Explore the vast range of titles available.

This paper evaluates the technical aspects of grid-connected photovoltaic (PV) systems and distributed energy resources (DERs) interconnection grid codes. The advanced functions of smart PV inverters and smart grid solutions are discussed as well as the gaps of the existing grid codes that hinder DER ancillary services. An online survey targeted the key stakeholders and industry experts have been conducted to investigate advanced inverters potential of providing DER ancillary services to distribution grids. The survey results are discussed in details and recommendations for the reactive power support of DER inverters and DER interconnection codes enhancements are presented.

Under the increasing penetration of distributed energy resources and new smart network technologies, distribution utilities face new challenges and opportunities to ensure reliable operations, manage service quality, and reduce operational and investment costs. Simultaneously, the research community is developing algorithms for advanced controls and distribution automation that can help to address some of these challenges. However, there is a shortage of realistic test systems that are publically available for development, testing, and evaluation of such new algorithms. Concerns around revealing critical infrastructure details and customer privacy have severely limited the number of actual networks published and that are available for testing. In recent decades, several distribution test feeders and US-featured representative networks have been published, but the scale, complexity, and control data vary widely. This paper presents a first-of-a-kind structured literature review of published distribution test networks with a special emphasis on classifying their main characteristics and identifying the types of studies for which they have been used. This both aids researchers in choosing suitable test networks for their needs and highlights the opportunities and directions for further test system development. In particular, we highlight the need for building large-scale synthetic networks to overcome the identified drawbacks of current distribution test feeders.

The increasing prevalence and severity of wildfires, severe storms, and cyberattacks is driving the introduction of numerous microgrids to improve resilience locally. While distributed energy resources (DERs), such as small-scale wind and solar photovoltaics with storage, will be major components in future microgrids, today, the majority of microgrids are backed up with fossil-fuel-based generators. Small modular reactors (SMRs) can form synergistic mix with DERs due to their ability to provide baseload and flexible power. The heat produced by SMRs can also fulfill the heating needs of microgrid consumers. This paper discusses an operational scheme based on distributed control of flexible power assets to strengthen the operational resilience of SMR-DER integrated-energy microgrids. A framework is developed to assess the operational resilience of SMR-DER microgrids in terms of system adaptive real-power capacity quantified as a response area metric (RAM). Month-long simulation results are shown with a microgrid developed in a modified Institute of Electrical and Electronics Engineers (IEEE)-30 bus system. The RAM values calculated along the operational simulation reflect the system resilience in real time and can be used to supervise the microgrid operation and reactor’s autonomous control.

The share of renewable and distributed energy resources (DERs), like wind turbines, solar photovoltaics and grid-connected batteries, interconnected to the electric grid is rapidly increasing due to reduced costs, rising efficiency, and regulatory requirements aimed at incentivizing a lower-carbon electricity system. These distributed energy resources differ from traditional generation in many ways including the use of many smaller devices connected primarily (but not exclusively) to the distribution network, rather than few larger devices connected to the transmission network. DERs being installed today often include modern communication hardware like cellular modems and WiFi connectivity and, in addition, the inverters used to connect these resources to the grid are gaining increasingly complex capabilities, like providing voltage and frequency support or supporting microgrids. To perform these new functions safely, communications to the device and more complex controls are required. The distributed nature of DER devices combined with their network connectivity and complex controls interfaces present a larger potential attack surface for adversaries looking to create instability in power systems. To address this area of concern, the steps of a cyberattack on DERs have been studied, including the security of industrial protocols, the misuse of the DER interface, and the physical impacts. These different steps have not previously been tied together in practice and not specifically studied for grid-connected storage devices. In this work, we focus on grid-connected batteries. We explore the potential impacts of a cyberattack on a battery to power system stability, to the battery hardware, and on economics for various stakeholders. We then use real hardware to demonstrate end-to-end attack paths exist when security features are disabled or misconfigured. Our experimental focus is on control interface security and protocol security, with the initial assumption that an adversary has gained access to the network to which the device is connected. We provide real examples of the effectiveness of certain defenses. This work can be used to help utilities and other grid-connected battery owners and operators evaluate the severity of different threats and the effectiveness of defense strategies so they can effectively deploy and protect grid-connected storage devices.

The growth of distributed power generation using renewable energy sources has led to the development of new-generation power electronic converters. This is because DC–DC converters and inverters form the fundamental building blocks in numerous applications, which include renewable integrations, energy harvesting, and transportation. Additionally, they play a vital role in microgrid applications. The deployment of distributed energy resources (DERs) with renewable sources such as solar has paved the way for microgrid support systems, thus forming an efficient electric grid. To enhance the voltage of such sources and to integrate them into the grid, high-gain DC–DC converters and inverter circuits are required. In this paper, a novel single-switch high-gain converter (HG-SIQBC) with quadratic voltage gain and wide controllable range of load is proposed, the output of which is fed to a modified multilevel inverter for conversion of voltage. The overall performance of the newly designed converter and inverter is analyzed and compared with the existing topologies. A prototype of the investigated multilevel inverter is designed and tested in the laboratory. Development and testing of such novel topologies have become the need of the hour as the grid becomes smarter with increased penetration of distributed resources.

