Explore the vast range of titles available.

We report on a 3 years monitoring experiment of low to medium temperature diffuse venting at two vent sites (Tour Eiffel and White Castle) of the Lucky Strike, black smoker‐type hydrothermal field, Mid‐Atlantic Ridge. Diffuse vents account for a large part of the energy flux of mid‐ocean ridges hydrothermal fields and provide key habitats for the hydrothermal fauna. We document the time and space variability of diffuse venting temperature and chemistry, describe the effect of tidal loading and currents and discuss the extent of mixing, cooling of black smoker fluids, heating of entrained seawater and anhydrite precipitation/dissolution in the substratum. We emphasize the role of a thin (<2 m) volcaniclastic formation capping the brecciated basalt substratum. This formation is porous, but becomes impermeable when indurated by hydrothermal precipitates. It forms an intermediate layer between the vents at the seabed and the fluids as they discharge out of the brecciated basalts. Diffuse fluids inferred to discharge out of meter‐spaced cracks in the brecciated basalts beneath this volcaniclastic layer are hot (>80°C) and contain >10% of the hot endmember fluid component, over distances of up to 25 m from the black smokers. These results provide a geologically integrated framework in which to study site‐scale, near seafloor hydrothermal circulation and associated vent habitats at Lucky Strike and other black smoker‐type hydrothermal fields. They suggest diffuse heat fluxes in the upper range of previously published estimates at the two studied Lucky Strike hydrothermal vent sites. Plain Language Summary Mid‐ocean ridges (MOR) are a key feature of plate tectonics, extending some 60,000 km in all the major oceans. MOR hydrothermal circulations transfer heat and chemical compounds from the solid earth to the ocean and provide habitats for the hydrothermal fauna. The vents include black smokers that expel the hottest fluids and diffuse vents that expel lower temperature fluids at lower rates but over larger surfaces. The contribution of diffuse vents to the energy and chemical fluxes of MOR hydrothermal systems is still largely an open question. In this paper, we address it by using data from a 3 years monitoring experiment of diffuse vents at two sites (Tour Eiffel and White Castle) of the Lucky Strike, a black smoker‐type hydrothermal field in the Mid‐Atlantic Ridge. We document the time and space variability of venting temperature and derive chemical constraints on the extent of mixing of black smoker fluids with entrained seawater and of mineral precipitation/dissolution in the substratum of the vents. Our results suggest diffuse heat fluxes in the upper range of previously published Lucky Strike hydrothermal field estimates and provide a geologically integrated framework in which to study diffuse vent habitats at Lucky Strike and other black smoker‐type hydrothermal fields. Key Points Time variability of both fluid temperature and fluid chemistry at diffuse vents of the Lucky Strike mid‐ocean ridge hydrothermal field Hot (>80°C) and hydrothermal endmember‐rich diffuse fluids (>10%) come out of the basalts up to 25 m from the black smokers Fluids that come out of basalt substratum are modified in volcaniclastic layer before coming out at vents that host the hydrothermal fauna

The Asal Rift is a continental rift segment in which the hydrothermal reactions of hot volcanic rocks and seawater‐derived groundwater are comparable to the submarine hydrothermal processes. Formation of recent evaporites in the hypersaline Lake Asal and Lake Abhé is superimposed on this seafloor‐type hydrothermal activity. From a geological and planetary science perspective, these continental rift lakes are valuable natural calibration fields for constraining the water–rock interaction and elemental cycles. In this study, we report on the chemical composition and stable isotopic fractionation of Mg, Sr, and Li in the hydrothermal fluids and brines of these two hypersaline lakes. The hydrothermal fluids of both Lake Asal and Lake Abhé were characterized by lower Mg isotopic ratios than seawater. This is explained by the removal of 26 Mg from the fluids during the hydrothermal fluid–basalt interaction. In contrast, the brine from Lake Asal is indistinguishable from seawater, and no apparent effect of evaporite minerals on δ 26 Mg was observed. The 87 Sr/ 86 Sr and δ 88 Sr values of the hydrothermal fluid vary within the same range as the basalt, indicating that the effect of Sr leaching from the rock is significant. In contrast, the variation in δ 88 Sr is mainly caused by the precipitation of carbonates from the lake brine. The correlation between δ 7 Li and 87 Sr/ 86 Sr is clear regardless of the sample type (hydrothermal fluid, brine, or river water) and is thought to reflect the mixing of solutes. The δ 7 Li values of the hydrothermal end‐members can be used as an indicator of the reservoir temperature of fluids.

