Explore the vast range of titles available.

Array based detection techniques with fluorescence signal reading is a powerful tool for multiple targets analysis. However, when applied fluorescence array for microRNA detection, time-consuming multi-steps surface signal amplification is usually required due to the low abundance of microRNA in total RNA expressions, which impairs detection efficiency and limits its application in point of care test (POCT) manner. Herein, DNA cascade reactors (DCRs) functionalized photonic crystal (PC) array was fabricated for express and sensitive detections of miRNA-21 and miRNA-155. DCRs were assembled by interval conjugation of self-quenched hairpin DNA probes to single strand DNA nanowire synthesized by rolling circle amplification, which generated cascade DNA hybridization reactions in response to target miRNA with instant fluorescence recovery signal. PC array patterns with multi-structure colors further amplified fluorescence with their respective photonic bandgaps (PBGs) matching with the emission peaks of fluorescence molecules labelled on DCRs. The as-prepared DCRs functionalized PC array demonstrated express and sensitive simultaneous detections of miRNA-21 and miRNA-155 with hundreds fM detection limits only in 15 min, and was successfully applied in fast quantifications of low abundance miRNAs from cell lysates and spiked miRNAs from human serum, which would hold great potential for disease diagnosis and therapeutic effect monitoring with a POCT manner.

According to aptamer-mediated hairpin DNA cascade amplifier and gold nanoparticles aggregation, an optical platform for cancer cells determination has been proposed. High-affinity chimeric aptamers were used for cancer cell detection and also as an initiator for beginning hairpin assembly to construct three-way junction (3WJ) nanostructures. These three hairpins were modified at 3′ ends with biotin. In the presence of target cell, chimeric aptamer binds to its ligand on cell surface and initiates 3WJ nanostructures formation. These 3WJ nanostructures interact with streptavidin-modified gold nanoparticles (AuNPs) via non-covalent biotin-streptavidin interactions and create a crossover lattice of nanoparticles. This event leads to AuNPs aggregation and red-shifting. The results were confirmed by gel electrophoresis and UV-visible spectrophotometry. The dynamic range of this assay is 25 to 10 7 cells with a detection limit of 10 cells which is respectively 9 and 4 times more significant than the sensitivity of AuNP-based approaches without amplification and enzyme-mediated signal amplification. Graphical abstract

In this paper, we introduce a novel encapsulation system for DNA oligonucleotides. Supramolecular assembly of melamine cyanurate encapsulates DNA at pH 7 and start to release it at pH less than 6.5. We study the assembly and disassembly in time in specially designed reaction‐diffusion system. Magnesium ions allow spatial separation of DNA with the highest DNA concentration in the core of melamine cyanurate capsule. Molecular dynamics (MD) simulation shows that DNA acts as a nucleation centre for melamine cyanurate. Dataset of fluorescent images analysed by machine learning algorithms indicates correlation between structure of melamine cyanurate capsules for DNA trapping and concentration of magnesium ions. The concentration of magnesium ions can be recognized with 96% accuracy proving that all environmental conditions are extremely important during the self‐assembly and should be considered for laboratory and industrial applications of the suggested approach. Moreover, the encapsulated DNA can undergo a cascade reaction consisting of hybridization with complementary strand and its cleavage at a designated site. This reactivity opens a fresh avenue for various applications in biosensing, diagnostics, DNA compartmentalization, and even gives new hints for the origin‐of‐life questions. The present paper provides a new approach to encapsulate and concentrate nucleic acids (DNA) in supramolecular structures formed from melamine and cyanuric acid and their derivatives. These DNA‐loaded supramolecular structures hold promise for gene therapy and diagnostic applications.

