Explore the vast range of titles available.

Improved crop genotypes are constantly introduced . However, information on their nutritional quality is generally limited. The present study reports the proximate composition and the concentration and relative bioavailability of minerals of improved finger millets of different genotypes. Grains of finger millet genotypes (n = 15) grown in research station during 2019 and 2020 in Ethiopia, and replicated three times in a randomized complete block design, were analysed for proximate composition, mineral concentration (iron, zinc, calcium, selenium), and antinutritional factors (phytate, tannin and oxalate). Moreover, the antinutritional factors to mineral molar ratio method was used to estimate mineral bioavailability. The result shows a significant genotypic variation in protein, fat and fibre level, ranging from 10% to 14.6%, 1.0 to 3.8%, and 1.4 to 4.6%, respectively. Similarly, different finger millets genotypes had significantly different mineral concentrations ranging from 3762 ± 332 to 5893 ± 353 mg kg −1 for Ca, 19.9 ± 1.6 to 26.2 ± 2.7 mg kg −1 for Zn, 36.3 ± 4.6 to 52.9 ± 9.1 mg kg −1 for Fe and 36.6 ± 11 to 60.9 ± 22 µg kg −1 for Se. Phytate (308–360 µg g −1 ), tannin (0.15–0.51 mg g −1 ) and oxalate (1.26–4.41 mg g −1 ) concentrations were also influenced by genotype. Antinutritional factors to minerals molar ratio were also significantly different by genotypes but were below the threshold for low mineral bioavailability. Genotype significantly influenced mineral and antinutritional concentrations of finger millet grains. In addition, all finger millet genotypes possess good mineral bioavailability. Especially, the high Ca concentration in finger millet, compared to in other cereals, could play a vital role to combating Ca deficiency. The result suggests the different finger millet genotypes possess good nutrient content and may contribute to the nutrition security of the local people.

Spatial variation and genotype by environment (GxE) interaction are common in varietal selection field trials and pose a significant challenge for plant breeders when comparing the genetic potential of different varieties. Efficient statistical methods must be employed for the evaluation of finger millet breeding trials to accurately select superior varieties that contribute to agricultural productivity. The objective of this study was to improve selection strategies in finger millet breeding in Ethiopia through modeling of spatial field trends and the GxE interaction. A dataset of seven multi-environment trials (MET) conducted in randomized complete block design (RCBD) with two replications laid out in rectangle (row x column) arrays of plots was used in this study. The results revealed that, under the linear mixed model, the spatial and factor analytic (FA) models were efficient methods of data analysis for this study, and this was demonstrated with evidence of heritability measure. We found two clusters of correlated environments that helped to select superior and stable varieties through ranking average Best Linear Unbiased Predictors (BLUPs) within clusters. The first cluster was chosen because it contained a greater number of environments with high heritability. Based on this cluster, Bako-09, 203439, 203325, and 203347 were the top four varieties with relatively high yield performance and stability across correlated environments. Hence, scaling up the use of this efficient analysis method will improve the selection of superior finger millet varieties.

Background Finger millet ( Eleusine coracana (L.) Gaertn.) is an important staple food crop widely grown in Africa and South Asia. Among the millets, finger millet has high amount of calcium, methionine, tryptophan, fiber, and sulphur containing amino acids. In addition, it has C4 photosynthetic carbon assimilation mechanism, which helps to utilize water and nitrogen efficiently under hot and arid conditions without severely affecting yield. Therefore, development and utilization of genomic resources for genetic improvement of this crop is immensely useful. Results Experimental results from whole genome sequencing and assembling process of ML-365 finger millet cultivar yielded 1196 Mb covering approximately 82% of total estimated genome size. Genome analysis showed the presence of 85,243 genes and one half of the genome is repetitive in nature. The finger millet genome was found to have higher colinearity with foxtail millet and rice as compared to other Poaceae species. Mining of simple sequence repeats (SSRs) yielded abundance of SSRs within the finger millet genome. Functional annotation and mining of transcription factors revealed finger millet genome harbors large number of drought tolerance related genes. Transcriptome analysis of low moisture stress and non-stress samples revealed the identification of several drought-induced candidate genes, which could be used in drought tolerance breeding. Conclusions This genome sequencing effort will strengthen plant breeders for allele discovery, genetic mapping, and identification of candidate genes for agronomically important traits. Availability of genomic resources of finger millet will enhance the novel breeding possibilities to address potential challenges of finger millet improvement.

