Explore the vast range of titles available.

To investigate the prevalence, outcomes, and contributing factors of post-extraction maxillary lip entrapment (MLE) in cats, with a focus on anatomical and surgical technique-related variables. Thirty-seven client-owned cats undergoing maxillary canine tooth extraction between December 2022 and November 2024. This prospective study included cats undergoing maxillary canine tooth extraction performed by veterinary dental surgeons across three referral clinics. Specifically, we intended to explore the association between MLE and skull conformation, mandibular canine teeth crown height, distance between the crown tips of the maxillary and mandibular canine teeth, extent of maxillary canine alveolectomy, and presence/absence of caudal teeth on this clinical entity. Post-extraction MLE was classified as mild, moderate, or severe based on clinical findings and treatment requirements. Post-extraction MLE was observed in 26 cats (70.3%), with 23 of 26 cats (88.5%) being classified as having mild lesions, three (11.5%) with moderate lesions and none with severe lesions. Spontaneous improvement was noted in all mild cases. Only patients with moderate lesions required medical intervention. None of the evaluated factors had any statistically significant impact of the prevalence of MLE. Post-extraction MLE in cats is a frequent but predominantly mild and self-limiting complication. Conservative management typically suffices, and advanced imaging in future studies could enhance understanding of predisposing factors and surgical strategies, leading to improved patient outcomes.

To investigate the root canal anatomy of permanent maxillary and mandibular canines in a Turkish subpopulation using cone beam computed tomography (CBCT). Retrospective CBCT data of 300 patients admitted to our clinic between 2016 and 2018 were screened and evaluated. A total of 235 patients, 100 males and 135 females, aged 14-76 years (mean age 37.27±13.40) were included in this study. A total of 191 (44,8%) maxillary canine teeth and 235 (55,2%) mandibular canine teeth were examined. The number of roots and root canal morphology according to Vertucci’s classification, the presence of accessory canals, and the position of the apical foramen of the root were analyzed. The effect of gender and age on the incidence of root canal morphology was also investigated. The majority of the teeth had a Type I canal configuration in both maxillary canines (100%) and mandibular canines (92,8%). In the mandibular canines the other canal patterns found were Type III (6,8%), and Type II (0,4%). Apical foramen was centrally positioned in the majority of the teeth, 70,2% and 66,8% in maxillary and mandibular canines, respectively. The occurrence of two roots in mandibular canines was 3,8% and the root canal separation was found 53,8% and 46,2% in the middle and cervical third of the root, respectively. No significant statistical difference was observed effect of gender and age on the incidence of the root canal morphology and the position of the apical foramen. Due to the diverse morphology and the potential presence of a second canal for canine teeth among the Turkish subpopulation, dentists should perform endodontic treatments with greater care. CBCT is an accurate tool for the morphological assessment of the root canals.

An understanding of the pulp cavity anatomy of individual teeth is essential for success during endodontic therapy. The objective of this study was to document pulp cavity anatomy and summarize numerical data of maxillary and mandibular canine teeth of domestic cats using micro-computed tomography (micro-CT). Thirty-nine canine teeth from eleven domestic cat cadaveric specimens were extracted and prepared for scanning. Segmentation of the pulp cavity was performed using the Avizo (v2022.2) software package. The morphological features of the pulp cavity including overall shape, configuration, presence of apical deltas and lateral canals was recorded. A quantitative analysis was performed on thirty-one teeth to explore associations between pulp cavity volume and length, apical delta length, maximum apical delta foramina number and cusp-to-tip length using a linear mixed model. Correlation between pertinent continuous variables was assessed using a Pearson’s correlation test. Most pulp cavities exhibited varying curvature and ranged from a cylindrical configuration in the coronal third to an ovoid configuration in the middle to apical third. A ribbon-like flattened canal was observed in 6/31 teeth (19%). All canine teeth depicted an apical delta with various configurations except for two teeth that showed a single canal exiting at the apex. In 15/31 teeth (48%), the primary root canal within the apical delta could be clearly identified and in 16/31 (52%) the primary root canal was indiscernible. The results showed that the pulp cavities of maxillary canine teeth were significantly larger and longer and the cusp-to-tip length was longer, when compared to mandibular teeth. The apical delta length was negatively correlated to the volume of the pulp cavity. No specimens depicted lateral canals. This study revealed that the anatomy of the canine tooth pulp cavity in cats can vary considerably and should be a consideration when performing thorough debridement, shaping and obturation of the endodontic system.

