Explore the vast range of titles available.

Analysis of changes in functional groups of species and potential drivers of environmental change for protected areas across the world’s major tropical regions reveals large variation between reserves that have been effective and those experiencing an erosion of biodiversity, and shows that environmental changes immediately outside reserves are nearly as important as those inside in determining their ecological fate. How to protect protected areas Protected areas are a key component of tropical forest conservation strategy, but how well are they performing? These authors assemble a large data set from 60 protected areas across the globe, assessing 31 functional groups of species and 21 drivers of environmental change. They find that about half of the reserves are succeeding but half are experiencing substantial losses of biodiversity, driven as much by environmental change outside the reserves as by change within them. To protect what remains of these habitats, the authors suggest that it is vital to establish sizeable buffer zones around reserves, maintain substantial reserve connectivity to other forest areas and promote low-impact land uses near reserves. The rapid disruption of tropical forests probably imperils global biodiversity more than any other contemporary phenomenon 1 , 2 , 3 . With deforestation advancing quickly, protected areas are increasingly becoming final refuges for threatened species and natural ecosystem processes. However, many protected areas in the tropics are themselves vulnerable to human encroachment and other environmental stresses 4 , 5 , 6 , 7 , 8 , 9 . As pressures mount, it is vital to know whether existing reserves can sustain their biodiversity. A critical constraint in addressing this question has been that data describing a broad array of biodiversity groups have been unavailable for a sufficiently large and representative sample of reserves. Here we present a uniquely comprehensive data set on changes over the past 20 to 30 years in 31 functional groups of species and 21 potential drivers of environmental change, for 60 protected areas stratified across the world’s major tropical regions. Our analysis reveals great variation in reserve ‘health’: about half of all reserves have been effective or performed passably, but the rest are experiencing an erosion of biodiversity that is often alarmingly widespread taxonomically and functionally. Habitat disruption, hunting and forest-product exploitation were the strongest predictors of declining reserve health. Crucially, environmental changes immediately outside reserves seemed nearly as important as those inside in determining their ecological fate, with changes inside reserves strongly mirroring those occurring around them. These findings suggest that tropical protected areas are often intimately linked ecologically to their surrounding habitats, and that a failure to stem broad-scale loss and degradation of such habitats could sharply increase the likelihood of serious biodiversity declines.

The linear production and consumption of plastics today is unsustainable. It creates large amounts of unnecessary and mismanaged waste, pollution and carbon dioxide emissions, undermining global climate targets and the Sustainable Development Goals. This Perspective provides an integrated technological, economic and legal view on how to deliver a circular carbon and plastics economy that minimizes carbon dioxide emissions. Different pathways that maximize recirculation of carbon (dioxide) between plastics waste and feedstocks are outlined, including mechanical, chemical and biological recycling, and those involving the use of biomass and carbon dioxide. Four future scenarios are described, only one of which achieves sufficient greenhouse gas savings in line with global climate targets. Such a bold system change requires 50% reduction in future plastic demand, complete phase-out of fossil-derived plastics, 95% recycling rates of retrievable plastics and use of renewable energy. It is hard to overstate the challenge of achieving this goal. We therefore present a roadmap outlining the scale and timing of the economic and legal interventions that could possibly support this. Assessing the service lifespan and recoverability of plastic products, along with considerations of sufficiency and smart design, can moreover provide design principles to guide future manufacturing, use and disposal of plastics. Four future greenhouse gas emission scenarios for the global plastics system are investigated, with the lead scenario achieving net-zero emissions, and a series of  technical, legal and economic interventions recommended.

