Explore the vast range of titles available.

This paper introduces a new method of electricity generation using a Wiegand sensor. The Wiegand sensor consists of a magnetic wire and a pickup coil wound around it. This sensor generates a pulse voltage of approximately 5 V and 20 µs width as an induced voltage in the pickup coil. The aim of this study is to generate a DC voltage of 5 V from the sensor, which is expected to be used as a power source in self-powered devices and battery-less modules. We report on the design and verification of a self-oscillating boost converter circuit in this paper. A DC voltage obtained by rectifying and smoothing the pulse voltage generated from the Wiegand sensor was boosted by the circuit. A stable DC output voltage in the order of 5 V for use as a power supply in electronics modules was successfully obtained. A quantitative analysis of the power generated by the Wiegand sensor revealed a suitable voltage-current range for application in self-powered devices and battery-less modules.

Energy harvesting is a process of extracting energy from surrounding environments. The extracted energy is stored in the supply power for various applications like wearable, wireless sensor, and internet of thing (IoT) applications. The electricity generation using conventional approaches is very costly and causes more pollution in the environmental surroundings. In this manuscript, an energy-efficient, self-powered battery-less piezoelectric-based energy harvester (PE-EH) system is modeled using maximum power point tracking (MPPT) module. The MPPT is used to track the optimal voltage generated by the piezoelectric (PE) sensor and stored across the capacitor. The proposed PE system is self-operated without additional microarchitecture to harvest the Power. The experimental simulation results for the overall PE-EH systems are analyzed for different frequency ranges with variable input source vibrations. The optimal voltage storage across the storing capacitor varies from 1.12 to 1.6 V. The PE-EH system can harvest power up to 86 µW without using any voltage source and is suitable for low-power applications. The proposed PE-EH module is compared with the existing similar EH system with better improvement in harvested power.