Explore the vast range of titles available.

Rapid uptake of nanoparticles by mononuclear phagocyte system (MPS) significantly hampers their therapeutic efficacy. Temporal MPS blockade is one of the few ways to overcome this barrier – the approach rediscovered many times under different names but never extensively used in clinic. Using meta-analysis of the published data we prove the efficacy of this technique for enhancing particle circulation in blood and their delivery to tumours, describe a century of its evolution and potential combined mechanism behind it. Finally, we discuss future directions of the research focusing on the features essential for successful clinical translation of the method. Temporal blockade of the mononuclear phagocyte system is an approach to enhance the therapeutic efficiency of nanocarrier drug-delivery systems but the broad applicability is hindered by the complexity of optimisation and management of potential side effects. Here, the authors review the development of this technique and show its efficiency using meta-analysis of the published data and discuss essential features for its successful translation to clinic.

The success of protein, peptide and antibody based therapies is evident - the biopharmaceuticals market is predicted to reach $388 billion by 2024 [1], and more than half of the current top 20 blockbuster drugs are biopharmaceuticals. However, the intrinsic properties of biopharmaceuticals has restricted the routes available for successful drug delivery. While providing 100% bioavailability, the intravenous route is often associated with pain and needle phobia from a patient perspective, which may translate as a reluctance to receive necessary treatment. Several non-invasive strategies have since emerged to overcome these limitations. One such strategy involves the use of microneedles (MNs), which are able to painlessly penetrate the stratum corneum barrier to dramatically increase transdermal drug delivery of numerous drugs. This review reports the wealth of studies that aim to enhance transdermal delivery of biopharmaceutics using MNs. The true potential of MNs as a drug delivery device for biopharmaceuticals will not only rely on acceptance from prescribers, patients and the regulatory authorities, but the ability to upscale MN manufacture in a cost-effective manner and the long term safety of MN application. Thus, the current barriers to clinical translation of MNs, and how these barriers may be overcome are also discussed.

Background The study aimed to assess 52-week efficacy and safety of secukinumab self-administration by autoinjector in patients with active psoriatic arthritis (PsA) in the FUTURE 3 study ( ClinicalTrials.gov NCT01989468). Methods Patients (≥ 18 years of age; N = 414) with active PsA were randomized 1:1:1 to subcutaneous (s.c.) secukinumab 300 mg, 150 mg, or placebo at baseline, weeks 1, 2, 3, and 4, and every 4 weeks thereafter. Per clinical response, placebo-treated patients were re-randomized to s.c. secukinumab 300 or 150 mg at week 16 (nonresponders) or week 24 (responders) and stratified at randomization by prior anti-tumor necrosis factor (TNF) therapy (anti-TNF-naïve, 68.1%; intolerant/inadequate response (anti-TNF-IR), 31.9%). The primary endpoint was the proportion of patients achieving at least 20% improvement in American College of Rheumatology response criteria (ACR20) at week 24. Autoinjector usability was evaluated by Self-Injection Assessment Questionnaire (SIAQ). Results Overall, 92.1% (300 mg), 91.3% (150 mg), and 93.4% (placebo) of patients completed 24 weeks, and 84.9% (300 mg) and 79.7% (150 mg) completed 52 weeks. In the overall population (combined anti-TNF-naïve and anti-TNF-IR), ACR20 response rate at week 24 was significantly higher in secukinumab groups (300 mg, 48.2% ( p < 0.0001); 150 mg, 42% ( p < 0.0001); placebo, 16.1%) and was sustained through 52 weeks. SIAQ results showed that more than 93% of patients were satisfied/very satisfied with autoinjector usage. Secukinumab was well tolerated with no new or unexpected safety signals reported. Conclusions Secukinumab provided sustained improvements in signs and symptoms in active PsA patients through 52 weeks. High acceptability of autoinjector was observed. The safety profile was consistent with that reported previously. Trial registration ClinicalTrials.gov NCT01989468 . Registered 21 November 2013. EudraCT 2013–004002-25 . Registered 17 December 2013.

A biodegradable drug delivery system (DDS) is one the most promising therapeutic strategies for cancer therapy. Here, we propose a unique concept of light activation of black phosphorus (BP) at hydrogel nanostructures for cancer therapy. A photosensitizer converts light into heat that softens and melts drug-loaded hydrogelbased nanostructures. Drug release rates can be accurately controlled by light intensity, exposure duration, BP concentration, and hydrogel composition. Owing to sufficiently deep penetration of near-infrared (NIR) light through tissues, our BP-based system shows high therapeutic efficacy for treatment of s.c. cancers. Importantly, our drug delivery system is completely harmless and degradable in vivo. Together, our work proposes a unique concept for precision cancer therapy by external light excitation to release cancer drugs. If these findings are successfully translated into the clinic, millions of patients with cancer will benefit from our work.

This review focuses on key topics in the field of drug delivery related to the design of nanocarriers answering the biomedicine criteria, including biocompatibility, biodegradability, low toxicity, and the ability to overcome biological barriers. For these reasons, much attention is paid to the amphiphile-based carriers composed of natural building blocks, lipids, and their structural analogues and synthetic surfactants that are capable of self-assembly with the formation of a variety of supramolecular aggregates. The latter are dynamic structures that can be used as nanocontainers for hydrophobic drugs to increase their solubility and bioavailability. In this section, biodegradable cationic surfactants bearing cleavable fragments are discussed, with ester- and carbamate-containing analogs, as well as amino acid derivatives received special attention. Drug delivery through the biological barriers is a challenging task, which is highlighted by the example of transdermal method of drug administration. In this paper, nonionic surfactants are primarily discussed, including their application for the fabrication of nanocarriers, their surfactant-skin interactions, the mechanisms of modulating their permeability, and the factors controlling drug encapsulation, release, and targeted delivery. Different types of nanocarriers are covered, including niosomes, transfersomes, invasomes and chitosomes, with their morphological specificity, beneficial characteristics and limitations discussed.