Hydrothermal activity is widespread in sedimentary basins, but its dual effects (chemistry and temperature) on shale reservoirs are rarely discussed. In this research, we systematically collected 33 well core samples from Q1 to Q9 units in Gulong Sag, Songliao Basin, and analyzed them using a variety of analytical techniques, including a field emission scanning electron microscopy (FE-SEM), an energy-dispersive spectrometer (EDS), X-ray diffraction (XRD), and stable C-O isotopes. Combined with the collected vitrinite reflectance (Ro), total organic carbon (TOC), and soluble hydrocarbon content data, which is the sum of free oil (pyrolysis S1) and sorb oil content (pyrolysis S2), the results show that (1) Q4 and Q8 units have large amounts of hydrothermal minerals, and its C-O isotope obviously shifts to negative, which implied those units are the main hydrothermal fluid influence area; (2) the hydrothermal activity occurred in the late depositional period of Q1–Q9 units such that its geochemistry has little effect on the proliferation of algae blooms, but its high temperature calculated by δ18O temperature formulas (around 208 °C) promoted the organic matter maturation process around Q4 and Q8; and (3) the overpressure caused by hydrothermal activity protected the shale reservoir and minimized the decrease in mineral reservoir brittleness index caused by hydrothermal fluid influence. We suggest that the shale reservoir affected by hydrothermal fluid will become a good geology “dessert”, and its upper and/or lower bounds can form an engineering “dessert” due to the precipitation of large amounts of brittle carbonate minerals.

The Ushiri Valley sulfide mineralization, a newly identified deposit in the Upper Dir region, is located in the western part of the Kohistan Island Arc, northern Pakistan. The mineralization occurs within massive amphibolites of the Kamila Amphibolites and the granodiorite and granite of the Kohistan Batholith. Three types of mineralization have been identified: 1) sulfide mineralization along quartz veins, 2) disseminated sulfide mineralization in the host rocks, and 3) supergene enrichment along localized shear zones. The amphibolites, granodiorite, and granite of the study area are extensively intruded by quartz veins, which generally host sulfide mineralization mainly in the form of chalcopyrite and pyrite, with a lesser amounts of bornite, galena, and sphalerite. Secondary minerals such as malachite, azurite, and limonite/hematite occur as products of supergene enrichment. The host rocks adjacent to the mineralized quartz veins contain the same sulfide mineral assemblage in disseminated form. Hydrothermal alteration, including saussuritization, sericitization, kaolinization, propylitization, and silicification is commonly observed in the mineralized host rocks within shear zones and at the contact between mineralized quartz veins and the host rocks. Geochemical data from hydrothermally altered host rocks indicate that the mineralizing hydrothermal fluids were significantly enriched in FeO, K2O, and Cu, while the Pb, Zn, W, Cr, Ni, and Co show slight enrichment. Sulfur (δ34S) and oxygen (δ18O) isotopic data suggest the involvement of heavy magmatic fluids related to deep-seated intrusions. These fluids likey formed metal complexes and acted as high-temperature metalliferous fluids responsible for the precipitation of base metals sulfides within quartz veins and the associated host rocks, which can be correlated with a porphyry-type mineralizaton system.

