Explore the vast range of titles available.

Large strain construction programs and functional analysis studies are becoming commonplace in Saccharomyces cerevisiae and involve construction of strains that carry multiple selectable marker genes. Extensive strain engineering is, however, severely hampered by the limited number of recyclable marker genes and by the reduced genome stability that occurs upon repeated use of heterologous recombinase‐based marker removal methods. The present study proposes an efficient method to recycle multiple markers in S. cerevisiae simultaneously, thereby circumventing shortcomings of existing techniques and substantially accelerating the process of selection–excision. This method relies on artificial generation of double‐strand breaks around the selection marker cassette by the meganuclease I‐SceI and the subsequent repair of these breaks by the yeast homologous recombination machinery, guided by direct repeats. Simultaneous removal of up to three marker cassettes was achieved with high efficiencies (up to 56%), suggesting that I‐SceI‐based marker removal has the potential to co‐excise an even larger number of markers. This locus‐ and marker‐independent method can be used for both dominant and auxotrophy‐complementing marker genes. Seven pDS plasmids carrying various selectable markers, which can be used for PCR‐based generation of deletion cassettes suited for I‐SceI marker recycling, are described and made available to the scientific community.

Recombineering is a highly efficient DNA cloning and modification technique by using the recombinase-mediated homologous recombination. Selection/counterselection cassette is often used in chromosomal DNA or large episomal DNA manipulation, in which the selection marker is used for the first step cassette selection while deleting the target gene via allelic exchange, and the counterselection marker is used for the second step replacement of the cassette by the foreign DNA fragment. A variety of selection/counterselection cassettes are reported, however, the cassettes suffer from the shortcomings of the requirement of pre-engineered strain or specific culture medium. Herein, we report a novel S-tetR- PtetA-ccdB-aacC1-S selection/counterselection cassette that sidesteps the disadvantages. As a proof-of-concept, one-step gene cloning (0.7, 1.7, and 4.2 kb) and two-step Escherichia coli chromosomal gene knock-in (0.7 and 4.2 kb) were performed. The gene cloning and gene knock-in efficiencies are high up to 90%. The novel selection/counterselection cassette adds a powerful tool to the recombineering repertoire.

The use of fluorescent proteins to study protein expression and localisation has become common practice in the life sciences. While methods to create gene fusions and replacements with fluorescent proteins in model organisms have rapidly developed, there exist far fewer well-established protocols applicable to non-model bacteria. Here, we present a comprehensive account of an allelic-exchange-based mutagenesis strategy using the I-SceI endonuclease in a clinical strain of S. maltophilia . We demonstrate the use of this strategy for the creation of in-frame insertions of fluorescent proteins and entire gene replacements for the purposes of studying protein localisation and expression. This protocol requires minimal setup, and once optimised, can produce mutants in a matter of weeks. We expect this strategy to be of use for laboratories working with poorly-characterised strains and/or bacteria for which information is scarce. Key points Genetic manipulation of non-model Gram-negative bacteria can be cumbersome. Allelic-exchange mutagenesis has typically been used only for creating deletions. We showcase its potential for creating insertions and gene replacements using fluorescent proteins.

The efficient repair of double-strand breaks (DSBs) in genomic DNA is important for the survival of all organisms. In recent years, basic mechanisms of DSB repair in somatic plant cells have been elucidated. DSBs are mainly repaired by non-homologous end-joining (NHEJ). The repair can be associated with deletions, but also insertions due to copying genomic sequences from elsewhere into the break. Species-specific differences of NHEJ have been reported and an inverse correlation of deletion size to genome size has been postulated, indicating that NHEJ might contribute significantly to evolution of genome size. DSB repair by homologous recombination (HR) might also influence genome organization. Whereas homology present in an allelic or an ectopic position is hardly used for repair, the use of homologous sequences in close proximity to the break is frequent. A 'single-strand annealing' mechanism that leads to sequence deletions between direct repeats is particularly efficient. This might explain the accumulation of single long terminal repeats of retroelements in cereal genomes. The conservative 'synthesis-dependent strand annealing' mechanism, resulting in conversions without crossovers is also prominent and seems to be significant for the evolution of tandemly arranged gene families such as resistance genes. Induction of DSBs could be used as a means for the controlled manipulation of plant genomes in an analogous way for the use of marker gene excision and site-specific integration.