Various drug delivery approaches can be used to maximize therapeutic efficacy and minimize side effects, by impacting absorption, distribution, metabolism, and elimination (ADME) of a drug compound. For those drugs with poor water solubility or low permeability, techniques such as amorphous solid dispersion, liposomes, and complexations have been used to improve their oral bioavailability. Modified release (MR) formulations have been widely used to improve patient compliance, as well as to reduce side effects, especially for those drugs with short half-lives or narrow therapeutic windows. More than ten drugs using sterile long-acting release (LAR) formulations with clear clinical benefit have been successfully marketed. Furthermore, drug delivery systems have been used in delaying drug clearance processes. Additionally, modifying the in vivo drug distribution using targeted delivery systems has significantly improved oncology treatments. All the drug delivery approaches have their advantages and limitations. For both brand and generic drugs, the achievement of consistent quality and therapeutic performance using drug delivery systems can also pose serious challenges in developing a drug for the market, which requires close collaboration among industry, academia, and regulatory agencies. With the advent of personalized medicines, there will be great opportunities and challenges in utilizing drug delivery systems to provide better products and services for patients.

The oral route is the most preferred route for systemic and local drug delivery. However, the oral drug delivery system faces the harsh physiological and physicochemical environment of the gastrointestinal tract, which limits the bioavailability and targeted design of oral drug delivery system. Innovative pharmaceutical approaches including nanoparticulate formulations, biomimetic drug formulations, and microfabricated devices have been explored to optimize drug targeting and bioavailability. In this review, the anatomical factors, biochemical factors, and physiology factors that influence delivering drug via oral route are discussed and recent advance in conventional and novel oral drug delivery approaches for improving drug bioavailability and targeting ability are highlighted. We also address the challenges and opportunities of oral drug delivery systems in future.

In recent years, the development of nanoparticles has expanded into a broad range of clinical applications. Nanoparticles have been developed to overcome the limitations of free therapeutics and navigate biological barriers — systemic, microenvironmental and cellular — that are heterogeneous across patient populations and diseases. Overcoming this patient heterogeneity has also been accomplished through precision therapeutics, in which personalized interventions have enhanced therapeutic efficacy. However, nanoparticle development continues to focus on optimizing delivery platforms with a one-size-fits-all solution. As lipid-based, polymeric and inorganic nanoparticles are engineered in increasingly specified ways, they can begin to be optimized for drug delivery in a more personalized manner, entering the era of precision medicine. In this Review, we discuss advanced nanoparticle designs utilized in both non-personalized and precision applications that could be applied to improve precision therapies. We focus on advances in nanoparticle design that overcome heterogeneous barriers to delivery, arguing that intelligent nanoparticle design can improve efficacy in general delivery applications while enabling tailored designs for precision applications, thereby ultimately improving patient outcome overall.Advances in nanoparticle design could make substantial contributions to personalized and non-personalized medicine. In this Review, Langer, Mitchell, Peppas and colleagues discuss advances in nanoparticle design that overcome heterogeneous barriers to delivery, as well as the challenges in translating these design improvements into personalized medicine approaches.

Key Points This Analysis article describes the compilation and analysis of combined data on the attrition of drug candidates from AstraZeneca, Eli Lilly and Company, GlaxoSmithKline and Pfizer. The analysis reaffirms that control of physicochemical properties during compound optimization is beneficial in identifying compounds of candidate drug quality. Safety and toxicology are the largest sources of failure within the data set. The link between calculated physicochemical properties and frequent causes of attrition (preclinical toxicology, clinical safety and human pharmacokinetics) is assessed. Analysis of this data set shows that none of the physicochemical descriptors we examined correlates with preclinical toxicology outcomes. This work is the first to indicate a link between lipophilicity and clinical failure owing to safety issues. The utility of this finding in a prospective sense is discussed. Although control of physicochemical properties is clearly important, this analysis suggests that further stringency in this respect is unlikely to have a significant effect on attrition in development and that additional work is required to address safety-related failures. Attempts to reduce the number of efficacy- and safety-related failures that may be linked to the physicochemical properties of small-molecule drug candidates have been inconclusive owing to the limited size of data sets from individual companies. Waring and colleagues analyse the largest data set compiled so far on the causes of attrition for oral, small-molecule drug candidates, derived from a pioneering data-sharing effort by AstraZeneca, Eli Lilly and Company, GlaxoSmithKline and Pfizer. The pharmaceutical industry remains under huge pressure to address the high attrition rates in drug development. Attempts to reduce the number of efficacy- and safety-related failures by analysing possible links to the physicochemical properties of small-molecule drug candidates have been inconclusive because of the limited size of data sets from individual companies. Here, we describe the compilation and analysis of combined data on the attrition of drug candidates from AstraZeneca, Eli Lilly and Company, GlaxoSmithKline and Pfizer. The analysis reaffirms that control of physicochemical properties during compound optimization is beneficial in identifying compounds of candidate drug quality and indicates for the first time a link between the physicochemical properties of compounds and clinical failure due to safety issues. The results also suggest that further control of physicochemical properties is unlikely to have a significant effect on attrition rates and that additional work is required to address safety-related failures. Further cross-company collaborations will be crucial to future progress in this area.