Explore the vast range of titles available.

We report the synthesis of magnesium–aluminium layered double hydroxide (LDH) using a reaction–diffusion framework (RDF) that exploits the multiscale coupling of molecular diffusion with chemical reactions, nucleation and growth of crystals. In an RDF, the hydroxide anions are allowed to diffuse into an organic gel matrix containing the salt mixture needed for the precipitation of the LDH. The chemical structure and composition of the synthesized magnesium–aluminium LDHs are determined using powder X-ray diffraction (PXRD), thermo-gravimetric analysis, differential scanning calorimetry, solid-state nuclear magnetic resonance (SSNMR), Fourier transform infrared and energy dispersive X-ray spectroscopy. This novel technique also allows the investigation of the mechanism of intercalation of some fluorescent probes, such as the neutral three-dimensional rhodamine B (RhB) and the negatively charged two-dimensional 8-hydroxypyrene-1,3,6-trisulfonic acid (HPTS), using in situ steady-state fluorescence spectroscopy. The incorporation of these organic dyes inside the interlayer region of the LDH is confirmed via fluorescence microscopy, solid-state lifetime, SSNMR and PXRD. The activation energies of intercalation of the corresponding molecules (RhB and HPTS) are computed and exhibit dependence on the geometry of the involved probe (two or three dimensions), the charge of the fluorescent molecule (anionic, cationic or neutral) and the cationic ratio of the corresponding LDH. This article is part of the themed issue ‘Multiscale modelling at the physics–chemistry–biology interface’.

In this paper, a flexible and efficient nano-reinforced polymer inclusion membrane (PIM) was fabricated and used for cyanide (CN ) extraction from water samples. Aliquat 336 (a liquid anion exchanger) was embedded in poly(vinyl chloride) (PVC) support as the extractant. Mg-Al-CO layered double hydroxide (LDH) with high surface area and anion exchange ability was applied to promote the extraction efficiency of PIM. A PIM comprising 56% PVC, 40% Aliquat 336, and 4% Mg-Al-CO LDH showed the best extraction efficiency. A single beam ultraviolet-visible spectrophotometer was used for the detection of cyanide. Surface morphology of the PIM was studied by field emission scanning electron microscopy. The experimental parameters influencing the extraction process were investigated and optimized. The intra- and inter-day relative standard deviations at two different concentrations were in the range of 2.8-7.6%. The dynamic range of the method was in the range of 5-500 μg L , and the detection limit was 1.4 μg L . The LDH reinforced PIM showed proper characteristics for the extraction of cyanide from real water and wastewater samples with recoveries between 82 and 115%.

Hydrotalcite and its calcination product were used to treat pure water spiked with various concentrations of boron and geothermal water containing boron as a major undesirable element. The kinetics process of boron sorption by uncalcined hydrotalcite is controlled by the diffusion of boron from bulk solution to sorbent-solution boundary film and its exchange with interlayer chloride of hydrotalcite, whereas the removal rate of boron by calcined hydrotalcite rests with the restoration process of its layered structure. The results of isotherm sorption experiments reveal that calcined hydrotalcite generally has much stronger ability to lower solution boron concentration than uncalcined hydrotalcite. The combination of adsorption of boron on the residue of MgO–Al 2 O 3 solid solution and intercalation of boron into the reconstructed hydrotalcite structure due to “structural memory effect” is the basic mechanism based on which the greater boron removal by calcined hydrotalcite was achieved. As 15 geothermal water samples were used to test the deboronation ability of calcined hydrotalcite at 65 °C, much lower boron removal efficiencies were observed. The competitive sorption of the other anions in geothermal water, such as HCO 3 − , SO 4 2− , and F − , is the reason why calcined hydrotalcite could not remove boron from geothermal water as effectively as from pure boron solution. However, boron removal percents ranging from 89.3 to 99.0 % could be obtained if 50 times of sorbent were added to the geothermal water samples. Calcined hydrotalcite is a good candidate for deboronation of geothermal water.

Super dosing copper (Cu) has long been used as an alternative to antibiotic growth-promoters in broiler chickens’ diet to improve gut health. This study was designed to compare nutritional and growth-promoting levels of Cu hydroxychloride (CH) with CuSO 4 on gut health bio-markers and liver mineral profile of broiler chickens. Ross 308 chicks ( n  = 864) were randomly assigned to eight treatments, as basal diet containing no supplemental Cu; the basal diet with 15 or 200 mg/kg Cu as CuSO 4 ; or 15, 50, 100, 150 or 200 mg/kg Cu from CH. The highest liver Cu content was observed in birds fed the diets with 200 mg/kg CuSO 4 ( P  < 0.01). Serum FITC-d concentration as the leaky gut marker, and liver malondialdehyde concentration were not affected. Copper level or source had no effect on cecal short chain fatty acid and the mRNA expression of five jejunal genes involved in gut integrity. Negative linear responses of Cu were observed on Lactobacillus ( P  = 0.032), Bacteroides ( P  = 0.033), and Enterobacteriaceae ( P  = 0.028) counts. The jejunal villus height increased in birds fed CH at 200 and 100 mg/kg ( P  < 0.05). Increasing Cu levels, linearly and quadratically ( P  < 0.001), increased Cu excretion.

