Explore the vast range of titles available.

Objective: The primary objective of this cross-sectional national study was to investigate the status of digital dental technology (DDT) adoption in Saudi Arabian undergraduate dental education. A secondary objective was to explore the impact of dental schools’ funding sources to incorporate digital technologies. Methods: A self-administered questionnaire was distributed to the chairpersons of prosthetic sciences departments of the 27 dental schools in Saudi Arabia. If any department chairman failed to respond to the survey, a designated full-time faculty member was contacted to fill out the form. The participants were asked about the school’s sector, DDT implementation in the curriculum, implemented level, their perceptions of the facilitators and challenges for incorporating DDT. Results: Of the 27 dental schools (18 public and 8 private), 26 responded to the questionnaire (response rate: 96.3%). The geographic distribution of the respondent schools was as follows: 12 schools in the central region, 6 in the western region, and 8 in other regions. Seventeen schools secure and preserve patients’ records using electronic software, whereas nine schools use paper charts. Seventeen schools (64,4%) implemented DDT in their curricula. The schools that did not incorporate DDT into their undergraduate curricula were due to not being included in the curriculum (78%), lack of expertise (66%), untrained faculty and staff (44%), and cost (33%). Conclusions: This national study showed that digital components still need to be integrated into Saudi Arabian dental schools’ curricula and patient care treatment. Additionally, there was no association between funding sources and the DDT implementation into the current curricula. Consequently, Saudi dental schools must emphasize the implementation and utilization of DDT to align with Saudi Vision 2030 for healthcare digitization and to graduate competent dentists in digital dental care.

Background Digital dental technology (DDT) has progressed and been introduced to Taiwan in the recent years, gradually changing the industry ecology. Many studies have demonstrated that DDT is more accurate and faster than conventional dental technology. However, there is a paucity of research exploring dental technicians’ perspectives on digital dental techniques, and their burnout, job satisfaction, and turnover intention. Methods This cross-sectional survey with convenience sampling was conducted at the conference venue of the Taiwan Association of Dental Technology to investigate the perspectives of dental technicians. We used the snowballing method in this study; two sampling methods were adopted, a convenience sampling of dental technicians to complete a survey, followed by asking the survey participants of the convenience sample to invite their colleagues to participate in the online survey. The survey questionnaire included questions on demographics, work-related information, acceptance and experiences of dental technicians toward DDT, occupational burnout, job satisfaction, and turnover intention. Regression models were used to determine the predictors of job satisfaction and determinants of turnover intention. Results In total, 341 valid questionnaires were obtained. Overall, the participants reported long working hours (95.5%), positive score on the DDT acceptance scale, moderate job satisfaction, higher personal burnout, and work burnout, along with lower over-commitment. Among them, 32.9% and 28.2% reported the intention to leave their organization and profession, respectively. The stepwise multiple regression model revealed that higher work burnout decreased job satisfaction, while higher DDT acceptance and position as employer increased job satisfaction. The binary logistic regression models revealed that geographical area of workplace, work burnout, and job satisfaction were significant predictors of turnover intentions. Conclusions Many Taiwanese dental technicians reported turnover intentions and higher burnout. With the trend of digitalization in the dental industry, even though most dental technicians had a positive outlook toward DDT, its influence on job satisfaction appears limited. Retaining good and professional talents required of a dental technician is crucial, especially as Taiwan’s dental care becomes increasingly specialized. Strategies for improving the work environment and occupational health of dental technicians should thus be the focus of future studies.

Now available in a second edition, Basics of Dental Technology is a complete reference for the current techniques and materials used in dental technology. * Retains the accessible, task-based approach and step-by-step guidance of the first edition * Features updates throughout, as well as a new chapter on digital dental technology and an interactive student website to support self-assessment * Explains key competencies, concepts, instruments, and equipment, and also introduces more specialist techniques and procedures, such as denture prosthetics, fixed prosthodontics and orthodontic work * Provides essential information for trainee dental technicians and students learning about dental technology, including study tips and strategies for working effectively within a dental team

Objectives: The aim of this study was to explore the knowledge, attitude, and practice (KAP) with regard to digital dental technologies among dentists in Jiangsu province. Methods: This web-based cross-sectional study enrolled dentists in Jiangsu province during June, 2023. A web-based questionnaire was used to collect the demographic characteristics of the participants and KAP regarding digital dental technologies. The structural equation model (SEM) was used to analyze the associations between KAP dimensions. Results: A total of 284 questionnaires were collected, of which 212 (74.65%) were valid, and 108 (50.94%) of the participants were male. Their knowledge, attitude, and practice scores were 14.33 ± 3.59 (possible range: 0–19), 26.17 ± 3.40 (possible range: 8–40), and 10.73 ± 3.11 (possible range: 4–16), respectively, indicating sufficient knowledge, a positive attitude, and proactive practice. Cone–beam computed tomography (CBCT) was the most well-understood digital dental technology among the dentists (205, 96.70%), followed by intraoral scanning/models and digital impression scanning/facial scanning (198, 93.40%), computer-aided design/computer-aided manufacture (CAD/CAM) (177, 83.49%), three-dimensional printing (175, 82.55%), and surgical guides (175, 82.55%). CBCT was the most frequently used technique (90.09%), followed by intraoral scanning (72.17%), impression scanning (54.25%), and CAD/CAM (42.45%). The SEM showed that knowledge had a direct effect on attitude (β = 0.283, p < 0.001), and attitude had a direct effect on practice (β = 0.280, p < 0.001), demonstrating that knowledge had an indirect effect on practice. Knowledge also had a direct effect on practice (β = 0.310, p < 0.001). Conclusions: Dentists in Jiangsu province had sufficient knowledge, a positive attitude, and proactive practice with regard to digital dental technologies. However, policies should encourage dentists to integrate digital technologies into their practice by establishing sufficient understanding and positive attitudes.

