Explore the vast range of titles available.

Traumatic head injuries remain a leading cause of death and disability worldwide. Although skull fractures are one of the most common head injuries, the fundamental mechanics of cranial bone and its impact tolerance are still uncertain. In the present study, a strain-rate-dependent material model for cranial bone has been proposed and implemented in subject-specific Finite Element (FE) head models in order to predict skull fractures in five real-world fall accidents. The subject-specific head models were developed following an established image-registration-based personalization pipeline. Head impact boundary conditions were derived from accident reconstructions using personalized human body models. The simulated fracture lines were compared to those visible in post-mortem CT scans of each subject. In result, the FE models did predict the actual occurrence and extent of skull fractures in all cases. In at least four out of five cases, predicted fracture patterns were comparable to ones from CT scans and autopsy reports. The tensile material model, which was tuned to represent rate-dependent tensile data of cortical skull bone from literature, was able to capture observed linear fractures in blunt indentation loading of a skullcap specimen. The FE model showed to be sensitive to modeling parameters, in particular to the constitutive parameters of the cortical tables. Nevertheless, this study provides a currently lacking strain-rate dependent material model of cranial bone that has the capacity to accurately predict linear fracture patterns. For the first time, a procedure to reconstruct occurrences of skull fractures using computational engineering techniques, capturing the all-in-all fracture initiation, propagation and final pattern, is presented.

Abusive Head Trauma (AHT) is considered by some authors to be a leading cause of traumatic death in children less than two years of age and skull fractures are commonly seen in cases of suspected AHT. Today, diagnosing whether the observed fractures are caused by abuse or accidental fall is still a challenge within both the medical and the legal communities and the central question is a biomechanical question: can the described history explain the observed fractures? Finite element (FE) analysis has been shown a valuable tool for biomechanical analysis accounting for detailed head geometry, advanced material modelling, and case-specific factors (e.g. head impact location, impact surface properties). Here, we reconstructed two well-documented suspected abuse cases (a 3- and a 4-month-old) using subject-specific FE head models. The models incorporate the anatomical details and age-dependent anisotropic material properties of infant cranial bones that reflect the grainy fibres radiating from ossification centres. The impact locations are determined by combining multimodality images. The results show that the skull fracture patterns in both cases of suspected abuse could be explained by the described accidental fall history, demonstrating the inherent potential of FE analysis for providing biomechanical evidence to aid forensic investigations. Increased knowledge of injury mechanisms in children may have enormous medico-legal implications world-wide.

Cellular materials have been used in many applications such as insulation, packaging, and protective gear. Expanded polystyrene has been widely used as energy-absorbing liner in helmets due to its excellent cost-benefit relation. This synthetic material can absorb reasonable amounts of energy via permanent deformation. However, in real-world accidents, helmets may be subjected to multi-impact scenarios. Additionally, oil-derived plastic is presently a major source of societal concern regarding pollution and waste. As a sustainable alternative, cork is a natural cellular material with great crashworthiness properties and it has the remarkable capacity to recover after compression, due to its viscoelastic behavior, which is a desired characteristic in multi-impact applications. Therefore, the main goal is to analyze the applicability of agglomerated cork as padding material in safety helmets. First, a finite element model of a motorcycle helmet available on the market was developed to assess its safety performance and to establish a direct comparison between expanded polystyrene and cork agglomerates as liners. Secondly, a new helmet model with a generic geometry was developed to assess the applicability of agglomerated cork as liner for different types of helmets, based on the head injury risk predictions by the finite element head model, YEt Another Head Model (YEAHM), developed by the authors. Several versions of helmet liners were created by varying its thickness and removing sections of material. In other words, this generic helmet was optimized by carrying out a parametric study, and by comparing its performance under double impacts. The results from these tests indicate that agglomerated cork liners are an excellent alternative to the synthetic ones. Thus, agglomerated cork can be employed in protective gear, improving its overall performance and capacity to withstand multi-impacts.

Acute subdural hematoma (ASDH) is one of the most frequent traumatic brain injuries (TBIs) with high mortality rate. Bridging vein (BV) ruptures is a major cause of ASDH. The KTH finite element head model includes bridging veins to predict acute subdural hematoma due to BV rupture. In this model, BVs were positioned according to Oka et al. (1985). The aim of the current study is to investigate whether the location and entry angles of these BVs could be modelled using data from a greater statistical sample, and what the impact of this improvement would be on the model’s predictive capability of BV rupture. From the CT angiogram data of 78 patients, the relative position of the bridging veins and their entry angles along the superior sagittal sinus was determined. The bridging veins were repositioned in the model accordingly. The performance of the model, w.r.t. BV rupture prediction potential was tested on simulations of full body cadaver head impact experiments. The experiments were simulated on the original version of the model and on three other versions which had updated BV positions according to mean, maximum and minimum entry angles. Even though the successful prediction rate between the models stayed the same, the location of the rupture site significantly improved for the model with the mean entry angles. Moreover, the models with maximum and minimum entry angles give an insight of how BV biovariability can influence ASDH. In order to further improve the successful prediction rate, more biofidelic data are needed both with respect to bridging vein material properties and geometry. Furthermore, more experimental data are needed in order to investigate the behaviour of FE head models in depth.