Artificially designed molecular systems with programmable behaviors have become a valuable tool in chemistry, biology, material science, and medicine. Although information processing in biological regulatory pathways is remarkably robust to error, it remains a challenge to design molecular systems that are similarly robust. With functionality determined entirely by secondary structure of DNA, strand displacement has emerged as a uniquely versatile building block for cell-free biochemical networks. Here, we experimentally investigate a design principle to reduce undesired triggering in the absence of input (leak), a side reaction that critically reduces sensitivity and disrupts the behavior of strand displacement cascades. Inspired by error correction methods exploiting redundancy in electrical engineering, we ensure a higher-energy penalty to leak via logical redundancy. Our design strategy is, in principle, capable of reducing leak to arbitrarily low levels, and we experimentally test two levels of leak reduction for a core “translator” component that converts a signal of one sequence into that of another. We show that the leak was not measurable in the high-redundancy scheme, even for concentrations that are up to 100 times larger than typical. Beyond a single translator, we constructed a fast and low-leak translator cascade of nine strand displacement steps and a logic OR gate circuit consisting of 10 translators, showing that our design principle can be used to effectively reduce leak in more complex chemical systems.

Toward the construction of robotic and cybernetic systems with molecular reactions, development of a reaction that can rapidly generate single-stranded DNA (ssDNA) molecules in response to an input signal is an essential demand. This study explored the cascading of DNA generation reactions employing DNA polymerase and nicking endonuclease to achieve significant amplification of ssDNA molecules serving as signals to direct and fuel the operation of DNA-based systems. The modular architecture allows for interconnection with other reactions through primer-binding sequence or template design, making it adaptable to various molecular robotic components. The research aims to contribute to the development of efficient and reliable amplification circuits for molecular robotics and cybernetics. The cascading reactions, implemented up to three layers, exhibit enhanced amplification rates and sensitivities at physiological temperatures, enabling stable hybridization with complementary sequences. The investigation reveals the potential of the proposed approach to bridge the molecular quantity gap and restore signals in molecular systems including molecular robots and related applications. The experimental validation demonstrates the feasibility of achieving up to 100,000-fold amplification in response to low concentrations of primers within two hours, driving the structural transformation of DNA probes and nanomotors, while suppressing non-specific leak amplification, thereby showcasing practical applicability. The study's findings address fundamental challenges in ssDNA amplification and opens avenues for creating intelligent systems composed of molecular components with increased sensitivity and responsiveness.

We can formulate mixtures of oligonucleotide–antibody conjugates to act as molecular cascade-based automata that analyze pairs of cell surface markers (CD markers) on individual cells in a manner consistent with the implementation of Boolean logic—for example, by producing a fluorescent label only if two markers are present. While traditional methods to characterize cells are based on transducing signals from individual cell surface markers, these cascades can be used to combine into a single signal the presence of two or even more CDs. In our original design, oligonucleotide components irreversibly flowed from one antibody to another, driven by increased hybridizations, leading to the magnitude of the final signal on each cell being determined by the surface marker that was the least abundant. This is a significant limitation to the precise labeling of narrow subpopulations, and, in order to overcome it, we changed our design to accomplish signal amplification to a more abundant cell surface marker. We show the AMPLIFY function on two examples: (1) we amplify the fluorescent label from the CD19 marker onto a fivefold more abundant CD45, and (2) we amplify broadly distributed CD45RA to a more constant marker, CD3. We expect this new function to enable the increasingly complex Boolean analysis of cell surfaces.

The ataxia-telangiectasia mutated (ATM) protein kinase is activated by DNA double-strand breaks (DSBs) through the Mre11-Rad50-Nbs1 (MRN) DNA repair complex and orchestrates signaling cascades that initiate the DNA damage response. Cells lacking ATM are also hypersensitive to insults other than DSBs, particularly oxidative stress. We show that oxidation of ATM directly induces ATM activation in the absence of DNA DSBs and the MRN complex. The oxidized form of ATM is a disulfide-cross-linked dimer, and mutation of a critical cysteine residue involved in disulfide bond formation specifically blocked activation through the oxidation pathway. Identification of this pathway explains observations of ATM activation under conditions of oxidative stress and shows that ATM is an important sensor of reactive oxygen species in human cells.

