutting tool) has been used to train the ANN and, then, to perform the DBC. It is demonstrated that the ANN can predict the degree of tool-wear from a set of tool-wear images processed under a given procedure whereas the DBC can identify the degree of similarity/dissimilar among the processed images. Further study can be carried out while solving other complex problems integrating ANN and DBC where both prediction and pattern-recognition are two important computational problems that need to be solved simultaneously.

Plant diseases are spread by a variety of pests, weeds, and pathogens and may have a devastating effect on agriculture, if not handled in a timely manner. Farmers face umpteen challenges from a proper water supply, untimely rain, storage facilities, and several plant diseases. Crops disease is the primary threat and it causes enormous loss to farmers in terms of production and finance. Identifying the disease from several hectares of agricultural land is a very difficult practice even with the presence of modern technology. Accurate and rapid illness prediction for early illness treatment to crops minimizes economical loss to the individual and further proves to be productive for healthy crops. Many studies use modern deep learning approaches to improve the accuracy and performance of object detection and identification systems. The suggested method notifies farmers of different agricultural illnesses, prompting them to take further essential precautions before the disease spreads to the whole agricultural field. The primary objective of this study is to detect the illnesses as soon as they begin to spread on the leaves of the plants. Super-Resolution Convolutional Neural Network (SRCNN) and Bicubic models are employed in the system to identify healthy and diseased leaves with an accuracy of 99.175 % and 99.156 % respectively.

Reservoir inflow forecasting is crucial for appropriate reservoir management, especially in the flood season. Forecasting for this season must be sufficiently accurate and timely to allow dam managers to release water gradually for flood control in downstream areas. Recently, several models and methodologies have been developed and applied for inflow forecasting, with good results. Nevertheless, most were reported to have weaknesses in capturing the peak flow, especially rare extreme flows. In this study, an analogue-based forecasting method, designated the variation analogue method (VAM), was developed to overcome this weakness. This method, the wavelet artificial neural network (WANN) model, and the weighted mean analogue method (WMAM) were used to forecast the monthly reservoir inflow of the Sirikit Dam, located in the Nan River Basin, one of the eight sub-basins of the Chao Phraya River Basin in Thailand. It is one of four major dams in the Chao Phraya Basin, with a maximum storage of 10.64 km3, which supplies water to 22 provinces in this basin, covering an irrigation area of 1,513,465 hectares. Due to the huge extreme monthly inflow in August, with inflow of more than 3 km3 in 1985 and 2011, monthly or longer lead time inflow forecasting is needed for proper water and flood control management of this dam. The results of forecasting indicate that the WANN model provided good forecasting for whole-year forecasting including both low-flow and high-flow patterns, while the WMAM model provided only satisfactory results. The VAM showed the best forecasting performance and captured the extreme inflow of the Sirikit Dam well. For the high-flow period (July–September), the WANN model provided only satisfactory results, while those of the WMAM were markedly poorer than for the whole year. The VAM showed the best capture of flow in this period, especially for extreme flow conditions that the WANN and WMAM models could not capture.

As an important part of modern marine monitoring systems, ship target identification has important significance in maintaining marine rights and monitoring maritime traffic. With the development of artificial intelligence technology, image detection and recognition based on deep learning methods have become the most popular and practical method. In this paper, two deep learning algorithms, the Mask R-CNN algorithm and the Faster R-CNN algorithm, are used to build ship target feature extraction and recognition models based on deep convolutional neural networks. The established models were compared and analyzed to verify the feasibility of target detection algorithms. In this study, 5748 remote sensing maps were selected as the dataset for experiments, and two algorithms were used to classify and extract warships and civilian ships. Experiments showed that for the accuracy of ship identification, Mask R-CNN and Faster R-CNN reached 95.21% and 92.76%, respectively. These results demonstrated that the Mask R-CNN algorithm achieves pixel-level segmentation. Compared with the Faster R-CNN algorithm, the obtained target detection effect is more accurate, and the performance in target detection and classification is better, which reflects the great advantage of pixel-level recognition.

