Explore the vast range of titles available.

Bird strike, volcanic rock, hailstones, micrometeoroids, or space debris can cause damage to aircraft and space vehicles, therefore their composite materials must have high impact resistance to maximize safety. In a 55% wt. CaCO3 compression molded short glass fiber polyester GFRP-BMC (bulk molded compound), shortening the nominal 6.4 mm fiber length formulation, by 30 min extended mixing, to 0.44 mm was found to increase Charpy impact values, auc, without a change in the compression molding equipment. Specimens were cut from square panels in a spiral configuration in conformity with ASTM D 6110-02 for orthotropic panels, the flow direction approximately radially outward from the charge. At a median-fracture probability of Pf = 0.50, extended mixing improved auc by 29%, from 7.43 to 9.59 kJm−2, and for each solidification texture angle, namely, 0 to 90 (random), 71, 45 and 18 deg, the auc increased by 25% (6.26 to 7.86 kJm−2), 18% (9.36 to 11.07 kJm−2), 35% (7.68 to 10.37 kJm−2), and 20% (6.96 to 8.36 kJm−2), respectively. This strengthening can be explained by an increased number of thermal compressive stress sites between the glass fiber and matrix due to a difference in the coefficient of thermal expansion (CTE) during cool-down, and shrinkage, with an increased number of spaces between fibers, |Sf| from 217 to approximately 2950 per mm3, enhancing impact energy.

Background Circos is a Perl language based software package for visualizing similarities and differences of genome structure and positional relationships between genomic intervals. Running Circos requires extra data processing procedures to prepare plot data files and configure files from datasets, which limits its capability of integrating directly with other software tools such as R. Recently published R Bioconductor package ggbio provides a function to display genomic data in circular layout based on multiple other packages, which increases its complexity of usage and decreased the flexibility in integrating with other R pipelines. Results We implemented an R package, RCircos, using only R packages that come with R base installation. The package supports Circos 2D data track plots such as scatter, line, histogram, heatmap, tile, connectors, links, and text labels. Each plot is implemented with a specific function and input data for all functions are data frames which can be objects read from text files or generated with other R pipelines. Conclusion RCircos package provides a simple and flexible way to make Circos 2D track plots with R and could be easily integrated into other R data processing and graphic manipulation pipelines for presenting large-scale multi-sample genomic research data. It can also serve as a base tool to generate complex Circos images.

The objective of this paper is to examine the sensitivity of fuel moisture to changes in temperature and precipitation and explore the implications under a future climate. We use the Canadian Forest Fire Weather Index System components to represent the moisture content of fine surface fuels (Fine Fuel Moisture Code, FFMC), upper forest floor (duff) layers (Duff Moisture Code, DMC) and deep organic soils (Drought Code, DC). We obtained weather data from 12 stations across Canada for the fire season during the 1971–2000 period and with these data we created a set of modified weather streams from the original data by varying the daily temperatures by 0 to +5 °C in increments of 1 °C and the daily precipitation from −40 to 40 % in increments of 10 %. The fuel moistures were calculated for all the temperature and precipitation combinations. When temperature increases we find that for every degree of warming, precipitation has to increase by more than 15 % for FFMC, about 10 % for DMC and about 5 % for DC to compensate for the drying caused by warmer temperatures. Also, we find in terms of the number of days equal to or above an FFMC of 91, a critical value for fire spread, that no increase in precipitation amount alone could compensate for a temperature increase of 1 °C. Results from three General Circulation Models (GCMs) and three emission scenarios suggest that this sensitivity to temperature increases will result in a future with drier fuels and a higher frequency of extreme fire weather days.