The sustainability of the rice–wheat system is threatened due to the deterioration of soil health and emergence of new challenges of climate change caused by low nutrient use efficiency and large scale burning of crop residues. The conservation agriculture based on tillage intensity, crop residue retention and raising green manuring (GM) crops during the intervening period between wheat harvest and rice establishment offers opportunities for restoration of phosphorus (P) dynamics and stimulate phosphatase activities within the macro-and micro-aggregates. Phosphorus and phosphatase activities in the soil aggregates affected by different residue management practices remain poorly understood. Thus, soil samples were obtained after a five-year field experiment to identify the effect of tillage, green manure and residue management on aggregate-associated phosphorus fractions. Four main plot treatments in rice included combination of wheat straw and GM were conventional till puddled transplanted rice (PTR) with no wheat straw (PTR W0 ), PTR with 25% wheat stubbles retained (PTR W25 ), PTR without wheat straw and GM (PTR W0  + GM), and PTR with wheat stubbles and GM (PTR W25  + GM). Three sub-plots treatments in the successive wheat crop were conventional tillage (CT) with rice straw removed (CTW R0 ), zero tillage (ZT) with rice straw removed (ZTW R0 ) and ZT with rice straw retained as surface mulch (ZTW R100 ). Results of the present study revealed significantly higher phosphorus fractions (HCl-P, NaHCO 3 -P i and NaOH-P o ) in treatment PTRW 25  + GM and ZTW R100 compared with PTRW 0 /CTW R0 within both macro- and micro-aggregates. The total phosphorus (P), available P, alkaline phosphatase and phytin-P were significantly higher under ZTW R100 than CTW R0 . The principal component analysis identified NaOH-P o , NaHCO 3 -P i and HCl-P as the dominant and reliable indicators for evaluating P transformation within aggregates under conservation agriculture-based practices.

Incense sticks ash is one of the most unexplored by-products generated at religious places and houses obtained after the combustion of incense sticks. Every year, tonnes of incense sticks ash is produced at religious places in India which are disposed of into the rivers and water bodies. The presence of heavy metals and high content of alkali metals challenges a potential threat to the living organism after the disposal in the river. The leaching of heavy metals and alkali metals may lead to water pollution. Besides this, incense sticks also have a high amount of calcium, silica, alumina, and ferrous along with traces of rutile and other oxides either in crystalline or amorphous phases. The incense sticks ash, heavy metals, and alkali metals can be extracted by water, mineral acids, and alkali. Ferrous can be extracted by magnetic separation, while calcium by HCl, alumina by sulfuric acid treatment, and silica by strong hydroxides like NaOH. The recovery of such elements by using acids and bases will eliminate their toxic heavy metals at the same time recovering major value-added minerals from it. Here, in the present research work, the effect on the elemental composition, morphology, crystallinity, and size of incense sticks ash particles was observed by extracting ferrous, followed by extraction of calcium by HCl and alumina by H 2 SO 4 at 90–95 °C for 90 min. The final residue was treated with 4 M NaOH, in order to extract leachable silica at 90 °C for 90 min along with continuous stirring. The transformation of various minerals phases and microstructures of incense sticks ash (ISA) and other residues during ferrous, extraction, calcium, and alumina and silica extraction was studied using Fourier transform infrared (FTIR), dynamic light scattering (DLS), X-ray fluorescence (XRF), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and inductively coupled plasma-optical emission spectroscopy (ICP-OES). DLS was used for analyzing the size during the experiments while FTIR helped in the confirmation of the formation of new products during the treatments. From the various instrumental analyses, it was found that the toxic metals present in the initial incense sticks ash got eliminated. Besides this, the major alkali metals, i.e., Ca and Mg, got reduced during these successive treatments. Initially, there were mainly irregular shaped, micron-sized particles that were dominant in the incense sticks ash particles. Besides this, there were plenty of carbon particles left unburned during combustion. In the final residue, nanosized flowers shaped along with cuboidal micron-sized particles were dominant. present in If, such sequential techniques will be applied by the industries based on recycling of incense sticks ash, then not only the solid waste pollution will be reduced but also numerous value-added minerals like ferrous, silica, alumina calcium oxides and carbonates can be recovered from such waste. The value-added minerals could act as an economical and sustainable source of adsorbent for wastewater treatment in future.