The relationship between renewable energy consumption (REC), foreign direct investment (FDI) inflows, economic growth, and their resulting impact on CO2 emissions is widely discussed area in energy and environmental literature; however, there is an unseen literature on moderation and mediation effect of per capita income and FDI inflows with the renewable energy consumption on CO2 emissions in developing countries like Pakistan, which is being evaluated in this study by using a consistent time series data for a period of 1975–2016. The results show that economic growth and FDI inflows both increase CO2 emissions, while REC substantially decreases CO2 emissions during the study time period. The results do not support the inverted U-shaped Environmental Kuznets Curve (EKC) hypothesis for per capita income (and FDI inflows) and per capita CO2 emissions in a country. The results supported ‘pollution haven hypothesis’ where FDI inflows damage the natural flora of the country. By inclusion of moderation and mediation effect of per capita income and FDI inflows with the REC on CO2 emissions averted the positive impact of REC, and converted into negative externality, where environmental sustainability agenda is compromised by lower environmental regulations and unsustainable production techniques that increase country’s economic growth. The study concludes that by adding REC in existing energy portfolio may help to reduce CO2 emissions while strict environmental compliance may disregard the negative externality of unsustainable production and it will support to achieve green development programmes in a country.

The paper investigates the effect of financial development and institutional quality on the environment in South Asia. Other determinants of environmental quality included are economic growth, energy consumption, FDI, trade openness and institutional quality. For empirical analysis, panel data is used for the period 1984 to 2015. The estimated results indicate that Environmental Kuznet Curve (EKC) hypothesis holds in South Asia, i.e., environment first deteriorates with economic development and then it starts improving. Empirical results reveal that 1% increase in economic growth worsens environment by 1.709%. However, further increase in economic growth improves environment by 0.104%. Energy consumption has deteriorating effect on environment. Financial development has degraded the environment in the region, which indicates that South Asian countries have used financial development for capitalization and not to improve technology. The estimated results show that 1% increase in financial development deteriorates environment by 0.147%. FDI, which is a measure of financial openness, has mitigating effect on pollution. In turn, trade openness has worsened the environmental quality in the region. Institutional quality has significant negative effect on carbon emissions. It also has significant negative moderating effects on carbon emissions. The findings show that 1% improvement in institutional quality will decrease pollution by 0.114%. The study suggests that South Asian countries should focus more on technology effect and not on scale effect of financial development.

Foreign direct investment (FDI) is an important driving force for economic growth and technological innovation, but it also brings environmental pollution problems along with economic development. From the perspective of technological innovation, the impact of FDI on China’s environmental pollution deserves further study. With the spatial econometric tools employed to account for the potential spatial dependence of environmental pollution, this study uses the panel data of 30 province-level units in China from 1998 to 2016 to investigate the impact of FDI and technological innovation on environmental pollution. The results show that increased FDI can reduce environmental pollution, confirming the existence of the “pollution halo hypothesis”; technological innovation can reduce the emissions of sulfur dioxide and smoke dust but increase the chemical oxygen demand. Therefore, vigorous introduction of foreign capital is good for sustainable development for government, but it is also necessary to pay attention to screening and identifying environment-friendly enterprises with advanced production technology and management experience and to reject high-pollution and high-energy-consuming enterprises eliminated by developed countries.

Various environmental factors influence the outbreak and spread of epidemic or even pandemic events which, in turn, may cause feedbacks on the environment. The novel coronavirus disease (COVID-19) was declared a pandemic on 13 March 2020 and its rapid onset, spatial extent and complex consequences make it a once-in-a-century global disaster. Most countries responded by social distancing measures and severely diminished economic and other activities. Consequently, by the end of April 2020, the COVID-19 pandemic has led to numerous environmental impacts, both positive such as enhanced air and water quality in urban areas, and negative, such as shoreline pollution due to the disposal of sanitary consumables. This study presents an early overview of the observed and potential impacts of the COVID-19 on the environment. We argue that the effects of COVID-19 are determined mainly by anthropogenic factors which are becoming obvious as human activity diminishes across the planet, and the impacts on cities and public health will be continued in the coming years.

This study examined the drivers of environmental degradation and pollution in 17 countries in Africa from 1971 to 2013. The empirical study was analyzed with Westerlund error-correction model and panel cointegration tests with 1000 bootstrapping samples, U-shape test, fixed and random effect estimators, and panel causality test. The investigation of the nexus between environmental pollution economic growth in Africa confirms the validity of the EKC hypothesis in Africa at a turning point of US$ 5702 GDP per capita. However, the nexus between environmental degradation and economic growth reveals a U shape at a lower bound GDP of US$ 101/capita and upper bound GDP of US$ 8050/capita, at a turning point of US$ 7958 GDP per capita, confirming the scale effect hypothesis. The empirical findings revealed that energy consumption, food production, economic growth, permanent crop, agricultural land, birth rate, and fertility rate play a major role in environmental degradation and pollution in Africa, thus supporting the global indicators for achieving the sustainable development goals by 2030.