Background Establishing the effectiveness of patient decision aids (PtDA) requires evidence that PtDAs improve the quality of the decision-making process and the quality of the choice made, or decision quality . The aim of this paper is to review the theoretical and empirical evidence for PtDA effectiveness and discuss emerging practical and research issues in the measurement of effectiveness. Methods This updated overview incorporates: a) an examination of the instruments used to measure five key decision-making process constructs (i.e., recognize decision, feel informed about options and outcomes, feel clear about goals and preferences, discuss goals and preferences with health care provider, and be involved in decisions) and decision quality constructs (i.e., knowledge, realistic expectations, values-choice agreement) within the 86 trials in the Cochrane review; and b) a summary of the 2011 Cochrane Collaboration’s review of PtDAs for these key constructs. Data on the constructs and instruments used were extracted independently by two authors from the 86 trials and any disagreements were resolved by discussion, with adjudication by a third party where required. Results The 86 studies provide considerable evidence that PtDAs improve the decision-making process and decision quality. A majority of the studies (76/86; 88%) measured at least one of the key decision-making process or decision quality constructs. Seventeen different measurement instruments were used to measure decision-making process constructs, but no single instrument covered all five constructs. The Decisional Conflict Scale was most commonly used (n = 47), followed by the Control Preference Scale (n = 9). Many studies reported one or more constructs of decision quality, including knowledge (n = 59), realistic expectation of risks and benefits (n = 21), and values-choice agreement (n = 13). There was considerable variability in how values-choice agreement was defined and determined. No study reported on all key decision-making process and decision quality constructs. Conclusions Evidence of PtDA effectiveness in improving the quality of the decision-making process and decision quality is strong and growing. There is not, however, consensus or standardization of measurement for either the decision-making process or decision quality. Additional work is needed to develop and evaluate measurement instruments and further explore theoretical issues to advance future research on PtDA effectiveness.

The aim of this in vitro study was to evaluate the hardness and shrinkage stress (SS) of six bulk-fill resin composites. To evaluate microhardness (MH), ten 6 mm specimens were prepared using a metal mold for each selected bulk-fill resin composite and irradiated from the top side for 40 s using an LED light. After 24 h of storage, Vickers MH was evaluated on the upper, lower and lateral sides of the specimens. SS evaluation was then performed with a universal machine, which evaluated the contraction force generated by a bulk-fill composite specimen placed between two metal cylinders during and after light curing. The results were evaluated with a one-way ANOVA test with a post-hoc Bonferroni test and linear regression analysis (p < 0.05). All materials showed a significant MH decrease between the top and bottom surfaces. However, the bulk-fill materials tested performed differently when considering lateral depth progression. ANOVA tests for SS evaluation showed that both SDR and Venus Bulk Fill had significantly lower stress during irradiation than other tested materials. Further, MH decrease became significantly lower from the top surface at different depths in each tested group. Among the different resins, Venus Bulk Fill and SDR showed not only inferior hardness, but also a significant reduction in SS.

Bulk Moulding Compounds (BMC’s) are short fibre reinforced polymer composites that behave, during their forming, as concentrated fibre suspensions. Their suspending fluid is also a concentrated granular suspension made up of the polymer filled with mineral fillers. In this work, a method is proposed to model their flow. Firstly, the rheology of an industrial BMC was analysed by performing two types of mechanical tests, i.e. lubricated simple and plane strain compression experiments. Experimental results underline the roles of the current strain, the strain rate as well as the mechanical loading on the rheology of the BMC. Secondly, a 3D tensorial rheological model is proposed to reproduce the simple and plane strain compression experiments. Then this model is implemented into a Finite Element code dedicated to the simulation of compression moulding. Simulation results are finally compared with experiments achieved with rather complex flow situations.