The manufacturing processes and design of metal and alloy products can be performed over a wide range of strain rates and temperatures. To design and optimize these processes using computational mechanics tools, the selection and calibration of the constitutive models is critical. In the case of hazardous and explosive impact loads, it is not always possible to test material properties. For this purpose, this paper assesses the efficiency and the accuracy of different architectures of ANNs for the identification of the Johnson–Cook material model parameters. The implemented computational tool of an ANN-based parameter identification strategy provides adequate results in a range of strain rates required for general manufacturing and product design applications. Four ANN architectures are studied to find the most suitable configuration for a reduced amount of experimental data, particularly for cases where high-impact testing is constrained. The different ANN structures are evaluated based on the model’s predictive capability, revealing that the perceptron-based network of 66 inputs and one hidden layer of 30 neurons provides the highest prediction accuracy of the effective flow stress–strain behavior of Ti64 alloy and three virtual materials.

Monitoring shoreline change is one of the essential tasks for sustainable coastal zone management. Due to its wide coverage and relatively high spatiotemporal monitoring resolutions, satellite imagery based on synthetic aperture radar (SAR) is considered a promising data source for shoreline monitoring. In this study, we developed a robust shoreline detection method based on satellite SAR imagery using an artificial neural network (NN). The method uses the feedforward NN to classify the pixels of SAR imagery into two categories, land and sea. The shoreline location is then determined as a boundary of these two groups of classified pixels. To enhance the performance of the present NN for land–sea classification, we introduced two different approaches in the settings of the input layer that account not only for the local characteristics of pixels but also for the spatial pixel patterns with a certain distance from the target pixel. Two different approaches were tested against SAR images, which were not used for model training, and the results showed classification accuracies higher than 95% in most SAR images. The extracted shorelines were compared with those obtained from eye detection. We found that the root mean square errors of the shoreline position were generally less than around 15 m. The developed method was further applied to two long coasts. The relatively high accuracy and low computational cost support the advantages of the present method for shoreline detection and monitoring. It should also be highlighted that the present method is calibration-free, and has robust applicability to the shoreline with arbitrary angles and profiles.

In this paper, we applied an artificial neural network (ANN) to the short-term prediction of the Arctic sea ice concentration (SIC). The prediction was performed using encoding and decoding processes, in which a gated recurrent unit encodes sequential sea ice data, and a feed-forward neural network model decodes the encoded input data. Because of the large volume of Arctic sea ice data, the ANN predicts the future SIC of each cell individually. The limitation of these singular predictions is that they do not use information from other cells. This results in low accuracy, particularly when there are drastic changes during melting and freezing seasons. To address this issue, we present a new data scheme including global and local SIC information, where the global information is represented by sea ice statistics. We trained ANNs using different data schemes and network architectures, and then compared their performances quantitatively and visually. The results show that, compared with a data scheme that uses only local sea ice information, the newly proposed scheme leads to a significant improvement in prediction accuracy.

Multiple linear regressions are an important tool used to find the relationship between a set of variables used in various scientific experiments. In this article we are going to introduce a simple method of solving a multiple rectilinear regressions (MLR) problem that uses an artificial neural network to find the accurate and expected output from MLR problem. Different artificial neural network (ANN) types with different architecture will be tested, the error between the target outputs and the calculated ANN outputs will be investigated. A recommendation of using a certain type of ANN based on the experimental results will be raised.

Accurate quantification of the terrestrial water cycle relies on combinations of multisource datasets. This analysis uses data from remotely sensed, in-situ, and reanalysis records to quantify the terrestrial water budget/balance and component uncertainties in the upper Chao Phraya River Basin from May 2002 to April 2020. Three closure techniques are applied to merge independent records of water budget components, creating up to 72 probabilistic realizations of the monthly water budget for the upper Chao Phraya River Basin. An artificial neural network (ANN) model is used to gap-fill data in and between GRACE and GRACE-FO-based terrestrial water storage anomalies. The ANN model performed well with r ≥ 0.95, NRMSE = 0.24 − 0.37, and NSE ≥ 0.89 during the calibration and validation phases. The cumulative residual error in the water budget ensemble mean accounts for ~15% of the ensemble mean for both the precipitation and evapotranspiration. An increasing trend of 0.03 mm month−1 in the residual errors may be partially attributable to increases in human activity and the relative redistribution of biases among other water budget variables. All three closure techniques show similar directions of constraints (i.e., wet or dry bias) in water budget variables with slightly different magnitudes. Our quantification of water budget residual errors may help benchmark regional hydroclimate models for understanding the past, present, and future status of water budget components and effectively manage regional water resources, especially during hydroclimate extremes.