Ataxia telangiectasia and Rad3 related (ATR) activation after replication stress involves a cascade of reactions, including replication protein A (RPA) complex loading onto single-stranded DNA and ATR activator loading onto chromatin. The contribution of histone modifications to ATR activation, however, is unclear. Here, we report that H3K14 trimethylation responds to replication stress by enhancing ATR activation. First, we confirmed that H3K14 monomethylation, dimethylation, and trimethylation all exist in mammalian cells, and that both SUV39H1 and SETD2 methyltransferases can catalyze H3K14 trimethylation in vivo and in vitro. Interestingly, SETD2-mediated H3K14 trimethylation markedly increases in response to replication stress induced with hydroxyurea, a replication stress inducer. Under these conditions, SETD2-mediated H3K14me3 recruited the RPA complex to chromatin via a direct interaction with RPA70. The increase in H3K14me3 levels was abolished, and RPA loading was attenuated when SETD2 was depleted or H3K14 was mutated. Rather, the cells were sensitive to replication stress such that the replication forks failed to restart, and cell-cycle progression was delayed. These findings help us understand how H3K14 trimethylation links replication stress with ATR activation.

An upgraded nicking/polymerization strategy for ultrasensitive electrochemical detection of Watermelon mosaic virus (WMV) is proposed on the basis of the exonuclease and polymerase activity of T4 DNA polymerase and Mg2+-dependent DNAzyme-assisted and hemin/G-quadruplex DNAzyme-assisted cascade amplification strategies. Briefly, the hybridized DNA of the target WMV sequence, HP1, and P1 was recognized and nicked by nicking endonuclease Nb.BbvCI, and two DNA segments (P1-25 and P1-6) were produced. P1-25 was digested in the 3′→5′ direction, and digestion was halted at the 3′-terminal G locus with the exonuclease activity of T4 DNA polymerase. When dNTP solution mix was added to the mixture, an intact enzymatic sequence of Mg2+-dependent DNAzyme was synthesized by T4 DNA polymerase, which hybridized with its substrate sequence in the loop segment of HP2 immobilized on a gold electrode and initiated the cleavage round. The caged G-quadruplex sequence was released and formed hemin/G-quadruplex-based DNAzyme, resulting in sharply increased electrochemical signals. A correlation between the differential pulse voltammetry signal and the concentration of target WMV sequence was obtained in the range from 50 fM to 1 nM, with 50 fM detection limit. Because the nicking and polymerization reactions are irreversible and share the same buffer, the cascade amplification strategy is an ultrasensitive and high-efficiency strategy, indicating potential for viral detection.

The plant hormone cytokinin affects a diverse array of growth and development processes and responses to the environment. How a signaling molecule mediates such a diverse array of outputs and how these response pathways are integrated with other inputs remain fundamental questions in plant biology. To this end, we characterized the transcriptional network initiated by the type-B ARABIDOPSIS RESPONSE REGULATORs (ARRs) that mediate the cytokinin primary response, making use of chromatin immunoprecipitation sequencing (ChIP-seq), protein-binding microarrays, and transcriptomic approaches. By ectopic overexpression of ARR10, Arabidopsis lines hypersensitive to cytokinin were generated and used to clarify the role of cytokinin in regulation of various physiological responses. ChIP-seq was used to identify the cytokinin-dependent targets for ARR10, thereby defining a crucial link between the cytokinin primary-response pathway and the transcriptional changes that mediate physiological responses to this phytohormone. Binding of ARR10 was induced by cytokinin with binding sites enriched toward the transcriptional start sites for both induced and repressed genes. Three type-B ARR DNA-binding motifs, determined by use of protein-binding microarrays, were enriched at ARR10 binding sites, confirming their physiological relevance. WUSCHEL was identified as a direct target of ARR10, with its cytokinin-enhanced expression resulting in enhanced shooting in tissue culture. Results from our analyses shed light on the physiological role of the type-B ARRs in regulating the cytokinin response, mechanism of type-B ARR activation, and basis by which cytokinin regulates diverse aspects of growth and development as well as responses to biotic and abiotic factors.