Explore the vast range of titles available.

Thermal energy storage (TES) is a technology that stocks thermal energy by heating or cooling a storage medium so that the stored energy can be used at a later time for heating and cooling applications and power generation. TES systems are used particularly in buildings and in industrial processes. This paper is focused on TES technologies that provide a way of valorizing solar heat and reducing the energy demand of buildings. The principles of several energy storage methods and calculation of storage capacities are described. Sensible heat storage technologies, including water tank, underground, and packed-bed storage methods, are briefly reviewed. Additionally, latent-heat storage systems associated with phase-change materials for use in solar heating/cooling of buildings, solar water heating, heat-pump systems, and concentrating solar power plants as well as thermo-chemical storage are discussed. Finally, cool thermal energy storage is also briefly reviewed and outstanding information on the performance and costs of TES systems are included.

Depleting fossil fuel resources and anthropogenic climate changes are the reasons for the intensive development of new, sustainable technologies based on renewable energy sources. One of the most promising strategies is the utilization of hydrogen as an energy vector. However, the limiting issue for large-scale commercialization of hydrogen technologies is a safe, efficient, and economical method of gas storage. In industrial practice, hydrogen compression and liquefaction are currently applied; however, due to the required high pressure (30–70 MPa) and low temperature (−253 °C), both these methods are intensively energy consuming. Chemical hydrogen storage is a promising alternative as it offers safe storage of hydrogen-rich compounds under ambient conditions. Although many compounds serving as hydrogen carriers are considered, some of them do not have realistic perspectives for large-scale commercialization. In this review, the three most technologically advanced hydrogen carriers—dimethyl ether, methanol, and dibenzyltoluene—are discussed and compared. Their potential for industrial application in relation to the energy storage, transport, and mobility sectors is analyzed, taking into account technological and environmental aspects.

Improving energy recycle is an important way to save energy resources and preserve the global environment. Chemical heat pump (CHP) is a technology for saving energy, which utilizes chemical reactions to store thermal energy such as waste heat and solar heat, then release it to provide heat for heating/cooling/refrigeration. For a practical CHP, it is necessary to find cheaper and more stable supply materials. In order to evaluate the possibility of calcium oxide from natural Ofunato natural limestone including impurities, we compare Ofunato limestone with Kawara natural limestone and Garou natural limestone from Japan. These calcium oxides worked as a reactant for CaO/H2O/Ca(OH)2 CHP by repeated hydration/dehydration reaction cycle experiments in a thermogravimetric analyzer. As a result, Ofunato CaO exhibits a high hydration reaction rate after decarbonization at 1223 K for 5 h. The reactivity increased by the repeated hydration reaction although the first hydration rate was low. Furthermore, the sintering of impurities in Ofunato limestone occur easier than that in Kawara limestone with lower impurities. The impurities adhered to the surface of the CaO particle to make specific surface area of CaO particle smaller, which could inhibit hydration reaction of CaO particle. Even if Ofunato limestone contains some impurities, it can be utilized as a raw material for chemical heat pumps.

In order to fulfill consumer demand, energy storage may provide flexible electricity generation and delivery. By 2030, the amount of energy storage needed will quadruple what it is today, necessitating the use of very specialized equipment and systems. Energy storage is a technology that stores energy for use in power generation, heating, and cooling applications at a later time using various methods and storage mediums. Through the storage of excess energy and subsequent usage when needed, energy storage technologies can assist in maintaining a balance between generation and demand. Energy storage technologies are anticipated to play a significant role in electricity generation in future grids, working in conjunction with distributed generation resources. The use of renewable energy sources, including solar, wind, marine, geothermal, and biomass, is expanding quickly across the globe. The primary methods of storing energy include hydro, mechanical, electrochemical, and magnetic systems. Thermal energy storage, electric energy storage, pumped hydroelectric storage, biological energy storage, compressed air system, super electrical magnetic energy storage, and photonic energy conversion systems are the main topics of this study, which also examines various energy storage materials and their methodologies. In the present work, the concepts of various energy storage techniques and the computation of storage capacities are discussed. Energy storage materials are essential for the utilization of renewable energy sources and play a major part in the economical, clean, and adaptable usage of energy. As a result, a broad variety of materials are used in energy storage, and they have been the focus of intense research and development as well as industrialization. This review article discusses the recent developments in energy storage techniques such as thermal, mechanical, electrical, biological, and chemical energy storage in terms of their utilization. The focus of the study has an emphasis on the solar-energy storage system, which is future of the energy technology. It has been found that with the current storage technology, the efficiency of the various solar collectors was found to be increased by 37% compared with conventional solar thermal collectors. This work will guide the researchers in making their decisions while considering the qualities, benefits, restrictions, costs, and environmental factors. As a result, the findings of this review study may be very beneficial to many different energy sector stakeholders.

Chemical pressure storage tanks are containers designed to store fluids at high pressures, i.e., their internal pressure is higher than the atmospheric pressure. They can come in various shapes and sizes, and may be fabricated from a variety of materials. As aggressive chemical agents stored under elevated pressures can cause significant damage to both people and the environment, it is essential to develop systems for the early damage detection and the monitoring of structural integrity of such vessels. The development of early damage detection and condition monitoring systems could also help to reduce the maintenance costs associated with periodic inspections of the structure and unforeseen operational breaks due to unmonitored damage development. It could also reduce the related environmental burden. In this paper, we consider a hybrid material composed of glass-fiber-reinforced polymers (GFRPs) and a polyethylene (PE) layer that is suitable for pressurized chemical storage tank manufacturing. GFRPs are used for the outer layer of the tank structure and provides the dominant part of the construction stiffness, while the PE layer is used for protection against the stored chemical medium. The considered damage scenarios include simulated cracks and an erosion of the inner PE layer, as these can be early signs of structural damage leading to the leakage of hazardous liquids, which could compromise safety and, possibly, harm the environment. For damage detection, PZT sensors were selected due to their widely recognized applicability for the purpose of structural health monitoring. For sensor installation, it was assumed that only the outer GFRP layer was available as otherwise sensors could be affected by the stored chemical agent. The main focus of this paper is to verify whether elastic waves excited by PZT sensors, which are installed on the outer GFRP layer, can penetrate the GFRP and PE interface and can be used to detect damage occurring in the inner PE layer. The efficiency of different signal characteristics used for structure evaluation is compared for various frequencies and durations of the excitation signal as well as feasibility of PZT sensor application for passive acquisition of acoustic emission signals is verified.