With the growing penetration of distributed energy resources (DER), the accompanying challenges have led utilities to limit the hosting capacities of DER installations on distribution feeders. A distribution static synchronous compensator (DSTATCOM) is a power electronic device to provide dynamic injections and absorption of reactive power into the distribution grid with more flexible and reliable voltage control and power quality improvement. A distributed energy resources management system (DERMS) is developed to provide more effective control of a DSTATCOM that can help substantially increase hosting capacity and mitigate overvoltage problems with the existing feeder. A Taiwan power company’s (Taipower) feeder is selected for computer simulation, and the DSTATCOM is employed in the test feeder to demonstrate the effectiveness of the DSTATCOM in improving the overvoltage problems. The voltage/reactive power (Volt/VAR) control of the DSTATCOM helps reduce overvoltage/voltage fluctuations as the DER output increases.

Increasing penetrations of interoperable distributed energy resources (DER) in the electric power system are expanding the power system attack surface. Maloperation or malicious control of DER equipment can now cause substantial disturbances to grid operations. Fortunately, many options exist to defend and limit adversary impact on these newly‐created DER communication networks, which typically traverse the public internet. However, implementing these security features will increase communication latency, thereby adversely impacting real‐time DER grid support service effectiveness. In this work, a collection of software tools called SCEPTRE was used to create a co‐simulation environment where SunSpec‐compliant photovoltaic inverters were deployed as virtual machines and interconnected to simulated communication network equipment. Network segmentation, encryption, and moving target defence security features were deployed on the control network to evaluate their influence on cybersecurity metrics and power system performance. The results indicated that adding these security features did not impact DER‐based grid control systems but improved the cybersecurity posture of the network when implemented appropriately.

The electric vehicle (EV) industry has emerged in response to the necessity of reducing greenhouse gas emissions and combating climate change. However, as the number of EVs increases, EV charging networks are confronted with considerable obstacles pertaining to accessibility, charging time, and the equilibrium between electricity demand and supply. In this paper, we present a techno-economic analysis of EV charging stations (EVCSs) by building type. This analysis is based on public EVCS data and considers both standalone local grid operation and integrated operation of distributed energy resources (DERs) and the local grid. The analysis has significant implications for the management of the electricity grid and the utilization of sustainable energy, and can result in economic benefits for both residential, commercial, and public buildings. The analysis indicates that integrating DERs with the local grid at EV charging stations can reduce local grid usage relative to EV demand. Nevertheless, there are also complexities, such as initial investment and maintenance costs, especially the weather-dependent performance variability of solar, which require financial support mechanisms, such as subsidies or tax incentives. Future research should focus on different DER integrations, regional and seasonal variability, user behavior, installation location, policy and regulatory impacts, and detailed capital expenditure analysis. Such research will advance DER and EVCS integration and contribute to increasing the efficiency and sustainability of urban energy systems.

Technology advancement in power–electronic interfaces and their evolution open an opportunity to end-users to benefit from their newfound capability. For the end-users, power–electronic interfaces can act as Distributed Energy Resources (DERs) for reactive power injection and absorption. If these power–electronic interface capabilities can be properly integrated into traditional utility system operations, they can be used as beneficial tools for distribution management and voltage profile enhancement. Considering the present distribution system, it is not possible to communicate to all DERs. In this paper, we considered two proposed residential-control and droop-control methods. The multi-criteria decision-making technique (MCDM), along with fuzzy theory, was used to prioritize candidate buses for their participation in the Volt-VAR program. In this paper, the contribution of active DERs in reactive power compensation was evaluated.

A distributed energy resource (DER) system, which can be defined as a medium or small energy conversion and utilization system with various functions for meeting multiple targets, is directly oriented towards users and achieves on-site production and energy supply according to users’ demands. Optimization research on system construction has recently become an important issue. In this paper, simple stochastic mathematical equations were used to interpret the optimal design problem of a DER system, and based on this, a novel method for solving the optimization problem, which has multi-dimensional stochastic uncertainties (involving the price of input-energy and energy supply and demand), was put forward. A mixed-integer linear programming (MILP) model was established for the optimal design of the DER system by combining the ideas of mean value and variance, aiming to minimize the total costs, including facility costs, energy purchase costs, and loss caused by energy supply shortage, and considering the energy balance and facility performance constraints. In the end, a DER system design for an office building district in Xuzhou, China, was taken as an example to verify the model. The influences of uncertainty on the selection of system facilities and the economic evaluation were analyzed. The result indicated that uncertainty of energy demand played a significant role in optimal design, whereas energy price played a negligible role. With respect to economy, if uncertainties are not considered in system design, it will result in a short supply, and therefore the total cost will increase considerably. The calculation convergence was compared with previous work. The implementation results showed the practicality and efficiency of the proposed method.