Purpose of Review Within this review, the current needs of the dental industry will be discussed with special focus on additive manufacturing (3D printing) of dental restorations. Up to now, subtractive manufacturing methods are state of the art for production of monolithic restorations. Here, the challenges and opportunities currently existing for 3D printing of crowns and bridges will be evaluated. Recent Findings Over the last 10 years, the LCM technology has evolved to the state of the art 3D printing technique for dense and precise ceramics. A case study will present here the full digital workflow from acquiring the data of the patient to manufacturing the final restoration. Summary It can be shown that with the LCM technology, it is possible to manufacture highly accurate parts with exceptional good surface quality. Furthermore, it can be shown that established techniques for staining and glazing conventionally manufactured restorations are also perfectly suitable for parts manufactured by means of the LCM technology. Particularly attractive restorations and outstanding reproduction of the sharp-edged crown margins are possible, together with the exact reproduction of the occlusal surfaces with sharp and natural replication of the fissures.

New nanomaterials are leading to a range of emerging dental treatments that utilize more biomimetic materials that more closely duplicate natural tooth structure (or bone, in the case of implants). The use of nanostructures that will work in harmony with the body's own regenerative processes (eg, to restore tooth structure or alveolar bone) are moving into clinical practice. This book brings together an international team of experts from the fields of nanomaterials, biomedical engineering and dentistry, to cover the new materials and techniques with potential for use intra-orally or extra-orally for the restoration, fixation, replacement, or regeneration of hard and soft tissues in and about the oral cavity and craniofacial region. New dental nanotechnologies include the use of advanced inorganic and organic materials, smart and biomimetic materials, tissue engineering and drug delivery strategies. Book prepared by an interdisciplinary and international group of bio-nanomaterial scientists and dental/oral biomedical researchersComprehensive professional reference for the subject covering materials fabrication and use of materials for all major diagnostic and therapeutic dental applications - repair,restoration, regeneration, implants and preventionBook focuses in depth on the materials manufacturing processes involved with emphasis on pre-clinical and clinical applications, use and biocompatibility

Background/Objectives: This study evaluates students’ awareness and perceptions of interdisciplinary education. It focuses specifically on digital dentistry among students in the Department of Dental Technology. The findings aim to support the development of interdisciplinary courses and programs to enhance students’ skills in response to the growing digitalization of dental healthcare. Methods: A cross-sectional survey was conducted using a 23-item online questionnaire administered to a total of 203 students to collect data on general characteristics, perceptions of interdisciplinary education, the perceived necessity of such education, and the demand for interdisciplinary training, including topics related to CAD/CAM and 3D printing technologies. A t-test was performed to analyze grade-level differences in perceptions. Correlation analysis was conducted between perceptions and digital dental laboratory technology skills. Results: Despite the relatively low level of awareness regarding interdisciplinary education, students expressed a strong perceived need for it. A total of 76.6% of respondents preferred to collaborate with the Department of Dental Hygiene. No clear link exists between students’ perceptions of interdisciplinary education and their digital dental competencies. Practical training is more important than awareness. A significant difference in competencies was seen between lower- and higher-year students, indicating that advanced programs for higher-year students may be effective. Conclusions: Clear guidance on interdisciplinary education can enhance student understanding and acceptance. Interdisciplinary education with the dental hygiene department may increase engagement.

Digital equipment in all dental practices is commonplace. From digital imaging through electronic recordkeeping, general dentists and specialists are seeing more accurate diagnoses, faster treatment times, and lower costs for equipment. Here in one volume is a comprehensive look at the digital technology available, describing indications, contraindications, advantages, disadvantages, limitations, and applications in the various dental fields. Included are digital imaging, digital impressions, digital operative dentistry, digital prosthodontics, digital implant fabrication and placement, and digital applications in endodontics, orthodontics, and oral surgery. The book is ideal for dental students seeking a reference for digital dental technology and for seasoned practitioners and specialists interested in incorporating digital technology in their daily practice.

Purpose of Review With the advent of CAD-CAM technology, it is essential to examine factors that affect outcomes of restorations fabricated by the new methodologies. Recent Findings This report assesses and compares ceramic crown fabrication systems to determine what factors affect marginal fit and provide solutions for better outcomes. Summary The review revealed key scientific evidence about what factors influence the marginal fit of CAD-CAM ceramic restorations. Solutions were recommended to help the clinician achieve greater long-term success when providing this treatment to their patients. The dental microscope enables the dental practitioner to achieve improved clinical outcomes in all phases of restorative dentistry, especially CAD-CAM restorations.