The human head is a highly complex structure, with a combination of hard and soft tissues and a variety of materials and interactions. Many researchers have used computational approaches to model the head, and several human finite element head models can be found in the literature. However, most of them are not geometrically accurate – for instance, the brain is simplified to a smooth spherical volume, which poses some concerns regarding boundary conditions and geometrical accuracy. Therefore, an advanced head model of a 28-year-old, designated as aHEAD 28 yo (aHEAD: advanced Head models for safety Enhancement And medical Development), has been developed. The model consists entirely of hexahedral elements for 3D structures of the head such as the cerebellum, skull and cerebrum, with detailed geometry of the gyri and sulci. Additionally, it is one of the first human head approaches published in the literature that includes cerebrospinal fluid simulated by Smoothed Particle Hydrodynamics (SPH) and a detailed model of pressurized bridging veins. To support the model’s credibility, this study is focused on physical material testing. A novel comprehensive experimental-computational approach is presented, which involves the brain tissue’s response to induced vibrations. The experiment successfully aimed to validate the material models used in the numerical analysis. Additionally, the authors present a kinematical model validation based on the Hardy experimental cadaver test. The developed model, along with its verification, aims to establish a further benchmark in finite element head modelling and can potentially provide new insights into injury mechanisms.

This study is aimed at investigating the influence of skull fractures on traumatic brain injury induced by blunt impact via numerous studies of head–ground impacts. First, finite element (FE) damage modeling was implemented in the skull of the Total HUman Model for Safety (THUMS), and the skull fracture prediction performance was validated against a head–ground impact experiment. Then, the original head model of the THUMS was assigned as the control model without skull element damage modeling. Eighteen (18) head–ground impact models were established using these two FE head models, with three head impact locations (frontal, parietal, and occipital regions) and three impact velocities (25, 35, and 45 km/h). The predicted maximum principal strain and cumulative strain damage measure of the brain tissue were employed to evaluate the effect of skull fracture on the cerebral contusion and diffuse brain injury risks, respectively. Simulation results showed that the skull fracture could reduce the risk of diffuse brain injury risk under medium and high velocities significantly, while it could increase the risk of brain contusion under high-impact velocity.

•Skull fracture patterns in both cases could be explained by the described fall history.•The developed case- and subject-specific models aided forensic diagnosis.•FE analysis has inherent potential for providing biomechanical evidences in AHT diagnosis. Abusive Head Trauma (AHT) is considered by some authors to be a leading cause of traumatic death in children less than two years of age and skull fractures are commonly seen in cases of suspected AHT. Today, diagnosing whether the observed fractures are caused by abuse or accidental fall is still a challenge within both the medical and the legal communities and the central question is a biomechanical question: can the described history explain the observed fractures? Finite element (FE) analysis has been shown a valuable tool for biomechanical analysis accounting for detailed head geometry, advanced material modelling, and case-specific factors (e.g. head impact location, impact surface properties). Here, we reconstructed two well-documented suspected abuse cases (a 3- and a 4-month-old) using subject-specific FE head models. The models incorporate the anatomical details and age-dependent anisotropic material properties of infant cranial bones that reflect the grainy fibres radiating from ossification centres. The impact locations are determined by combining multimodality images. The results show that the skull fracture patterns in both cases of suspected abuse could be explained by the described accidental fall history, demonstrating the inherent potential of FE analysis for providing biomechanical evidence to aid forensic investigations. Increased knowledge of injury mechanisms in children may have enormous medico-legal implications world-wide.

Despite recent efforts on the development of finite element (FE) head models of infants, a model capable of capturing head responses under various impact scenarios has not been reported. This is hypothesized partially attributed to the use of simplified linear elastic models for soft tissues of suture, scalp and dura. Orthotropic elastic constants are yet to be determined to incorporate the direction-specific material properties of infant cranial bone due to grain fibres radiating from the ossification centres. We report here on our efforts in advancing the above-mentioned aspects in material modelling in infant head and further incorporate them into subject-specific FE head models of a newborn, 5- and 9-month-old infant. Each model is subjected to five impact tests (forehead, occiput, vertex, right and left parietal impacts) and two compression tests. The predicted global head impact responses of the acceleration–time impact curves and the force–deflection compression curves for different age groups agree well with the experimental data reported in the literature. In particular, the newly developed Ogden hyperelastic model for suture, together with the nonlinear modelling of scalp and dura mater, enables the models to achieve more realistic impact performance compared with linear elastic models. The proposed approach for obtaining age-dependent skull bone orthotropic material constants counts both an increase in stiffness and decrease in anisotropy in the skull bone—two essential biological growth parameters during early infancy. The profound deformation of infant head causes a large stretch at the interfaces between the skull bones and the suture, suggesting that infant skull fractures are likely to initiate from the interfaces; the impact angle has a profound influence on global head impact responses and the skull injury metrics for certain impact locations, especially true for a parietal impact.

In recent years, the use of source analysis based on electroencephalography (EEG) and magnetoencephalography (MEG) has gained considerable attention in presurgical epilepsy diagnosis. However, in many cases the source analysis alone is not used to tailor surgery unless the findings are confirmed by lesions, such as, e.g., cortical malformations in MRI. For many patients, the histology of tissue resected from MRI negative epilepsy shows small lesions, which indicates the need for more sensitive MR sequences. In this paper, we describe a technique to maximize the synergy between combined EEG/MEG (EMEG) source analysis and high resolution MRI. The procedure has three main steps: (1) construction of a detailed and calibrated finite element head model that considers the variation of individual skull conductivities and white matter anisotropy, (2) EMEG source analysis performed on averaged interictal epileptic discharges (IED), (3) high resolution (0.5 mm) zoomed MR imaging, limited to small areas centered at the EMEG source locations. The proposed new diagnosis procedure was then applied in a particularly challenging case of an epilepsy patient: EMEG analysis at the peak of the IED coincided with a right frontal focal cortical dysplasia (FCD), which had been detected at standard 1 mm resolution MRI. Of higher interest, zoomed MR imaging (applying parallel transmission, ‘ZOOMit’) guided by EMEG at the spike onset revealed a second, fairly subtle, FCD in the left fronto-central region. The evaluation revealed that this second FCD, which had not been detectable with standard 1 mm resolution, was the trigger of the seizures.