Structures resembling iron-related bacteria (IRB) have been found in the Mississippian limestones that form part of the carbonate platform in the Moravo-Silesian Basin that surrounds the Upper Silesian Block, an eastern margin of the Brunovistulicum. Microfacial, petrological, and geochemical analyses were used to determine the bacteria-like structures that are present in narrow zones unrelated to bedding. We present here the morphology and chemistry of the studied microstructures showing their similarities to IRB from the present-day Sphaerotilus-Leptothrix group, the Galionella group, and the Mariprofundus ferrooxydans species. We suggest that bacterial growth occurred in the originally empty micropores of microfossil skeletons and shells, between bioclasts or in secondary voids formed during the selective dissolution of micrite or smaller sparite crystals. Hydrothermal solutions, associated probably with the post-Variscan magmatism in this area, provided iron compounds for the growth of the IRB.

The Sidi Aissa Pb-Zn-(Ag) District, located within the Nappe Zone of northern Tunisia, has been reinterpreted as a typical intermediate-sulfidation (IS) epithermal mineralization system based on field observations and lithogeochemical analyses. Previously described as vein-style Pb-Zn deposits, the local geological framework is dominated by extensional normal faults forming half-grabens. These faults facilitated the exhumation of deep Triassic autochthonous rocks and the extrusion of 8-Ma rhyodacites and Messinian basalts. These structures, functioning as pathways for magmatic-hydrothermal fluids, facilitated the upward migration of acidic fluids, which interacted with the surrounding wall rocks, forming a subsurface alteration zone. The mineralization, shaped by Miocene extensional tectonics and magmatic activity, occurred in three stages: early quartz-dominated veins, an intermediate barite-rich phase, and late-stage supergene oxidation. Hydrothermal alteration, characterized by silicification, argillic, and propylitic zones, is closely associated with the deposition of base metals (Pb, Zn) and silver. The mineral assemblage, including barite, galena, sphalerite, and quartz, reflects dynamic processes such as fluid boiling, mixing, and pressure changes.

The Qiongdongnan Basin constitutes a sedimentary basin characterized by elevated temperatures, significant overpressures, and abundant hydrocarbons. Investigations within this basin have identified hydrothermal fluid movements linked to overpressure conditions, comprising two vertically separated overpressured intervals. The shallow overpressure compartment is principally caused by a combination of undercompaction and clay diagenesis. In contrast, the deeper high-pressure compartment results from hydrocarbon gas generation. Numerical pressure modeling indicates late-stage (post-5 Ma) development of significant overpressure within the deep compartment. It is proposed that accelerated subsidence in the Pliocene-Quaternary initiated substantial gas generation, thereby promoting the formation of the deep overpressured system. Multiple organic maturation parameters, combined with fluid inclusion microthermometry, reveal a thermal anomaly adjacent to the upper boundary of the deep overpressured zone. This anomaly indicates vertical transport of hydrothermal fluids ascending from the underlying high-pressure zone. Laser Raman spectroscopy confirms the presence of both hydrocarbons and carbon dioxide within these migrating fluids. Integration of fluid inclusion thermometry with burial history modeling constrains the timing of hydrocarbon-carrying fluid charge to the interval from 4.2 Ma onward, synchronous with modeled peak gas generation and a phase of pronounced overpressure buildup. We propose that upon exceeding the fracture gradient threshold, fluid pressure triggered upward migration of deeply sourced, hydrocarbon-enriched fluids through hydrofracturing pathways. This process led to localized dissolution and fracturing near the top of the deep overpressured system, while simultaneously facilitating significant hydrocarbon accumulation and forming preferential accumulation zones. These findings provide critical insights into petroleum exploration in overpressured sedimentary basins.