Urban road sediments act as large basins for heavy metal contaminants produced as a result of natural processes and anthropogenic activities. This study is aimed at reviewing research over recent decades on heavy metal contamination in different cities around the world. The study reviews literature from Google Scholar, Web of Science, and Scopus journal publications. Cr, Cu, Pb, Zn, Ni, and Cd levels vary from one city to another. Based on the collected results, the pollution level and geoaccumulation index are estimated in each city. The levels of pollution in these cities range from low to extremely high, depending on the sources of pollution at each site (geogenic and anthropogenic sources, etc.) and factors like the distribution of industrial activities, population, and traffic emissions. This review shows that the development of modern cities and rapid urbanization are the major causes of heavy metal contamination in the environment. The contamination of the urban environment has different sources, both natural and anthropogenic in character. Solving the problem of heavy metal contamination in the urban environment requires the use of different techniques such as urban road control treatment and soil remediation.

Background:Pregnant women and children are especially vulnerable to exposures to food contaminants, and a balanced diet during these periods is critical for optimal nutritional status.Objectives:Our objective was to study the association between diet and measured blood and urinary levels of environmental contaminants in mother–child pairs from six European birth cohorts (n=818 mothers and 1,288 children).Methods:We assessed the consumption of seven food groups and the blood levels of organochlorine pesticides, polybrominated diphenyl ethers, polychlorinated biphenyls (PCBs), per- and polyfluoroalkyl substances (PFAS), and heavy metals and urinary levels of phthalate metabolites, phenolic compounds, and organophosphate pesticide (OP) metabolites. Organic food consumption during childhood was also studied. We applied multivariable linear regressions and targeted maximum likelihood based estimation (TMLE).Results:Maternal high (≥4  times/week) versus low (<2  times/week) fish consumption was associated with 15% higher PCBs [geometric mean (GM) ratio=1.15; 95% confidence interval (CI): 1.02, 1.29], 42% higher perfluoroundecanoate (PFUnDA) (GM   ratio=1.42; 95% CI: 1.20, 1.68), 89% higher mercury (Hg) (GM   ratio=1.89; 95% CI: 1.47, 2.41) and a 487% increase in arsenic (As) (GM   ratio=4.87; 95% CI: 2.57, 9.23) levels. In children, high (≥3  times/week) versus low (<1.5  times/week) fish consumption was associated with 23% higher perfluorononanoate (PFNA) (GM   ratio=1.23; 95% CI: 1.08, 1.40), 36% higher PFUnDA (GM   ratio=1.36; 95% CI: 1.12, 1.64), 37% higher perfluorooctane sulfonate (PFOS) (GM   ratio=1.37; 95% CI: 1.22, 1.54), and >200% higher Hg and As [GM   ratio=3.87 (95% CI: 1.91, 4.31) and GM   ratio=2.68 (95% CI: 2.23, 3.21)] concentrations. Using TMLE analysis, we estimated that fish consumption within the recommended 2–3 times/week resulted in lower PFAS, Hg, and As compared with higher consumption. Fruit consumption was positively associated with OP metabolites. Organic food consumption was negatively associated with OP metabolites.Discussion:Fish consumption is related to higher PFAS, Hg, and As exposures. In addition, fruit consumption is a source of exposure to OPs. https://doi-org.proxy.insermbiblio.inist.fr/10.1289/EHP5324

