Explore the vast range of titles available.

The fourth edition of Implant Restorations: A Step-by-Step Guide provides a wealth of updated and expanded coverage on detailed procedures for restoring dental implants. Focusing on the most common treatment scenarios, it offers concise literature reviews for each chapter and easy-to-follow descriptions of the techniques, along with high-quality clinical photographs demonstrating each step. Comprehensive throughout, this practical guide begins with introductory information on incorporating implant restorative dentistry in clinical practice. It covers diagnosis and treatment planning and digital dentistry, and addresses advances in cone beam computerized tomography (CBCT), treatment planning software, computer generated surgical guides, rapid prototype printing and impression-less implant restorative treatments, intra-oral scanning, laser sintering, and printing/milling polymer materials. Record-keeping, patient compliance, hygiene regimes, and follow-up are also covered. * Provides an accessible step-by-step guide to commonly encountered treatment scenarios, describing procedures and techniques in an easy-to-follow, highly illustrated format * Offers new chapters on diagnosis and treatment planning and digital dentistry * Covers advances in cone beam computerized tomography (CBCT), computer generated surgical guides, intra-oral scanning, laser sintering, and more An excellent and accessible guide on a burgeoning subject in modern dental practice by one of its most experienced clinicians, Implant Restorations: A Step-by-Step Guide, Fourth Edition will appeal to prosthodontists, general dentists, implant surgeons, dental students, dental assistants, hygienists, and dental laboratory technicians.

[This corrects the article DOI: 10.1371/journal.pone.0224734.].

A new species of hermit crab, Pagurus fraserorum n. sp. (family Paguridae) is described from rocky subtidal reefs off KwaZulu-Natal, South Africa, and illustrated using both conventional drawings and colour photographs, and via three-dimensional (3D) X-ray micro-computed tomography ([mu]CT). Because of the limitation [mu]CT has in detecting very fine and soft structures, a novel approach of manually drawing setation and spinulation onto the two-dimensional images of the 3D visualizations was used to illustrate the pereopods. In addition, an interactive figure and rotation movie clips in the supplement section complement the species description, and the 3D raw data of the 3D type data are downloadable from the Gigascience Database repository. The new species is the sixth species of Pagurus Fabricius, 1775 reported from South Africa and is closely allied to the Indo-Pacific P. boriaustraliensis Morgen, 1990 and P. pitagsaleei McLaughlin, 2002, from which it differs by its shorter ocular peduncles, by the armature of the carpus of the right cheliped, and also in colouration. This study presents the first description of a hermit crab in which a majority of taxonomic details are illustrated through 3D volume-rendered illustrations. In addition, colour photographs and COI molecular barcodes are provided, and the latter compared to COI sequences of specimens from Western Australia previously identified as P. boriaustraliensis and of specimens of P. pitagsaleei from Taiwan, as well as to three additional South African members of the genus. The South African taxon was confirmed to be genetically distinct from all species tested.

Background Proximal femur has a significant functional modification on erect bipedal posture. Various proximal femoral parameters were analyzed in Western literature. This information was utilized in prosthetic designing. Implants designed for Western people are used in Indian patients undergoing hip surgeries such as internal fixation and replacement arthroplasty. Materials and Methods The study was done among 200 individuals (400 hips) with a normal hip joint after ethical committee clearance. Computed tomography scanning of proximal femur was done. Neck-shaft angle (NSA), neck width (NW), head diameter (HD), acetabular angle (AA) of sharp, horizontal offset (HO), vertical offset (VO), medullary canal diameter at the level of lesser trochanter (MDLT ), and acetabular version (AV) were measured. These parameters were tabulated and compared with various populations and statistically analyzed. Results The mean values were NSA 135°, NW 27 mm, femoral HD (HD) 42.5 mm, AA of sharp 35.5°, HO 37 mm, VO 46 mm, MDLT 20 mm, and AV 18.64°. The values differ when compared with Western population. This study results differed when compared with other Indian studies done in Northern and Northeast Indian population. Significant differences noted in the parameters between sexes and between the sides of the hip joint. Conclusion This study indicates that there are significant differences in anthropometric parameters of proximal femur among the South Indian population compared with Western population. Even within the Indian population, the anthropometric parameters vary region to region.