Siliceous rocks of various colors and types are extensively developed within the Middle–Lower Ordovician carbonate along the Northwest Tarim Basin. Their genesis provides important insights into the evolution of basinal fluids and the associated diagenetic alterations of the carbonates. Based on petrographic, geochemical, fluid inclusion, and petrophysical analyses, this study investigates the origin of siliceous rocks within the Middle–Lower Ordovician carbonate formations (Penglaiba, Yingshan, and Dawangou formations) in the Kalpin area, Tarim Basin, and investigates the impact on hydrothermal reservoirs. The results reveal two distinct episodes of siliceous diagenetic fluids: The first during the Late Ordovician involved mixed hydrothermal fluids derived from deep magmatic–metamorphic sources, formation brines, and seawater. Characterized by high temperature and moderate salinity, it generated black chert dominated by cryptocrystalline to microcrystalline quartz through replacement processes. The second episode developed in the Middle–Late Devonian as a mixture of silicon-rich fluids from deep heat sources and basinal brines. In conditions of low temperature and high salinity, it generated gray-white siliceous rocks composed of micro- to fine crystalline quartz, spherulitic-fibrous chalcedony, and quartz cements via a combination of hydrothermal replacement and precipitation. A reservoir analysis reveals that the multi-layered black siliceous rocks possess significant reservoir potential amplified by the syndiagenetic tectonic fracturing. In contrast, the white siliceous rocks, despite superior petrophysical properties, are limited in scale as they predominantly infill late-stage fractures and vugs, mainly enhancing local flow conduits. Hydrothermal alteration in black siliceous rocks is more intense in dolostone host rocks than in limestone. Thus, thick (10–20 m), continuous black siliceous layers in dolostone and the surrounding medium-crystalline dolostone alteration zones, are promising exploration targets. This study elucidates the origins of Ordovician siliceous rocks and their implications for carbonate reservoir properties. The findings may offer valuable clues for deciphering the evolution and predicting the distribution of hydrothermal reservoirs, both within the basin and in other analogous regions worldwide.

Although the 2015 Hakone Volcano eruption was a small-scale phreatic eruption with a discharged mass of only about 100 tons, interferometric synthetic aperture radar successfully detected surface deformations related to the eruption. Inversion model of the underground hydrothermal system based on measured ground displacements by ALOS-2/PALSAR-2 images showed that a crack opened at an elevation of about 530–830 m, probably at the time of the eruption. A geomorphological analysis detected several old NW–SE trending fissures, and the open crack was located just beneath one of the fissures. Thus, the crack that opened during the 2015 eruption could have been a preexisting crack that formed during a more voluminous hydrothermal eruption. In addition, the inversion model implies that a sill deflation occurred at an elevation of about 225 m, probably at the time of the eruption. The deflation of sill-like body represents a preexisting hydrothermal reservoir at an elevation of 100–400 m, which intruded fluid in the open crack prior to eruption. The volume changes of the open crack and the sill were calculated to be 1.14 × 105 m3 (inflation) and 0.49 × 105 m3 (deflation), respectively. A very local swelling (about 200 m in diameter) was also detected at the eruption center 2 months before the eruption. The local swelling, whose rate in satellite line-of-sight was 0.7–0.9 cm/day during May 2015 and declined in June, had been monitored until the time of the eruption, when its uplift halted. This was modeled as a point pressure source at an elevation of about 900 m (at a depth of about 80–90 m from the ground surface) and is considered to be a minor hydrothermal reservoir just beneath the fumarolic field. Our analysis shows that the northernmost tip of the open crack reached within 200 m of the surface. Thus, it is reasonable to assume that the hydrothermal fluid in the open crack found a way to the surface and formed the eruption.

With the continuous deepening of research on seafloor hydrothermal observations, the demand for a sustainable power supply of observation equipment is increasingly urgent. A kind of device that utilizes the temperature difference near hydrothermal vents to provide power is studied. However, the frequent experiments required for in-depth research on this device contradict the rare opportunities for hydrothermal field experiments and the difficulty in laboratory replication. In response to the above difficulties, a multiphysics co-simulation of the deep-sea hydrothermal energy generation system is studied in this paper. Firstly, the output performance analysis and modeling of the TEG installed in the device under pressure are carried out. An enhanced heat transfer model of the system is proposed for the hydrothermal fluids in the flow channel of the device. Then, the thermoelectric model of TEG and the heat transfer model of the device are jointly simulated by using Fluent and Simulink software. Eventually, the simulation data are compared with the data obtained through experiments. The average absolute of the relative error of the open-circuit voltage is 5.07%, and the maximum one is 6.28%. The corresponding values of the maximum output power are 5.16% and 6.79%, respectively. Therefore, the performance of the hydrothermal thermoelectric power generation system and the correctness of the proposed overall co-simulation model are verified.