This study evaluated the effect of filling technique and rotational speed on the efficacy of sealer cement placement using the Lentulo spiral filler. Cadaveric maxillary and mandibular canine teeth (n = 74) from age and breed matched fresh-frozen adult canine cadaver heads were utilized. Following routine mechano-chemical preparation, teeth were randomly divided into 8 treatment groups with varying rotational speeds [250–2,000 revolutions per minute (RPM)] and fill techniques (backfill technique versus pumping technique). The quality of the sealer cement fill was evaluated radiographically before and after master gutta percha cone placement. Percentage of voids present in the apical, midbody, and coronal portions of the tooth were subjectively scored as: no voids present, voids present in less than 25% of the area, voids present in 25–50% of the area, voids present in greater than 50% of the area. The apex was also scored as underfilled, adequately filled, or overfilled. Operating the Lentulo spiral filler at 2,000 RPM resulted in the best quality fill regardless of filling technique. The pumping technique with placement of the master gutta percha cone had a higher probability of success as compared to the backfill technique, but this finding lacked significance. Regardless of speed or technique, the apical region had the highest quality of fill. The addition of the master gutta percha cone improved the quality of fill. Therefore, we recommend using the Lentulo spiral filler at higher speeds with a pumping technique (followed by addition of a master gutta percha cone) to improve the quality of epoxy resin-based sealer cement placement.

The tooth is made up of three mineralized tissues, enamel, dentin, and cementum, which surround a non-mineralized tissue called the dental pulp. Micro-computed tomography (mCT) is an imaging technology based on X-rays that allows non-invasive visualization of objects at a microscopic scale, according to their radiopacity and in three dimensions (3D). Likewise, it allows the subsequent execution of morphological and quantitative analysis of the objects, such as, for example, the determination of the relative mineral density (MD). The present work aimed to describe the MD of feline teeth using mCT. The studied sample consisted of four European Shorthair cats, from which nine canine teeth were extracted per medical indication. These teeth were evaluated through dental radiography before and after their extraction. Using mCT and the CTAn software, the values of the relative mineral density of the root of each tooth and of specific segments corresponding to the coronal, middle, and apical thirds of the root were determined. Mean MD of root tissues was 1.374 ± 0040 g·cm−3, and of hard root, tissues was 1.402 ± 0.035 g·cm−3. Through mCT, it was possible to determine the mean MD values of feline canine teeth. The study of MD could become an ancillary method for the diagnosis and characterization of dental pathology.

Objective Canine tooth bud removal is a process of gouging out an infant’s canine tooth buds, using unsterile tools such as Sharpe blade, garlic, or knitting needle, without anesthesia. The aim of the study was to reveal dental complications of canine tooth bud removal among children who visited the dental clinic of the University of Gondar hospital. This study was an institution-based cross-sectional conducted from January 2015 to September 2016 at the University of Gondar hospital on 2–12 years children. The tooth was assessed for whether it had previously oral mutilated or not. In addition to this, the oral cavity was evaluated for the presence of missed, malformed or normal canine. Results A group of 355 children aged 2–12 years was examined clinically. The mean age of the children was 7.32 ± 3.12 (SD). The prevalence of canine tooth bud removal was 86.8% which was high in 6–9 years old (54.87%) and first position children (40.26%). The most common dental complications were; malformed enamel (hypoplastic) canine (48.5%) and missed/unerupted canine (38.6%).

BackgroundThe root resorption of the maxillary incisors after the orthodontic traction of impacted canines is a concern for clinicians. The aim of this case series report was to evaluate the root resorption of the maxillary incisors after traction until the occlusal plane of the bicortically impacted canines (placed between the two cortical bones in the middle of the alveolar process) located in a complex position using three-dimensional superimposition. This case series report describes the root resorption of the maxillary incisors after orthodontic traction with NiTi closed coil springs and a heavy anchorage appliance in three cases of bilateral impacted canines located in a complex position (bicortically) near to midline. Cone-beam computed tomographies (CBCTs) were obtained before and after traction. Root resorption in all root surfaces of the maxillary incisors was evaluated with color-coded maps using the ITK-SNAP and the 3D Slicer software to indicate loss of the root surface (in red) or gain of the surface (in blue) and was quantified in millimeters by the superimposition method.ResultsThe root changes mainly occurred in the apical third of the maxillary incisor root and did not exceed 2 mm.ConclusionsRoot resorption of the maxillary incisors after the traction of bicortically impacted canines located in a complex position was observed mainly in the apex region, and the amount of root resorption was smaller than 2 mm in all root surfaces.

