Explore the vast range of titles available.

PurposeOverweight and obesity are major public health concerns worldwide which are associated with a low-grade chronic inflammation. Dietary fiber as an important component of diet could be effective in controlling weight and inflammatory factors. The present study aimed to compare the effects of rice husk powder and rice bran on inflammatory factors along with an energy-restricted diet in overweight and obese adults.MethodsIn this randomized trial, 105 eligible individuals were assigned to one of the three energy-restricted diet groups receiving; rice bran (n = 35), rice husk powder (n = 35), and control group (n = 35) for 12 weeks. Demographic data, dietary intake, anthropometric indices and inflammatory factors (serum levels of IL-6 and hs-CRP) were measured at baseline and at the end of the study.ResultsWeight, BMI and waist circumference reduced significantly in all groups after 12 weeks of study (P < 0.01 for all). However, pre- and post-measure differences between groups were not significant. Moreover, serum levels of hs-CRP and IL-6 were not significantly different between participants in the rice bran or rice husk groups. However, the reduction in serum levels of hs-CRP in rice husk (mean change = − 0.14 ± 0.05 µg/ml) and rice bran (mean change = − 0.13 ± 0.03 µg/ml) was significantly higher when compared to the control group (mean change = − 0.03 ± 0.02 µg/ml) (P < 0.05 for both groups). The same pattern was found when changes in IL-6 serum levels of participants in rice husk (mean change = − 0.48 ± 0.11 pg/ml) and rice bran (mean change = − 0.57 ± 0.13 pg/ml) groups were compared to the control group (mean change= − 0.19 ± 0.07 pg/ml) (P < 0.05 for both groups).ConclusionThe results of this study showed positive effects of rice bran and rice husk powder supplementation, combined with an energy-restricted diet, on inflammatory markers among overweight and obese adults.

Petroleum industry is one of the fastest growing industries, and it significantly contributes to economic growth in developing countries like India. The wastewater from a petroleum industry consist a wide variety of pollutants like petroleum hydrocarbons, mercaptans, oil and grease, phenol, ammonia, sulfide, and other organic compounds. All these compounds are present as very complex form in discharged water of petroleum industry, which are harmful for environment directly or indirectly. Some of the techniques used to treat oily waste/wastewater are membrane technology, photocatalytic degradation, advanced oxidation process, electrochemical catalysis, etc. In this review paper, we aim to discuss past and present scenario of using various treatment technologies for treatment of petroleum industry waste/wastewater. The treatment of petroleum industry wastewater involves physical, chemical, and biological processes. This review also provides scientific literature on knowledge gaps and future research directions to evaluate the effect(s) of various treatment technologies available.

The rapid growth of population and industrialization have intensified the problem of water pollution globally. To meet the challenge of industrialization, the use of synthetic dyes in the textile industry, dyeing and printing industry, tannery and paint industry, paper and pulp industry, cosmetic and food industry, dye manufacturing industry, and pharmaceutical industry has increased exponentially. Among these industries, the textile industry is prominent for the water pollution due to the hefty consumption of water and discharge of coloring materials in the effluent. The discharge of this effluent into the aquatic reservoir affects its biochemical oxygen demand (BOD), chemical oxygen demand (COD), total dissolved solids (TDS), total suspended solids (TSS), and pH. The release of the effluents without any remedial treatment will generate a gigantic peril to the aquatic ecosystem and human health. The ecological-friendly treatment of the dye-containing wastewater to minimize the detrimental effect on human health and the environment is the need of the hour. The purpose of this review is to evaluate the catastrophic effects of textile dyes on human health and the environment. This review provides a comprehensive insight into the dyes and chemicals used in the textile industry, focusing on the typical treatment processes for their removal from industrial wastewaters, including chemical, biological, physical, and hybrid techniques.