High-performance discontinuous carbon-fiber-reinforced thermoplastics (CFRTPs) offer promising manufacturing flexibility and recyclability for advanced composite applications. However, their mechanical performance and reliability strongly depend on the internal fiber architecture, which is largely determined by the molding process. In this study, three distinct compression molding approaches—CFRTP sheet molding compounds (SMCs), bulk molding compounds (BMCs), and free-edge molding compounds (FMCs)—were systematically evaluated to investigate how processing parameters affect fiber orientation, tape deformation, and impregnation quality. X-ray micro-computed tomography (XCT) was employed to visualize and quantify the internal structures of each material, focusing on the visualization and quantification of in-plane and out-of-plane fiber alignment and other internal structure features. The results indicate that CFRTP-SMC retains largely intact tape layers and achieves better impregnation, leading to more uniform and predictable internal geometry. Although CFRTP-BMC exhibits greater tape deformation and splitting due to increased flow, its simpler molding process and better tolerance for tape shape distortion suggest potential advantages for recycled applications. In contrast, CFRTP-FMC shows significant tape fragmentation and poor impregnation, particularly near free edges. These findings underscore the critical role of a controlled molding process in achieving a consistent internal structure for these materials for the first time. This study highlights the utility of advanced XCT methods for optimizing process design and advancing the use of high-performance discontinuous CFRTP in industry.

This study aims to produce novel composite artificial marble materials by bulk molding compound processes, and improve their thermal and mechanical properties. We employed stearic acid as an efficient surface modifying agent for CaCO3 particles, and for the first time, a pretreated, recycled, polyethylene terephthalate (PET) fibers mat is used to reinforce the artificial marble materials. The innovative aspects of the study are the surface treatment of CaCO3 particles by stearic acid. Stearic acid forms a monolayer shell, coating the CaCO3 particles, which enhances the compatibility between the CaCO3 particles and the matrix of the composite. The morphology of the composites, observed by scanning electron microscopy, revealed that the CaCO3 phase was homogeneously dispersed in the epoxy matrix under the support of stearic acid. A single layer of a recycled PET fibers mat was pretreated and designed in the core of the composite. As expected, these results indicated that the fibers could enhance flexural properties, and impact strength along with thermal stability for the composites. This combination of a pretreated, recycled, PET fibers mat and epoxy/CaCO3-stearic acid could produce novel artificial marble materials for construction applications able to meet environmental requirements.

It is vital to maximize the safety of outdoor constructions, airplanes, and space vehicles by protecting against the impact of airborne debris from increasing winds due to climate change, or from bird strikes or micrometeoroids. In a widely-used compression-molded short glass fiber polyester bulk-molded compound (SGFRP-BMC) with 55% wt. CaCO3 filler, the center of the mother panel has lower impact strength than the outer sections with solidification texture angles and short glass fiber (SGF) orientations being random from 0 to 90 degrees. Therefore, a new double-step process of: (1) reducing commercial fiber length without change in molding equipment; followed by a (2) 0.86 MGy dose of homogeneous low-voltage electron beam irradiation (HLEBI) to both sides of the finished samples requiring no chemicals or additives, which is shown to increase the Charpy impact value (auc) about 50% from 6.26 to 9.59 kJm−2 at median-accumulative probability of fracture, Pf = 0.500. Shortening the SGFs results in higher fiber spacing density, Sf, as the thermal compressive stress site proliferation by action of the CTE difference between the matrix and SGF while the composite cools and shrinks. To boost impact strength further, HLEBI provides additional nano-compressive stresses by generating dangling bonds (DBs) creating repulsive forces while increasing SGF/matrix adhesion. Increased internal cracking apparently occurs, raising the auc.

In this research, the bulk density homogenization and impact initiation characteristics of porous PTFE/Al/W reactive materials were investigated. Cold isostatic pressed (CIPed) and hot temperature sintered (HTSed) PTFE/Al/W reactive materials of five different theoretical maximum densities were fabricated via the mixing/pressing/sintering process. Mesoscale structure characteristics of the materials fabricated under different molding pressures were compared while the effect of molding pressures on material bulk densities was analyzed as well. By using the drop weight testing system, effects of the theoretical maximum densities (TMDs), drop heights and molding pressures on the impact initiation characteristics were studied. Quantitatively, characteristic drop heights (H50) for different types of materials were obtained. The two most significant findings of this research are the density homogenization zone and the sensitivity transition zone, which would provide meaningful guides for further design and fabrication of reactive materials.