Glyphosate is the most important and widely used herbicide in world agriculture. Intensive glyphosate selection has resulted in the widespread evolution of glyphosate-resistant weed populations, threatening the sustainability of this valuable once-in-a-century agrochemical. Field-evolved glyphosate resistance due to known resistance mechanisms is generally low to modest. Here, working with a highly glyphosate-resistant Eleusine indica population, we identified a double amino acid substitution (T102I + P106S [TIPS]) in the 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) gene in glyphosate-resistant individuals. This TIPS mutation recreates the biotechnology-engineered commercial first generation glyphosate-tolerant EPSPS in corn (Zea mays) and now in other crops. In E. indica, the naturally evolved TIPS mutants are highly (more than 180-fold) resistant to glyphosate compared with the wild type and more resistant (more than 32-fold) than the previously known P106S mutants. The E. indica  TIPS  EPSPS showed very high-level (2,647-fold) in vitro resistance to glyphosate relative to the wild type and is more resistant (600-fold) than the P106S variant. The evolution of the TIPS mutation in crop fields under glyphosate selection is likely a sequential event, with the P106S mutation being selected first and fixed, followed by the T102I mutation to create the highly resistant TIPS  EPSPS. The sequential evolution of the TIPS mutation endowing high-level glyphosate resistance is an important mechanism by which plants adapt to intense herbicide selection and a dramatic example of evolution in action.

Finger millet (Eleusine coracana L. Gaertn) is an important minor millet for food and nutritional security in semi-arid regions of the world. The crop has wide adaptability and can be grown right from high hills in Himalayan region to coastal plains. It provides food grain as well as palatable straw for cattle, and is fairly climate resilient. The crop has large gene pool with distinct features of both Indian and African germplasm types. Interspecific hybridization between Indian and African germplasm has resulted in greater yield enhancement and disease resistance. The crop has shown numerous advantages over major cereals in terms of stress adaptation, nutritional quality and health benefits. It has indispensable repository of novel genes for the benefits of mankind. Although rapid strides have been made in allele mining in model crops and major cereals, the progress in finger millet genomics is lacking. Comparative genomics have paved the way for the marker-assisted selection, where resistance gene homologues of rice for blast and sequence variants for nutritional traits from other cereals have been invariably used. Transcriptomics studies have provided preliminary understanding of the nutritional variation, drought and salinity tolerance. However, the genetics of many important traits in finger millet is poorly understood and need systematic efforts from biologists across disciplines. Recently, deciphered finger millet genome will enable identification of candidate genes for agronomically and nutritionally important traits. Further, improvement in genome assembly and application of genomic selection as well as genome editing in near future will provide plethora of information and opportunity to understand the genetics of complex traits.

Finger millet is a key food security crop widely grown in eastern Africa, India and Nepal. Long considered a ‘poor man’s crop’, finger millet has regained attention over the past decade for its climate resilience and the nutritional qualities of its grain. To bring finger millet breeding into the 21st century, here we present the assembly and annotation of a chromosome-scale reference genome. We show that this ~1.3 million years old allotetraploid has a high level of homoeologous gene retention and lacks subgenome dominance. Population structure is mainly driven by the differential presence of large wild segments in the pericentromeric regions of several chromosomes. Trait mapping, followed by variant analysis of gene candidates, reveals that loss of purple coloration of anthers and stigma is associated with loss-of-function mutations in the finger millet orthologs of the maize R1/B1 and Arabidopsis GL3/EGL3 anthocyanin regulatory genes. Proanthocyanidin production in seed is not affected by these gene knockouts.

The major limiting factor for production and productivity of finger millet crop is blast disease caused by Magnaporthe grisea. Since, the genome sequence information available in finger millet crop is scarce, comparative genomics plays a very important role in identification of genes/QTLs linked to the blast resistance genes using SSR markers. In the present study, a total of 58 genic SSRs were developed for use in genetic analysis of a global collection of 190 finger millet genotypes. The 58 SSRs yielded ninety five scorable alleles and the polymorphism information content varied from 0.186 to 0.677 at an average of 0.385. The gene diversity was in the range of 0.208 to 0.726 with an average of 0.487. Association mapping for blast resistance was done using 104 SSR markers which identified four QTLs for finger blast and one QTL for neck blast resistance. The genomic marker RM262 and genic marker FMBLEST32 were linked to finger blast disease at a P value of 0.007 and explained phenotypic variance (R²) of 10% and 8% respectively. The genomic marker UGEP81 was associated to finger blast at a P value of 0.009 and explained 7.5% of R². The QTLs for neck blast was associated with the genomic SSR marker UGEP18 at a P value of 0.01, which explained 11% of R². Three QTLs for blast resistance were found common by using both GLM and MLM approaches. The resistant alleles were found to be present mostly in the exotic genotypes. Among the genotypes of NW Himalayan region of India, VHC3997, VHC3996 and VHC3930 were found highly resistant, which may be effectively used as parents for developing blast resistant cultivars in the NW Himalayan region of India. The markers linked to the QTLs for blast resistance in the present study can be further used for cloning of the full length gene, fine mapping and their further use in the marker assisted breeding programmes for introgression of blast resistant alleles into locally adapted cultivars.