A key requirement for 13C Metabolic flux analysis (13C-MFA), a widely used technique to estimate intracellular metabolic fluxes, is an efficient method for the extraction of intermediate metabolites for analysis via liquid chromatography mass spectrometry (LC/MS). The 13C isotopic labeling results in further distribution of an already sparse pool of intermediate metabolites into isotopologues, each appearing as a separate chromatographic feature. We examined some of the reported solvent systems for the extraction of polar intracellular metabolites from three strains of cyanobacteria of the genus Synechococcus, viz., Synechococcus sp. PCC 7002, Synechococcus elongatus PCC 7942, and a newly isolated Synechococcus elongatus PCC 11801 (manuscript under review). High resolution-LC/MS was used to assess the relative abundance of the extracted metabolites. The different solvent systems used for extraction led to statistically significant changes in the extraction efficiency for a large number of metabolites. While a few hundred m/z features or potential metabolites were detected with different solvent systems, the abundance of over a quarter of all metabolites varied significantly from one solvent system to another. Further, the extraction methods were evaluated for a targeted set of metabolites that are important in 13C-MFA studies of photosynthetic organisms. While for the strain PCC 7002, the reported method using methanol-chloroform-water system gave satisfactory results, a mild base in the form of NH4OH had to be used in place of water to achieve adequate levels of extraction for PCC 7942 and PCC 11801. While minor changes in extraction solvent resulted in dramatic changes in the extraction efficiency of a number of compounds, certain metabolites such as amino acids and organic acids were adequately extracted in all the solvent systems tested. Overall, we present a new improved method for extraction using a methanol-chloroform-NH4OH system. Our method improves the extraction of polar compounds such as sugar phosphates, bisphosphates, that are central to 13C-MFA studies.

•OH and •HO ₂ radicals are known to be the key species in the development of ignition. A direct measurement of these radicals under low-temperature oxidation conditions (T = 550–1,000 K) has been achieved by coupling a technique named fluorescence assay by gas expansion, an experimental technique designed for the quantification of these radicals in the free atmosphere, to a jet-stirred reactor, an experimental device designed for the study of low-temperature combustion chemistry. Calibration allows conversion of relative fluorescence signals to absolute mole fractions. Such radical mole fraction profiles will serve as a benchmark for testing chemical models developed to improve the understanding of combustion processes.

Binary PtBi decorated nanoporous gold (NPG-PtBi) electrocatalyst is specially designed and prepared for the anode in direct glucose fuel cells (DGFCs). By using electroless and electrochemical plating methods, a dense Pt layer and scattered Bi particles are sequentially coated on NPG. A simple DGFC with NPG-PtBi as anode and commercial Pt/C as cathode is constructed and operated to study the effect of operating temperatures and concentrations of glucose and NaOH. With an anode noble metal loading of only 0.45 mg cm −2 (Au 0.3 mg and Pt 0.15 mg), an open circuit voltage (OCV) of 0.9 V is obtained with a maximum power density of 8 mW cm −2 . Furthermore, the maximum gravimetric power density of NPG-PtBi is 18 mW mg −1 , about 4.5 times higher than that of commercial Pt/C.

Resource recovery is crucial for small- and medium-sized enterprises to attain a circular economy. The economic benefits of recovering precious metals from electronic waste, such as waste printed circuit boards (WPCBs), are hindered by secondary pollutant emissions from pretreatment processes. This study aims to recover copper from the WPCB acid leaching process and reduce NOx emissions through the use of a high gravity rotating packed bed (RPB). The results indicate that the copper recovery ratio increases to 99.75% through the displacement reaction between iron powder and copper nitrate. The kinetic analysis of copper dissolution was employed to simulate the NOx emissions during acid leaching, with an R -squared value of 0.872. Three oxidants, including H 2 O 2(aq) , ClO 2(aq) , and O 3(g) , with pH adjusted to different NaOH concentrations, were used to remove NOx. The greatest NOx removal rate was achieved using a 0.06 M NaOH solution, with a removal rate of 91.2% for ozone oxidation at a 152-fold gravity level and a gas-to-liquid (G/L) ratio of 0.83. The gas-side mass transfer coefficients ( K G a ) for NOx range from 0.003 to 0.012 1/s and are comparable to previous studies. The results of a life cycle analysis indicate that the NOx removal rate, nitric acid recycling rate, and copper recovery rate are 85%, 80%, and 100%, respectively, reducing the environmental impact on the ecosystem, human health, and resource depletion by 10% compared to a scenario with no NOx removal.