Explore the vast range of titles available.

A direct current (DC) microgrid has become a superior power system in recent years due to the development of DC loads and higher efficiency of DC systems. One of the challenging problems on DC microgrids operation is protection, and it is still a particular concern associated with the challenges of developing a proper protection scheme owing to its characteristics and lack of standards in DC protection. Due to the significant increasing interest on DC microgrid; this study investigates protection problems and schemes that need to be addressed in modern power systems involving DC microgrids. This study analyses and presents a comprehensive review of the most recent growth in the DC microgrids protection. Additionally, the fault characteristics of DC microgrids, the impact of constant power loads, the protection devices and several proposed methods to overcome the protection problems are discussed. The differences between the proposed protection methods for the DC microgrids are also discussed.

Low voltage direct current (LVDC) distribution has gained the significant interest of research due to the advancements in power conversion technologies. However, the use of converters has given rise to several technical issues regarding their protections and controls of such devices under faulty conditions. Post-fault behaviour of converter-fed LVDC system involves both active converter control and passive circuit transient of similar time scale, which makes the protection for LVDC distribution significantly different and more challenging than low voltage AC. These protection and operational issues have handicapped the practical applications of DC distribution. This paper presents state-of-the-art protection schemes developed for DC Microgrids. With a close look at practical limitations such as the dependency on modelling accuracy, requirement on communications and so forth, a comprehensive evaluation is carried out on those system approaches in terms of system configurations, fault detection, location, isolation and restoration.

The occurrence of short-circuit faults in AC/DC microgrids gives rise to exceptionally high currents with rapid escalation, particularly in DC feeders where current zero-crossing is absent. This study introduces a comprehensive design procedure for a solid-state breaker tailored to address this challenge. A key innovation of the proposed solid-state circuit breaker lies in the incorporation of a current limiter reactor, which effectively constrains the current flow in both the load commutation switch and main breakers. Additionally, the inclusion of a resistive branch diminishes energy dissipation in the main breakers, safeguarding them against voltage stress. Consequently, the operational efficiency of the breaker is significantly enhanced, ensuring swift and efficient fault current interruption in vulnerable AC/DC microgrid scenarios. The efficacy of the proposed solid-state breaker was rigorously examined through analytical studies, and the results were validated using MATLAB/Simulink simulations. This breakthrough design represents a promising advancement in the realm of microgrid protection, offering a robust solution for mitigating the impact of short-circuit faults in AC/DC systems.

DC microgrids have gained significant attention in recent years due to their potential to enhance energy efficiency, integrate renewable energy sources, and improve the resilience of power distribution systems. However, the reliable operation of DC microgrids relies on the early detection and location of faults to ensure an uninterrupted power supply. This paper aims to develop fast and reliable fault detection and location mechanisms for DC microgrids, thereby enhancing operational efficiency, minimizing environmental impact, and contributing to resource conservation and sustainability goals. The fault detection method is based on compressed sensing (CS) and Regression Tree (RT) techniques. Besides, an accurate fault location method using the feature matrix and long short-term memory (LSTM) model combination has been provided. To implement the proposed fault detection and location method, a DC microgrid equipped with photovoltaic (PV) panels, the vehicle-to-grid (V2G) charging station, and a hybrid energy storage system (ESS) are used. The simulation results represent the proposed methods’ superiority over the recent studies. The fault occurrence in the studied DC microgrid is detected in 1 ms, and the proposed fault location method locates the fault with an accuracy of more than 93%. The presented techniques enhance DC microgrid reliability while conserving renewable resources, vital to promoting a greener and more sustainable power grid.

Ensuring a protection scheme in a DC distribution system is more difficult to achieve against pole-to-ground faults than in AC distribution system because of the absence of zero crossing points and low line impedance. To complement the major obstacle of limiting the fault current, several compositions have been proposed related to mechanical switching and solid-state switching. Among them, solid-state circuit breakers (SSCBs) are considered to be a possible solution to limit fast fault current. However, they may cause problems in circuit complexity, reliability, and cost-related troubles because of the use of multiple power semiconductor devices and additional circuit configuration to commutate the current. This paper proposes a SSCB with a coupled inductor (SSCB-CI) that has a symmetrical configuration. The circuit is comprised of passive components like commutation capacitors, a CI, and damping resistors. Thus, the proposed SSCB-CI offers the advantages of a simple circuit configuration and fewer utilized power semiconductor devices than the other typical SSCBs in the DC microgrid. For the analysis, six operation states are described for the voltage across the main switches and fault current. The effectiveness of the SSCB-CI against the short-circuit fault is proved via simulation and experimental results in a lab-scale prototype.