A review is presented of the manufacture and use of different types of plastic, and the effects of pollution by these materials on animal, human and environmental health, insofar as this is known. Since 2004, the world has made as much plastic as it did in the previous half century, and it has been reckoned that the total mass of virgin plastics ever made amounts to 8.3 billion tonnes, mainly derived from natural gas and crude oil, used as chemical feedstocks and fuel sources. Between 1950 and 2015, a total of 6.3 billion tonnes of primary and secondary (recycled) plastic waste was generated, of which around 9% has been recycled, and 12% incinerated, with the remaining 79% either being stored in landfills or having been released directly into the natural environment. In 2015, 407 million tonnes (Mt) of plastic was produced, of which 164 Mt was consumed by packaging (36% of the total). Although quoted values vary, packaging probably accounts for around one third of all plastics used, of which approximately 40% goes to landfill, while 32% escapes the collection system. It has been deduced that around 9 Mt of plastic entered the oceans in 2010, as a result of mismanaged waste, along with up to 0.5 Mt each of microplastics from washing synthetic textiles, and from the abrasion of tyres on road surfaces. However, the amount of plastics actually measured in the oceans represents less than 1% of the (at least) 150 Mt reckoned to have been released into the oceans over time. Plastic accounts for around 10% by mass of municipal waste, but up to 85% of marine debris items – most of which arrive from land-based sources. Geographically, the five heaviest plastic polluters are P.R. China, Indonesia, Philippines, Vietnam and Sri Lanka, which between them contribute 56% of global plastic waste. Larger, primary plastic items can undergo progressive fragmentation to yield a greater number of increasingly smaller 'secondary' microplastic particles, thus increasing the overall surface area of the plastic material, which enhances its ability to absorb, and concentrate, persistent organic pollutants (POPs) such as dichlorodiphenyltrichloroethane (DDT) and polychlorinated biphenyls (PCBs), with the potential to transfer them to the tissues of animals that ingest the microplastic particles, particularly in marine environments. Although fears that such microparticles and their toxins may be passed via food webs to humans are not as yet substantiated, the direct ingestion of microplastics by humans via drinking water is a distinct possibility – since 92% of samples taken in the USA and 72% in Europe showed their presence – although any consequent health effects are as yet unclear. Foodstuffs may also become contaminated by microplastics from the air, although any consequent health effects are also unknown. In regard to such airborne sources, it is noteworthy that small plastic particles have been found in human lung tissue, which might prove an adverse health issue under given circumstances. It is also very striking that microplastics have been detected in mountain soils in Switzerland, which are most likely windborne in origin. Arctic ice core samples too have revealed the presence of microplastics, which were most likely carried on ocean currents from the Pacific garbage patch, and from local pollution from shipping and fishing. Thus, sea ice traps large amounts of microplastics and transports them across the Arctic Ocean, but these particles will be released into the global environment when the ice melts, particularly under the influence of a rising mean global temperature. While there is a growing emphasis toward the substitution of petrochemically derived plastics by bioplastics, controversy has arisen in regard to how biodegradable the latter actually are in the open environment, and they presently only account for 0.5% of the total mass of plastics manufactured globally. Since the majority of bioplastics are made from sugar and starch materials, to expand their use significantly raises the prospect of competition between growing crops to supply food or plastics, similarly to the diversion of food crops for the manufacture of primary biofuels. The use of oxo-plastics, which contain additives that assist the material to degrade, is also a matter of concern, since it is claimed that they merely fragment and add to the environmental burden of microplastics; hence, the European Union has moved to restrict their use. Since 6% of the current global oil (including natural gas liquids, NGLs) production is used to manufacture plastic commodities – predicted to rise to 20% by 2050 – the current approaches for the manufacture and use of plastics (including their end-use) demand immediate revision. More extensive collection and recycling of plastic items at the end of their life, for re-use in new production, to offset the use of virgin plastic, is a critical aspect both for reducing the amount of plastic waste entering the environment, and in improving the efficiency of fossil resource use. This is central to the ideology underpinning the circular economy, which has common elements with permaculture, the latter being a regenerative design system based on 'nature as teacher', which could help optimise the use of resources in town and city environments, while minimising and repurposing 'waste'. Thus, food might be produced more on the local than the global scale, with smaller inputs of fuels (including transportation fuels for importing and distributing food), water and fertilisers, and with a marked reduction in the use of plastic packaging. Such an approach, adopted by billions of individuals, could prove of immense significance in ensuring future food security, and in reducing waste and pollution – of all kinds.