A miniature CRISPR-Cas12f has been demonstrated to serve as an effective genome editing tool in gram negative bacteria as well as human cells. Here, we developed an alternative method to edit the genome of Bacillus anthracis based on the AsCas12f1 nuclease from Acidibacillus sulfuroxidans . When the htrA gene on the chromosome and the lef gene on the plasmid pXO1 were selected as targets, the CRISPR-AsCas12f1 system showed very high efficiency (100%). At the same time, a high efficiency was observed for large-fragment deletion. Our results also indicated that the length of the homologous arms of the donor DNA had a close relationship with the editing efficiency. Furthermore, a two-plasmid CRISPR-AsCas12f1 system was also constructed and combined with the endonuclease I-SceI for potential multi-gene modification. This represents a novel tool for mutant strain construction and gene function analyses in B. anthracis and other Bacillus cereus group bacteria.

Pseudomonas putida KT2440 is a saprophytic and generally recognized as safe microorganism that plays important roles in the biodegradation and production of value-added chemicals. Chromosomal gene deletion of P. putida KT2440 usually involves time-consuming gene cloning, conjugal transfer and counterselection. Recently, we developed a P. putida KT2440 markerless gene deletion method based on recombineering and Cre/loxP site-specific recombination. PCR-based λ Red recombineering circumvents the tedious cloning steps and is more amenable to high-throughput manipulation. Here we report an improved scarless gene deletion strategy based on recombineering and intron-encoded homing endonuclease I-SceI-mediated double-strand break repair. Sixteen drug exporter gene(s) were deleted and the minimal inhibition concentrations of the mutants to a variety of antibiotics were determined. The robustness of the procedure was also demonstrated by sequential deletion of five large genomic regions. Up to 59% recombination efficiency was achieved for a 54.8 kb deletion, and the efficiency of RecA-mediated double-strand break repair, which was boosted by λ Red recombinase, was nearly 100%. The strain with a 3.76% genome reduction showed an improved growth rate and transformation efficiency. The straightforward, time-saving and highly efficient scarless deletion approach has the potential to facilitate the genetic study, and biotechnological and environmental applications of P. putida KT2440. Coupled action of λ Red recombineering and homing endonuclease I-SceI-mediated double-strand break repair for Pseudomonas putida KT2440 scarless gene deletion.

Mitotic recombination is the predominant mechanism for repairing double-strand breaks in Saccharomyces cerevisiae. Current recombination models are largely based on studies utilizing the enzyme I-SceI or HO to create a site-specific break, each of which generates broken ends with 3′ overhangs. In this study sequence-diverged ectopic substrates were used to assess whether the frequent Pol δ-mediated removal of a mismatch 8 nucleotides from a 3′ end affects recombination outcomes and whether the presence of a 3′ vs. 5′ overhang at the break site alters outcomes. Recombination outcomes monitored were the distributions of recombination products into crossovers vs. noncrossovers, and the position/length of transferred sequence (heteroduplex DNA) in noncrossover products. A terminal mismatch that was 22 nucleotides from the 3′ end was rarely removed and the greater distance from the end did not affect recombination outcomes. To determine whether the recombinational repair of breaks with 3′ vs. 5′ overhangs differs, we compared the well-studied 3′ overhang created by I-SceI to a 5′ overhang created by a ZFN (Zinc Finger Nuclease). Initiation with the ZFN yielded more recombinants, consistent with more efficient cleavage and potentially faster repair rate relative to I-SceI. While there were proportionally more COs among ZFN- than I-SceI-initiated events, NCOs in the two systems were indistinguishable in terms of the extent of strand transfer. These data demonstrate that the method of DSB induction and the resulting differences in end polarity have little effect on mitotic recombination outcomes despite potential differences in repair rate.