Microgrids have emerged as a feasible solution for consumers, comprising Distributed Energy Resources (DERs) and local loads within a smaller geographical area. They are capable of operating either autonomously or in coordination with the main power grid. As compared to Alternating Current (AC) microgrid, Direct Current (DC) microgrid helps with grid modernisation, which enhances the integration of Distributed and Renewable energy sources, which promotes energy efficiency and reduces losses. The integration of energy storage systems (ESS) into microgrids has garnered significant attention due to the capability of ESS to store energy during periods of low demand and then provide it during periods of high demand. This research includes planning, operation, control, and protection of the DC microgrid. At the beginning of the chapter, a quick explanation of DC microgrids and their advantages over AC microgrids is provided, along with a thorough evaluation of the various concerns, control techniques, challenges, solutions, applications, and overall management prospects associated with this integration. Additionally, this study provides an analysis of future trends and real-time applications, which significantly contributes to the development of a cost-effective and durable energy storage system architecture with an extended lifespan for renewable microgrids. Therefore, providing a summary of the anticipated findings of this scholarly paper contributes to the advancement of a techno-economic and efficient integration of ESS with a prolonged lifespan for the use of green microgrids.

The DC microgrid has become a typical distribution network due to its excellent performance. However, a well-designed protection scheme still remains a challenge for DC microgrids. At present, researches on DC microgrids primarily focus on the topology structure, control method and energy control, while researches on fault analysis, detection and isolation have not drawn enough attention. Therefore, this paper intends to depict the current research status in different relative areas and review the proposed protection strategies in order to help researchers to have a clear understanding on DC microgrid protection. Meanwhile, to solve the protection issues and promote the development of the DC microgrid, this paper points out the key areas of future research. The future protection research directions lie in the development of novel protection devices, which are based on electronic technology to provide loose protection constraints and the improvement of suitable protection schemes. In addition, the novel concept of coordinated strategy of control and protection of the DC microgrids is explained.

The introduction of hybrid alternating current (AC)/direct current (DC) distribution networks led to several developments in smart grid and decentralized power system technology. The paper concentrates on several topics related to the operation of hybrid AC/DC networks. Such as optimization methods, control strategies, energy management, protection issues, and proposed solutions. The implementation of neural network optimization methods has great importance for the successful integration of multiple energy sources, dynamic energy management, establishment of system stability and reliability, power distribution optimization, management of energy storage, and online fault detection and diagnosis in hybrid networks like the hybrid AC–DC microgrids (MG). Taking advantage of renewable energy generation and cost-cutting through the neural network optimization technique holds the key to these progressions. Besides identifying the challenges in the operation of a hybrid system, the paper also compares this system to conventional MGs and shows the benefits of this type of system over different MG structures. This review compares the different topologies, particularly looking at the AC–DC coupled hybrid MGs, and shows the important role of the interlinking of converters that are used for efficient transmission between AC and DC MGs and generally used to implement the different control and optimization techniques. Overall, this review paper can be regarded as a reference, pointing out the pros and cons of integrating hybrid AC/DC distribution networks for future study and improvement paths in this developing area .

The integration of DC networks including DC microgrids (DCMGs) into power systems is rapidly increasing. This is notably attributed to the distinctive fault current characteristics arising from inverter-based distributed generation resources in DCMGs, which differentiate them from conventional networks. As a result, the protection of DCMGs presents considerable challenges. Leveraging the recent strides in artificial intelligence, this paper introduces a novel multi-agent-based protection scheme for DC microgrids. Subsequently, three fault classification approaches are proposed in an intelligent protection scheme platform, employing diverse machine learning-based methods as a backup protection for fault detection and the main protection for fault location. The proposed protection scheme uses three main protection layers—namely, equipment, substation, and system—each endowed with specialized agents. In this way, the first and second fault classification approaches employ classifiers based on machine learning algorithms, such as Support Vector Machine (SVM) and Decision Tree (DT), to ascertain the microgrid status. Subsequent fault location is accomplished through various neural networks dedicated to the fault location. In the third approach, three Deep Neural Networks (DNNs) are proposed for fault classification, prompting the exclusion of classifiers from the substation layer due to the heightened training proficiency of DNNs. Intelligent Electronic Devices (IEDs) are placed at the beginning of the lines and send voltage and current information to the substation layer. Communication among agents and layers is performed by the IEC-61850 protocol. Comprehensive simulations and analyses are conducted using DIgSILENT, MATLAB, and Python (TensorFlow platform and Keras library) software. The findings underscore the efficacy of the proposed scheme and Fault Detection and Location (FDL) approaches, affirming their capability for precise fault classification and location determination.

DC microgrids (DCMGs) integrate and coordinate various DC distribution generation units including various renewable energy sources and battery storage systems, and have been used in satellites, the International Space Station, telecom power stations, computer power supplies, electric aircraft, and electric ships. However, the presence of constant power loads (CPLs) can cause instability in DCMGs. Thus, this paper reviews the stabilization techniques that can resolve instability caused by CPLs, as well as various parameters of CPLs, such as bandwidth, and the frequency of the CPLs that can stabilize the DCMGs. It also discusses recent trends and future work in finding stability limits using the parameters of CPLs. It should be useful for directing research towards appropriate mathematical and experimental approaches for the stability of DCMGs with CPLs.