Genomic structural variation (SV) has profound effects on organismal evolution; often serving as a source of novel genetic variation. Gene copy number variation (CNV), one type of SV, has repeatedly been associated with adaptive evolution in eukaryotes, especially with environmental stress. Resistance to the widely used herbicide, glyphosate, has evolved through target-site CNV in many weedy plant species, including the economically important grass, Eleusine indica (goosegrass); however, the origin and mechanism of these CNVs remain elusive in many weed species due to limited genetic and genomic resources. To study this CNV in goosegrass, we present high-quality reference genomes for glyphosate-susceptible and -resistant goosegrass lines and fine-assembles of the duplication of glyphosate’s target site gene 5-enolpyruvylshikimate-3-phosphate synthase ( EPSPS ). We reveal a unique rearrangement of EPSPS involving chromosome subtelomeres. This discovery adds to the limited knowledge of the importance of subtelomeres as genetic variation generators and provides another unique example for herbicide resistance evolution. Resistance to herbicide glyphosate can be evolved trough copy number variation (CNV) of its target gene EPSPS in goosegrass. Here, the authors assemble the genomes of glyphosate susceptible and resistance lines and provide evidence of sub-telomeric-repeat driven CNV of EPSPS could lead to glyphosate resistance.

Finger millet (Eleusine coracana L.) is a hardy cereal known for its superior level of tolerance against drought, salinity, diseases and its nutritional properties. In this study, attempts were made to unravel the physiological and molecular basis of salinity tolerance in two contrasting finger millet genotypes viz., CO 12 and Trichy 1. Physiological studies revealed that the tolerant genotype Trichy 1 had lower Na⁺ to K⁺ ratio in leaves and shoots, higher growth rate (osmotic tolerance) and ability to accumulate higher amount of total soluble sugar in leaves under salinity stress. We sequenced the salinity responsive leaf transcriptome of contrasting finger millet genotypes using IonProton platform and generated 27.91 million reads. Mapping and annotation of finger millet transcripts against rice gene models led to the identification of salinity responsive genes and genotype specific responses. Several functional groups of genes like transporters, transcription factors, genes involved in cell signaling, osmotic homeostasis and biosynthesis of compatible solutes were found to be highly up-regulated in the tolerant Trichy 1. Salinity stress inhibited photosynthetic capacity and photosynthesis related genes in the susceptible genotype CO 12. Several genes involved in cell growth and differentiation were found to be up-regulated in both the genotypes but more specifically in tolerant genotype. Genes involved in flavonoid biosynthesis were found to be down-regulated specifically in the salinity tolerant Trichy 1. This study provides a genome-wide transcriptional analysis of two finger millet genotypes differing in their level of salinity tolerance during a gradually progressing salinity stress under greenhouse conditions.

Finger millet (Eleusine coracana subsp. coracana) (2n = 4x = 36) remains one of the most important millets in East Africa (EA), where it was most likely domesticated along the highlands of Ethiopia and Uganda. The goal of the current study was to understand the population structure of the Ethiopian finger millet landraces and identify quantitative trait nucleotides (QTNs) and haplotypes associated with agronomic and nutritional traits. In a field evaluation across three environments, 448 genotypes were assessed for days to flowering (DTF), days to maturity (DTM), thousand seed weight (TSW), grain yield (GY), stay-green score (STG), and drought score (DrtSc). The harvested grain was analyzed for Fe and Zn contents. A subset of 391 genotypes was skim-sequenced, generating 24,112 high-quality SNPs that were employed for population structure, association mapping, and haplotype analysis. Seventy marker-trait associations were detected including 15 major QTNs with more than 30% phenotypic variance explained (PVE) for all traits except STG and GY. Pleiotropic major QTNs were identified for DTM/DTF and Fe/Zn on chromosomes 9B and 2B, respectively. Haplotype analysis of major QTNs identified 54 significant haplotype blocks and 2 additional haplotypes for a multidrug ABC transporter gene family like protein on chromosome 4A that was associated with PTH. Favorable haplotypes from pleiotropic DTM/DTF and Fe/Zn QTNs were present in 13 and 12 genotypes respectively, majority from Tigray region. Two genotypes from Tigray and one from Amhara harbored favorable haplotypes for DTM/DTF and Fe/Zn. These findings provide invaluable insights for targeted breeding to enhance finger millet resilience, nutritional profile, and yield.