Transgenesis with the meganuclease I-SceI is a safe and efficient method, but the underlying mechanisms remain unclear due to the lack of information on transgene localization. Using I-SceI, we previously developed a transgenic Xenopus tropicalis line expressing enhanced green fluorescent protein driven by the neural crest-specific snai2 promoter/enhancer, which is a powerful tool for studying neural crest development and craniofacial morphogenesis. Here, we carried out whole-genome shotgun sequencing for the snai2:eGFP embryos to identify the transgene integration sites. With a 19x sequencing coverage, we estimated that 6 copies of the transgene were inserted into the Xenopus tropicalis genome in the hemizygous transgenic embryos. Two transgene integration loci adjacent to each other were identified in a noncoding region on chromosome 1, possibly as a result of duplication after a single transgene insertion. Interestingly, genomic DNA at the boundaries of the transgene integration loci contains short sequences homologous to the I-SceI recognition site, suggesting that the integration was not random but probably mediated by sequence homology. To our knowledge, our work represents the first genome-wide sequencing study on a transgenic organism generated with I-SceI, which is useful for evaluating the potential genetic effects of I-SceI-mediated transgenesis and further understanding the mechanisms underlying this transgenic method.

The methylotrophic yeast belongs to the group of homothallic fungi that are able to spontaneously change their mating type by inversion of chromosomal DNA in the MAT locus region. As a result, natural and genetically engineered cultures of these yeasts typically contain a mixture of sexually dimorphic cells that are prone to self-diploidisation and spore formation accompanied by genetic rearrangements. These characteristics pose a significant challenge to the development of genetically stable producers for industrial use. In the present study, we constructed heterothallic strains of , ensuring a constant mating type by unifying the genetic sequences in the active and silent MAT loci. To obtain such strains, we performed site-directed inactivation of one of the two yeast MAT loci, replacing its sequence with a selective HIS4 gene surrounded by I-SceI meganuclease recognition sites. We then used transient expression of the SCE1 gene, encoding a recombinant I-SceI meganuclease, to induce site-specific cleavage of HIS4, followed by damage repair by homologous recombination in mutant cells. As a result, heterothallic strains designated 'Y-727-2(alpha)' and 'Y-727-9(a)', which correspond to the α and mating type, respectively, were obtained. The strains demonstrated a loss of the ability to self-diploidize. The results of PCR and whole genome analysis confirmed the identity of the contents of the MAT loci. Analysis of the genomes of the final strains, however, revealed a fusion of chromosome 3 and chromosome 4 in strain Y-727-2(alpha)-1. This finding was subsequently confirmed by pulsed-field gel electrophoresis of yeast chromosomes. However, the ability of the Y-727-2(alpha)-derived producers to efficiently secrete recombinant β-galactosidase was unaffected by this genomic rearrangement.

Tolerance breeding through genetic engineering, sequence and omics analyses, and gene identification processes are widely used to synthesize biofuels. The majority of related mechanisms have been shown to yield endogenous genes with high expression. However, the process was time-consuming and labor-intensive, meaning there is a need to address the problems associated with the low-throughput screening method and significant time and money consumption. In this study, a combination of the limit screening method (LMS method) and product-tolerance engineering was proposed and applied. The Escherichia coli MG1655 genomic DNA library was constructed using the shotgun method. Then, the cultures were incubated at concentrations of 0.25%, 0.5%, 0.75% and 1.0% of pinene with different inhibitory effects. Finally, the genes acrB, flgFG, motB and ndk were found to be associated with the enhanced tolerance of E. coli to pinene. Using the I-SceI cleavage system, the promoters of acrB, flgFG and ndk genes were replaced with P37. The final strain increased the production of pinene from glucose by 2.1 times.