Explore the vast range of titles available.

Ceramic capacitors with upper operating temperatures far beyond 200°C are essential for high-temperature electronics used in deep oil drilling, aviation, automotive industry and so on. Recent advances in existing lead-free dielectrics for potential high-temperature capacitor applications are reviewed and grouped into three categories according to the parent component of the solid solution. Their desirable temperature stabilities were summarised comprehensively. However, there are still some limitations in the current research, such as achieving low loss in a wide temperature range and maintaining stable dielectric properties with different frequencies or at different voltages. Furthermore, the successful implementation of multilayer ceramic capacitors is one of the biggest challenges, which will have far-reaching impacts on the realisation of high-temperature capacitor application in the future.

Hundreds of different types of coatings are used to protect a variety of structural engineering materials from corrosion, wear, and erosion, and to provide lubrication and thermal insulation. Of all these, thermal barrier coatings (TBCs) have the most complex structure and must operate in the most demanding high-temperature environment of aircraft and industrial gas-turbine engines. TBCs, which comprise metal and ceramic multilayers, insulate turbine and combustor engine components from the hot gas stream, and improve the durability and energy efficiency of these engines. Improvements in TBCs will require a better understanding of the complex changes in their structure and properties that occur under operating conditions that lead to their failure. The structure, properties, and failure mechanisms of TBCs are herein reviewed, together with a discussion of current limitations and future opportunities.

This book demonstrates how to counteract the thermal effects of the rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally-protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. The author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. Professional engineers, chemists, physicists and graduate students will benefit from this book.

This book is an excellent summary of the basic principles of high temperature corrosion; an understanding of which is of paramount importance in understanding the subject. The book begins with the basics of thermodynamics, followed by an up-to-date summary of experimental methods; many of which have not been covered by previous books. The usual supporting topics, such as defect structures in compounds, are presented with great clarity. The book concludes with numerous case-histories which give a good basis for solving practical problems, using the principles expounded in the book. The writers have drawn upon their many years of experience in the field and have provided a most useful book. This work will prove to be an excellent and enduring textbook for graduate courses in oxidation.

Regarding the fabrication of solar selective absorbers, the ability to create microstructures on top of metal surfaces is a promising technology. Typically, these materials are able to possess spectrally-selective absorption properties for high-temperature usage. Solar-selective absorbers that function at temperatures up to 700 °C and possess shallow honeycomb cylindrical microcavities coated with a metal-dielectric multi-layer have been investigated. Honeycomb array cylindrical microcavities were fabricated on W substrate with interference lithography and multi-layers consisting of Pt nano-film sandwiched by Al2O3 layers were created for a uniform coating via atomic layer deposition. The absorbance spectrum of fabricated samples reveals results consistent with a simulation based on a rigorous coupled-wave analysis method. A solar absorbance value of 0.92 and a hemispherical total emittance value of 0.18 at 700 °C was determined from the fabricated solar-selective absorber. Additionally, thermal stability of up to 700 °C was confirmed in vacuum.

This book is a review of corrosion and thermal protection topics associated with coatings applied in high temperature applications, namely catalytic converters, combustion and steam environments, and gas turbines. Information on corrosion influencing mechanisms and their impact are reviewed.

The authors explain the changes in the thermophysical and thermomechanical properties of polymer composites under elevated temperatures and fire conditions. Using microscale physical and chemical concepts they allow researchers to find reliable solutions to their engineering needs on the macroscale. In a unique combination of experimental results and quantitative models, a framework is developed to realistically predict the behavior of a variety of polymer composite materials over a wide range of thermal and mechanical loads. In addition, the authors treat extreme fire scenarios up to more than 1000?C for two hours, presenting heat-protection methods to improve the fire resistance of composite materials and full-scale structural members, and discuss their performance after fire exposure. Thanks to the microscopic approach, the developed models are valid for a variety of polymer composites and structural members, making this work applicable to a wide audience, including materials scientists, polymer chemists, engineering scientists in industry, civil engineers, mechanical engineers, and those working in the industry of civil infrastructure.

Understanding changes in chemistry, microstructure, and physical properties during synthesis, processing, testing, and even service is vital for materials design and performance. Compared to traditional postmortem material characterization tools, in situ crystallographic characterization can provide considerable data and information on evolution of chemistry, dislocations, twinning, texture, and strains when a material is under external stimuli. Neutrons especially are able to probe material bulk properties and behaviors in extreme environments, thanks to their deep penetrating power and unique sensitivity to differentiate elements from lightweight to transition-metal atoms. In this article, we introduce and describe a diffractometer named VULCAN, which is located at Oak Ridge National Laboratory. This represents a powerful tool to understand materials properties and behaviors under complex environments, in particular, at high temperatures.

Conventional alloy design based on a single primary element has reached its limits in terms of performance optimization. An alloy design strategy with multi-principal elements has recently been uncovered to overcome this bottleneck. Multicomponent alloys, generally referred to as high-entropy alloys (HEAs), exhibit many promising properties, especially outstanding mechanical performance at cryogenic, ambient, and elevated temperatures. In this article, we focus on precipitation-hardened HEAs, which are potential candidates for next-generation structural materials, especially at high temperatures. The key issues involved include precipitation behaviors, phase stability, and phase control, all of which provide useful guidelines for further development of high-temperature materials with superior performance. In particular, we address the formation of cellular γ′ precipitates at grain boundaries, which is closely related to the embrittlement of HEAs at intermediate temperatures. Critical issues and design strategies in developing HEAs for high-temperature applications are also discussed.