Concrete cores extracted from the same structural element may show variations in strength resulting from a lack of homogeneity and variations in the grade of compactness. This paper, while accounting for such variability, introduces a new formulation to assess both in situ and the potential characteristic strength of concrete. The first part addresses the Concrete Society report 11 on formulations and the formulation introduced by the author that considers new coefficients that take into account the addition of water to the cement mixer and the influence of excess voidage. The second part describes a case study in that the procedures were applied to an experimental campaign carried out on two series of cores. The visual means method proposed by report 11 is applied for excess voidage assessment to the first series of cores, while a computed axial tomography (CAT) scan allowing a direct estimate of the percentage of voids in different sections is applied to the cores of the second series. Results show noticeable variations in the percentage of voids within the same drilling. Moreover, the proposed formulation can estimate the actual value of both the in situ and potential characteristic strengths of concrete with a reasonable degree of approximation. Finally, a computed axial tomography (CAT) scan leads to extremely precise results, making it possible to evaluate the percentage of voids in different sections of the same core.

Three plastered skulls, dating to the Pre-Pottery Neolithic B, were found at the site of Yiftahel, in the Lower Galilee (Israel). The skulls underwent refitting and restoration processes, details of which are described herein. All three belong to adults, of which two appear to be males and one appears to be a female. Virtual cross-sections were studied and a density analysis of the plaster was performed using computed tomography scans. These were utilized to yield information regarding the modeling process. Similarities and differences between the Yiftahel and other plastered skulls from the Levant are examined. The possible role of skull plastering within a society undergoing a shift from a hunting-gathering way of life to a food producing strategy is discussed.

Facial nerve schwannomas are rare benign neoplasms. We report a case of a 60-year-old woman who initially presented with vestibular complaints. Magnetic resonance imaging (MRI) revealed a facial nerve schwannoma centered on the right geniculate ganglion extending in the labyrinthine segment. The patient consulted again after 2 months because she developed a sudden and severe right-sided sensorineural hearing loss. MRI showed no progression or pathological enhancement in the membranous labyrinth. A cone beam computed tomography (CT) of the temporal bone was performed and revealed a large erosion at the region of the geniculate ganglion in open communication with the middle turn of the cochlea. This case report demonstrates the importance of CT in facial nerve schwannomas for evaluating the impact on the surrounding structures.

Interpretation Basics of Cone Beam Computed Tomography is an easy-to-use guide to Cone Beam CT technology for general dental practitioners and dental students. It covers normal anatomy, common anatomical variants, and incidental findings that practitioners must be familiar with when interpreting CBCT scans.

To evaluate paraspinal back muscles of asymptomatic subjects using qualitative and quantitative analysis on CT and MRI and correlate the results with demographic data. Twenty-nine asymptomatic subjects were enrolled prospectively (age: mean 34.31, range 23-50; 14 men, 15 women) from August 2016 to April 2017. Qualitative analysis of muscles was done using Goutallier's system on CT and MRI. Quantitative analysis entailed cross sectional area (CSA) on CT and MRI, Hounsfield unit (HU) on CT, fat fraction using two-point Dixon technique on MRI. Three readers independently analyzed the images; intra- and inter-observer agreements were measured. Linear regression and Spearman's analyses were used for correlation with demographic data. CSA values were significantly higher in men (p < 0.001). Fat fraction was higher (22.53% vs. 14.35%) and HU lower (36.00 vs. 47.43) in women (p < 0.001). Intra- and inter-observer reliabilities of the two methods were greater than 0.8, except for CSA of L5/S1 on MRI; however, regarding quantitative analysis, decreasing HU and increasing fat fraction were correlated with increasing age, female gender and lower lumbar segment (p < 0.001). MRI and CT can be reliably used for qualitative and quantitative analysis of paraspinal back muscles, regarding fat content. Fat fraction and HU showed highest reliabilities.

Lung cancer remains the leading cause of cancer deaths in the United States. In the past decade, significant advances have been made in the science of non–small cell lung cancer (NSCLC). Screening has been introduced with the goal of early detection. The National Lung Screening Trial found a lung cancer mortality benefit of 20% and a 6.7% decrease in all-cause mortality with the use of low-dose chest computed tomography in high-risk individuals. The treatment of lung cancer has also evolved with the introduction of several lines of tyrosine kinase inhibitors in patients with EGFR, ALK, ROS1, and NTRK mutations. Similarly, immune checkpoint inhibitors (ICIs) have dramatically changed the landscape of NSCLC treatment. Furthermore, the results of new trials continue to help us understand the role of these novel agents and which patients are more likely to benefit; ICIs are now part of the first-line NSCLC treatment armamentarium as monotherapy, combined with chemotherapy, or after definite chemoradiotherapy in patients with stage III unresectable NSCLC. Expression of programmed cell death protein-ligand 1 in malignant cells has been studied as a potential biomarker for response to ICIs. However, important drawbacks exist that limit its discriminatory potential. Identification of accurate predictive biomarkers beyond programmed cell death protein-ligand 1 expression remains essential to select the most appropriate candidates for ICI therapy. Many questions remain unanswered regarding the proper sequence and combinations of these new agents; however, the field is moving rapidly, and the overall direction is optimistic.