In developing countries, one of the most severe modern-day dilemmas is the management of industrial wastewater. In these countries, industrial wastewater effluents are directly discharged into the natural drain, a sewer system, an internal septic tank or a nearby field. Some of these industrial wastewater effluents are inadequately treated or untreated before being discharged. In recent years, in developing countries, urbanization and industrial activities have led to environmental deterioration. This paper was designed to review the health and environmental impacts of inadequately treated or untreated industrial wastewater effluents in Pakistan. The quality of industrial wastewater effluents is responsible for the degradation of the receiving water bodies. This is due to the reason that inadequately treated or untreated industrial wastewater effluents may cause eutrophication in the receiving water bodies and also form a favorable condition for toxin-producing waterborne pathogens. In order to comply with the wastewater guidelines and legislations, there is a need for proper treatment before discharge. In order to minimize the risk to the environment and public health, there is a need for proper treatment processes for industrial wastewater effluents. To achieve unpolluted discharge of industrial wastewater into the receiving water bodies, regular monitoring, proper and suitable treatment, careful planning and appropriate legislation are recommended.

There is growing concern worldwide about the role of polluted soil and water environments in the development and dissemination of antibiotic resistance. Our aim in this study was to identify management options for reducing the spread of antibiotics and antibiotic-resistance determinants via environmental pathways, with the ultimate goal of extending the useful life span of antibiotics. We also examined incentives and disincentives for action. We focused on management options with respect to limiting agricultural sources; treatment of domestic, hospital, and industrial wastewater; and aquaculture. We identified several options, such as nutrient management, runoff control, and infrastructure upgrades. Where appropriate, a cross-section of examples from various regions of the world is provided. The importance of monitoring and validating effectiveness of management strategies is also highlighted. Finally, we describe a case study in Sweden that illustrates the critical role of communication to engage stakeholders and promote action. Environmental releases of antibiotics and antibiotic-resistant bacteria can in many cases be reduced at little or no cost. Some management options are synergistic with existing policies and goals. The anticipated benefit is an extended useful life span for current and future antibiotics. Although risk reductions are often difficult to quantify, the severity of accelerating worldwide morbidity and mortality rates associated with antibiotic resistance strongly indicate the need for action.

Turning cast-off shells into nitrogen-rich chemicals would benefit economies and the environment, say Ning Yan and Xi Chen.

Electrocoagulation (EC) is one of the emerging technologies in groundwater and wastewater treatment as it combines the benefits of coagulation, sedimentation, flotation, and electrochemical oxidation processes. Extensive research efforts implementing EC technology have been executed over the last decade to treat chemical oxygen demand (COD)-rich industrial wastewaters with the aim to protect freshwater streams (e.g., rivers, lakes) from pollution. A comprehensive review of the available recent literature utilizing EC to treat wastewater with high COD levels is presented. In addition, recommendations are provided for future studies to improve the EC technology and broaden its range of application. This review paper introduces some technologies which are often adopted for industrial wastewater treatment. Then, the EC process is compared with those techniques as a treatment for COD-rich wastewater. The EC process is considered as the most privileged technology by different research groups owing to its ability to deal with abundant volumes of wastewater. After, the application of EC as a single and combined treatment for COD-rich wastewaters is thoroughly reviewed. Finally, this review attempts to highlight the potentials and limitations of EC. Related to the EC process in batch operation mode, the best operational conditions are found at 10 V and 60 min of voltage and reaction time, respectively. These last values guarantee high COD removal efficiencies of > 90%. This review also concludes that considerably large operation costs of the EC process appears to be the serious drawback and renders it as an unfeasible approach for handling of COD rich wastewaters. In the end, this review has attempted to highlights the potential and limitation of EC and suggests that vast notably research in the field of continuous flow EC system is essential to introduce this technology as a convincing wastewater technology.