Enhancing NH3 as a carbon‐free energy carrier of H2 and next‐generation fuel is a promising approach for a sustainable society. Chemically storing NH3 molecules in crystal structures offers better selectivity and reusability than storage in traditional porous materials based on physicochemical adsorption; however, designing materials that can be reversibly stored in structural gaps is still a significant challenge. Herein, the use of NH4ZnPO4, which is previously used as a fertilizer, is proposed as an NH3 uptake material through a chemical storage mechanism. The NH4ZnPO4 particles synthesized by a wet mechanochemical method with monoclinic and hexagonal crystal structures can incorporate NH3 molecules and directly transform them into NH4Zn(NH3)PO4 without producing byproducts. The chemical storage mechanism depends on the particle morphology; therefore, the uptake amount per surface area surpasses that of porous materials. NH4ZnPO4 exhibited excellent cycling performance due to its reusability, which is regenerated by releasing NH3 from NH4Zn(NH3)PO4 when heated in air at ≈100 °C. Taking inspiration from previously used and familiar fertilizers further extends this new area of innovative materials that can be used for the reversible storage of low‐molecular‐weight gases. A new inorganic ammonia uptake material as an alternative to activated carbon, zeolites, and metal–organic frameworks is reported. NH4ZnPO4, previously used as a fertilizer, can be a reversible chemical storage material for ammonia. The chemical storage mechanism depends on the particle morphology; therefore, the uptake amount per surface area surpasses that of activated carbon, a typical inorganic porous material.

This article presents some crucial findings of the joint research project entitled «Storage of electric energy from renewable sources in the natural gas grid-water electrolysis and synthesis of gas components». The project was funded by BMBF and aimed at developing viable concepts for the storage of excess electrical energy from wind and solar power plants. The concept presented in this article suggests the conversion of CO 2 -containing gases into methane in a pressurized reactor using hydrogen produced via electrolysis. The produced gas can be upgraded to synthetic natural gas (SNG) and fed into the well-developed German natural gas grid. This concept benefits from the high storage capacity of the German gas grid and does not require any extensions of the current gas or power grid. The reaction heat released by the exothermic methanation reaction leads to a temperature rise of the gas in the fixed bed catalyst of the reactor. The conversion of carbon dioxide is limited in accordance to the chemical equilibrium which depends strongly on temperature and pressure. For maximum carbon dioxide conversion, it is convenient to split the methanation into several stages adding cooling sections in between. This article focuses on the methanation process and its transfer onto an industrial scale evaluating the different plant capacities and feedstock mixtures used. The methanation takes place in a staged fixed bed reactor. This staged reactor concept is an in-house development based on know-how from the sulfuric acid production technology.

Human factors are important causes of hazardous chemical storage accidents, and clarifying the relationship between human factors can help to identify the logical chain between unsafe behaviors and influential factors in accidents. Therefore, the human factor relationship of hazardous chemical storage accidents was studied in this paper. First, the human factors analysis and classification system (HFACS), which originated from accident analysis in the aviation field, was introduced. Since some items were designed for aviation accident analysis, such as the item “Crew Resource Management”, it is not fully applicable to the analysis of hazardous chemical storage accidents. Therefore, this article introduced some modifications and changes to make the HFACS model suitable for the analysis of hazardous chemical storage accidents. Based on the improved HFACS model, 42 hazardous chemicals storage accidents were analyzed, and the causes were classified. After analysis, we found that under the HFACS framework, the most frequent cause of accidents is resource management, followed by violations and inadequate supervision, and finally the organizational process and technological environment. Finally, according to the statistical results for the various causes of accidents obtained from the improved HFACS analysis, the chi-square test and odds ratio analysis were used to further explore the relevance of human factors in hazardous chemical storage accidents. The 16 groups of significant causal relationships among the four levels of factors include resource management and inadequate supervision, planned inappropriate operations and technological environment, inadequate supervision and physical/mental limitations, and technological environment and skill-based errors, among others.

The domino event caused by fire is one of the common accidents in hydrocarbon storage tank farms, which further expands the severity and scope of the accident. Due to the different failure sequence of the storage tanks in a domino accident, the radiant heat generated by the failed storage tank to the target tank is different. Based on the influence of this synergistic effect, this study combined the Monte Carlo algorithm and FSEM, and proposed a fast real-time probability calculation method for a fire domino accident in a storage tank area, for the first time. This method uses the Monte Carlo algorithm to simulate all accident scenarios, and obtains the evolution of multiple escalation fire domino accidents under the synergistic effect according to FSEM, and then calculates the real-time failure probability and risk. Based on a comprehensive analysis of the accident propagation path, this method avoids the problem of a large amount of calculation, and is conducive to the rapid and effective analysis of the fire risk in a storage tank area and the formulation of corresponding risk reduction measures. The effectiveness and superiority of the proposed method were proved by a case study.