This study evaluated the success rate of orthodontic treatment of linguoverted mandibular canines in dogs using a directly applied inclined plane device. Medical records were retrospectively evaluated at 11 veterinary dental specialty hospitals from 1999 to 2021. Malocclusion classes included 41.7% in class 1, 47.2% in class 2, 6.9% in class 3, and 4.2% in class 4. The severity of linguoversion was mild in 7.6% of teeth, moderate in 33.9%, and severe in 58.5%. There was complete resolution of linguoversion in 71.2% of teeth, functional resolution in 25.4%, and failure in 3.4%. The median treatment time was 42 (11–174) days. Adjuvant orthodontic treatments were performed at the same time as the inclined plane in 45.7% of teeth, including active force orthodontics, extractions of non-strategic teeth, gingivectomy, and odontoplasty. While the inclined plane was in place, 31.4% of dogs required an anesthetized appliance adjustment, and at the time of appliance removal, complications occurred in 19.4% of dogs. Of the teeth that had initial resolution, 14.4% had rebound movement that required additional treatment. This study supports the idea that an acrylic inclined plane is a good treatment option for linguoverted mandibular canines, with a 96.6% success rate within a median of 6 weeks. Yet, orthodontic retention may be necessary in these cases to avoid the need for additional therapies.

Fractured canine teeth (especially maxillary canine teeth) are common in domestic ferrets ( Mustela putorius furo ). We evaluated (detailed oral/dental and radiographic examination under general anesthesia) 18 domestic ferrets affected by 23 complicated crown fractures of periodontally healthy permanent maxillary canine teeth over a 2-year period. Average age of the ferrets at the time of diagnosis was 2.6 years. Only three teeth were discolored on clinical examination. Out of 23 teeth, 22 were radiographically evaluated. No radiographic evidence of endodontic disease was observed in 11/22 canine teeth. Inflammatory root resorption was observed in 5/22, periapical lucency in 5/22 teeth, apical widening of periodontal ligament space in 6/22 teeth, and failure of the pulp cavity to narrow in 3/22 teeth. All animals were treated by simple (closed) extraction of the affected teeth. Histological examination of eight teeth was performed. Pulp appeared histologically vital in five (3/5 showed no radiographic evidence of endodontic disease), pulpitis was diagnosed in two (both without radiographic evidence of endodontic disease) and pulp necrosis in one case (dental radiographs revealed apical widening of periodontal ligament space and failure of the pulp cavity to narrow). All extraction sites healed uneventfully by the 2-week recheck examination. Long-term follow-up revealed development of post-extraction upper lip entrapment with mandibular canine tooth in eight out of 18 ferrets, which appeared clinically irrelevant. According to clients seven out of 18 ferrets showed an improved quality of life. Simple tooth extractions are warranted in ferrets affected by complicated crown fracture of the periodontally healthy permanent maxillary canine teeth.

Background The reduction of canine teeth in adult males in whom permanent canine teeth eruption occurs should be considered due to the safety of humans or other monkeys. The objective of this study was to evaluate the complications of canine teeth reduction in macaques. Case presentation: Canine teeth reductions were performed in 8 rhesus and 2 cynomolgus macaques. Complications related to canine teeth reduction were evaluated at one to three week intervals during the experimental period by gross examination, CBC, and monitoring of appetite. One monkey showed a fistula due to periapical abscess and neutrophilia more than 2 years after canine teeth reduction, and extraction of the diseased canine tooth was performed; the other 9 monkeys showed no complications during the observation period. This report shows the effectiveness of canine teeth reduction with few complications. Conclusion Canine teeth reduction in male macaques is an acceptable procedure for reducing the severity of injury to humans or other monkeys.