Dyes are used in various industries as coloring agents. The discharge of dyes, specifically synthetic dyes, in wastewater represents a serious environmental problem and causes public health concerns. The implementation of regulations for wastewater discharge has forced research towards either the development of new processes or the improvement of available techniques to attain efficient degradation of dyes. Catalytic oxidation is one of the advanced oxidation processes (AOPs), based on the active radicals produced during the reaction in the presence of a catalyst. This paper reviews the problems of dyes and hydroxyl radical-based oxidation processes, including Fenton’s process, non-iron metal catalysts, and the application of thin metal catalyst-coated tubular reactors in detail. In addition, the sulfate radical-based catalytic oxidation technique has also been described. This study also includes the effects of various operating parameters such as pH, temperature, the concentration of the oxidant, the initial concentration of dyes, and reaction time on the catalytic decomposition of dyes. Moreover, this paper analyzes the recent studies on catalytic oxidation processes. From the present study, it can be concluded that catalytic oxidation processes are very active and environmentally friendly methods for dye removal.

Low levels of pharmaceuticals are detected in surface, ground, and drinking water worldwide. Usage and incorrect disposal have been considered the major environmental sources of these microcontaminants. Recent publications, however, suggest that wastewater from drug production can potentially be a source of much higher concentrations in certain locations. The present study investigated the environmental fate of active pharmaceutical ingredients in a major production area for the global bulk drug market. Water samples were taken from a common effluent treatment plant near Hyderabad, India, which receives process water from approximately 90 bulk drug manufacturers. Surface water was analyzed from the recipient stream and from two lakes that are not contaminated by the treatment plant. Water samples were also taken from wells in six nearby villages. The samples were analyzed for the presence of 12 pharmaceuticals with liquid chromatography‐mass spectrometry. All wells were determined to be contaminated with drugs. Ciprofloxacin, enoxacin, cetirizine, terbinafine, and citalopram were detected at more than 1 μg/L in several wells. Very high concentrations of ciprofloxacin (14 mg/L) and cetirizine (2.1 mg/L) were found in the effluent of the treatment plant, together with high concentrations of seven additional pharmaceuticals. Very high concentrations of ciprofloxacin (up to 6.5 mg/L), cetirizine (up to 1.2 mg/L), norfloxacin (up to 0.52 mg/L), and enoxacin (up to 0.16 mg/L) were also detected in the two lakes, which clearly shows that the investigated area has additional environmental sources of insufficiently treated industrial waste. Thus, insufficient wastewater management in one of the world's largest centers for bulk drug production leads to unprecedented drug contamination of surface, ground, and drinking water. This raises serious concerns regarding the development of antibiotic resistance, and it creates a major challenge for producers and regulatory agencies to improve the situation.

Through its important role in the formation of particulate matter, atmospheric ammonia affects air quality and has implications for human health and life expectancy 1 , 2 . Excess ammonia in the environment also contributes to the acidification and eutrophication of ecosystems 3 – 5 and to climate change 6 . Anthropogenic emissions dominate natural ones and mostly originate from agricultural, domestic and industrial activities 7 . However, the total ammonia budget and the attribution of emissions to specific sources remain highly uncertain across different spatial scales 7 – 9 . Here we identify, categorize and quantify the world’s ammonia emission hotspots using a high-resolution map of atmospheric ammonia obtained from almost a decade of daily IASI satellite observations. We report 248 hotspots with diameters smaller than 50 kilometres, which we associate with either a single point source or a cluster of agricultural and industrial point sources—with the exception of one hotspot, which can be traced back to a natural source. The state-of-the-art EDGAR emission inventory 10 mostly agrees with satellite-derived emission fluxes within a factor of three for larger regions. However, it does not adequately represent the majority of point sources that we identified and underestimates the emissions of two-thirds of them by at least one order of magnitude. Industrial emitters in particular are often found to be displaced or missing. Our results suggest that it is necessary to completely revisit the emission inventories of anthropogenic ammonia sources and to account for the rapid evolution of such sources over time. This will lead to better health and environmental impact assessments of atmospheric ammonia and the implementation of suitable nitrogen management strategies. Satellite observations reveal over 200 ammonia hotspots associated with agricultural and industrial point sources, which emit much larger quantities of ammonia to the atmosphere than previously thought.