Explore the vast range of titles available.

Owing to the flexible architectures of deep convolutional neural networks (CNNs) are successfully used for image denoising. However, they suffer from the following drawbacks: (i) deep network architecture is very difficult to train. (ii) Deeper networks face the challenge of performance saturation. In this study, the authors propose a novel method called enhanced convolutional neural denoising network (ECNDNet). Specifically, they use residual learning and batch normalisation techniques to address the problem of training difficulties and accelerate the convergence of the network. In addition, dilated convolutions are used in the proposed network to enlarge the context information and reduce the computational cost. Extensive experiments demonstrate that the ECNDNet outperforms the state-of-the-art methods for image denoising.

Analysis of microarray data is a highly challenging problem due to the inherent complexity in the nature of the data associated with higher dimensionality, smaller sample size, imbalanced number of classes, noisy data-structure, and higher variance of feature values. This has led to lesser classification accuracy and over-fitting problem. In this work, the authors aimed to develop a deep feedforward method to classify the given microarray cancer data into a set of classes for subsequent diagnosis purposes. They have used a 7-layer deep neural network architecture having various parameters for each dataset. The small sample size and dimensionality problems are addressed by considering a well-known dimensionality reduction technique namely principal component analysis. The feature values are scaled using the Min–Max approach and the proposed approach is validated on eight standard microarray cancer datasets. To measure the loss, a binary cross-entropy is used and adaptive moment estimation is considered for optimisation. The performance of the proposed approach is evaluated using classification accuracy, precision, recall, f-measure, log-loss, receiver operating characteristic curve, and confusion matrix. A comparative analysis with state-of-the-art methods is carried out and the performance of the proposed approach exhibit better performance than many of the existing methods.

Precise real-time obstacle recognition is both vital to vehicle automation and extremely resource intensive. Current deep-learning based recognition techniques generally reach high recognition accuracy, but require extensive processing power. This study proposes a region of interest extraction method based on the maximum difference method and morphology, and a target recognition solution created with a deep convolutional neural network. In the proposed solution, the central processing unit and graphics processing unit work collaboratively. Compared with traditional deep learning solutions, the proposed solution decreases the complexity of algorithm, and improves both calculation efficiency and recognition accuracy. Overall it achieves a good balance between accuracy and computation.

Deregulation exposes the inherent volatility of the electricity price. Accurate electricity price forecasting (EPF) could help the market participants to hedge against the price movements and maximise their profits. The existing methods have limited capability of integrating other external factors into the forecasting model, such as weather, electricity consumption and natural gas price. This study proposes a deep recurrent neural network (DRNN) method to forecast day-ahead electricity price in a deregulated electricity market to explore the complex dependence structure of the multivariate EPF model. The proposed method can learn the indirect relationship between electricity price and external factors through its efficient diverse function and multi-layer structure. The effectiveness of the method is validated using data from the New England electricity market. Compared with the up-to-date techniques, the proposed DRNN outperforms the single support vector machine (SVM) by 29.71%, and the improved hybrid SVM network by 21.04% in terms of mean absolute percentage error.

Achieving good recognition results for License plates is challenging due to multiple adverse factors. For instance, in Malaysia, where private vehicle (e.g., cars) have numbers with dark background, while public vehicle (taxis/cabs) have numbers with white background. To reduce the complexity of the problem, we propose to classify the above two types of images such that one can choose an appropriate method to achieve better results. Therefore, in this work, we explore the combination of Convolutional Neural Networks (CNN) and Recurrent Neural Networks namely, BLSTM (Bi-Directional Long Short Term Memory), for recognition. The CNN has been used for feature extraction as it has high discriminative ability, at the same time, BLSTM has the ability to extract context information based on the past information. For classification, we propose Dense Cluster based Voting (DCV), which separates foreground and background for successful classification of private and public. Experimental results on live data given by MIMOS, which is funded by Malaysian Government and the standard dataset UCSD show that the proposed classification outperforms the existing methods. In addition, the recognition results show that the recognition performance improves significantly after classification compared to before classification.

The performance of a photovoltaic system is subject to varying environmental conditions, and it becomes more challenging to track the maximum power point (MPP) and maintain the optimal performance when partial shading occurs. In this study, an enhanced MPP tracking (MPPT) method is proposed utilising the state estimation by the sequential Monte–Carlo (SMC) filtering, which is assisted by the prediction of MPP via an artificial neural network (ANN). A state-space model for the sequential estimation of MPP is proposed in the framework of incremental conductance MPPT approach, and the ANN model based on the observed voltage and current or irradiance data predicts the global MPP to refine the estimation by SMC. Moreover, a quick irradiance change detection method is applied, such that the SMC-based MPPT method resorts to the assistance from ANN only when partial shading is detected. Simulation results show that the proposed enhanced MPPT method achieves high efficiency and is robust to rapid irradiance change.

Classical radial basis function network (RBFN) is widely used to process the non-linear separable data sets with the introduction of activation functions. However, the setting of parameters for activation functions is random and the distribution of patterns is not taken into account. To process this issue, some scholars introduce the kernel clustering into the RBFN so that the clustering results are related to the parameters about activation functions. On the base of the original kernel clustering, this study further discusses the influence of kernel clustering on an RBFN when the setting of kernel clustering is changing. The changing involves different kernel-clustering ways [bubble sort (BS) and escape nearest outlier (ENO)], multiple kernel-clustering criteria (static and dynamic) etc. Experimental results validate that with the consideration of distribution of patterns and the changes of setting of kernel clustering, the performance of an RBFN is improved and is more feasible for corresponding data sets. Moreover, though BS always costs more time than ENO, it still brings more feasible clustering results. Furthermore, dynamic criterion always cost much more time than static one, but kernel number derived from dynamic criterion is fewer than the one from static.

Here, a data mining–driven scheme based on discrete wavelet transform (DWT) is proposed for high impedance fault (HIF) detection in active distribution networks. Correlation between the phase current signal and the related details of the current wavelet transform is presented as a new index for HIF detection. The proposed HIF detection method is implemented in two subsequent stages. In the first stage, the most important features for HIF detection are extracted using support vector machine (SVM) and decision tree (DT). The parameters of SVM are optimised using the genetic algorithm (GA) over the input scenarios. In second stage, SVM is utilised to classify the input data. The efficiency of the utilised SVM-based classifier is compared with a probabilistic neural network (PNN). A comprehensive list of scenarios including load switching, inrush current, solid short-circuit faults, HIF faults in the presence of harmonic loads is generated. The performance of the proposed algorithm is investigated for two active distribution networks including IEEE 13-Bus and IEEE 34-Bus systems.

In this study, a fast object detection algorithm based on binary deep convolution neural networks (CNNs) is proposed. Convolution kernels of different sizes are used to predict classes and bounding boxes of multi-scale objects directly in the last feature map of a deep CNN. In this way, rapid object detection with acceptable precision loss is achieved. In addition, binary quantisation for weight values and input data of each layer is used to squeeze the networks for faster object detection. Compared to full-precision convolution, the proposed binary deep CNNs for object detection results in 62 times faster convolutional operations and 32 times memory saving in theory, what's more, the proposed method is easy to be implemented in embedded computing systems because of the binary operation for convolution and low memory requirement. Experimental results on Pascal VOC2007 validate the effectiveness of the authors’ proposed method.

Prolific integration of renewable energy sources (RESs) such as solar photovoltaic systems into the distribution network will result in various issues associated with their intermittent nature. Energy storage is a vital component for overcoming issues associated with the intermittent nature of such RES. Though stationary battery systems are used as energy storage for such applications, smart energy storage (SES) systems are also becoming popular owing to various advantages and advent of smart grid systems. SES can be achieved by aggregating electric vehicles (EVs) or by using demand response management for loads with large time constants. Aggregated residential refrigerators are potential candidates for creating SES which has virtual storage capacity, unlike EVs. In this study, residential refrigerators are modelled analogously to energy capacity and self-discharge of electro-chemical batteries using the artificial neural network based kWh modelling. The model is further extended to estimate the virtual energy storage (VES) capacity with aggregated residential refrigerators; particularly in high-rise residential buildings. Simulation results are presented for scenarios covering the complete range of thermal capacity of typical refrigerators applicable in Singapore's climatic condition. Furthermore, a brief description of the possible applications for the estimated VES, pertaining to smart grid architecture and cyber-attack is also presented.