Explore the vast range of titles available.

Evaluation of design artefacts and design theories is a key activity in Design Science Research (DSR), as it provides feedback for further development and (if done correctly) assures the rigour of the research. However, the extant DSR literature provides insufficient guidance on evaluation to enable Design Science Researchers to effectively design and incorporate evaluation activities into a DSR project that can achieve DSR goals and objectives. To address this research gap, this research paper develops, explicates, and provides evidence for the utility of a Framework for Evaluation in Design Science (FEDS) together with a process to guide design science researchers in developing a strategy for evaluating the artefacts they develop within a DSR project. A FEDS strategy considers why, when, how, and what to evaluate. FEDS includes a two-dimensional characterisation of DSR evaluation episodes (particular evaluations), with one dimension being the functional purpose of the evaluation (formative or summative) and the other dimension being the paradigm of the evaluation (artificial or naturalistic). The FEDS evaluation design process is comprised of four steps: (1) explicate the goals of the evaluation, (2) choose the evaluation strategy or strategies, (3) determine the properties to evaluate, and (4) design the individual evaluation episode(s). The paper illustrates the framework with two examples and provides evidence of its utility via a naturalistic, summative evaluation through its use on an actual DSR project.

This paper addresses the ‘network’ and ‘open innovation’ paradigms by seeking to examine the factors associated with structural positioning within university–industry networks. Drawing upon a network analysis of knowledge-based ties held by universities across the regions of the UK, it is found that those universities with the most central positions (network centrality) within university–industry network structures also have high rates of relational involvement in activities such as spin-off generation and engagement in externally funded research projects. Some forms of activity, in particular intellectual property protection through patenting, are found to be negatively associated with centrality. Spatial location is largely found to be unrelated to the network centrality of universities. By utilising network centrality as one measure of the open innovation capability of universities, the paper indicates that a range of institutional characteristics and factors tend to either promote or limit the engagement of universities in open innovation practices.

The process that turns knowledge into innovation is highly ambiguous and complex. This study merges economic and management perspectives to extend the knowledge spillover theory of entrepreneurship in explaining how the knowledge spillover construction circle works. At this aim it introduces the model of ‘latent and emergent entrepreneurship’ evidencing the strategic role of the entrepreneur in each step of the process that goes from the research of new knowledge to its commercialization.

The promotion of sustainable and healthy mobility among older adults (≥ 65 years) is an important challenge. E-bikes may be part of the solution, but research about e-bike use among older adults is scarce. The current study aims to examine e-bikes’ purchase reasons, benefits and disadvantages, purposes and amount of use, substitution effects and crash characteristics among older e-bike users. Additionally, it examines differences between men and women. In Flanders (Belgium), 357 older e-bike users completed an online- or interview-version of the same questionnaire. Among men and women, the most prevalent reason for e-bike purchase was to bike with less effort (24.1%). The most important benefit of e-bike use was to be able to bike longer distances (35.0%). E-bikes’ heavy weight was the most frequently reported disadvantage (33.3%). Men more frequently reported battery issues, but also that they do not experience any disadvantage. Women more frequently reported fear of falling/injuries. Participants used their e-bikes for various purposes. Men more frequently reported to cycle for recreation alone while women used the e-bike more for social reasons. E-bikes predominantly replaced trips by conventional bike (72.0%) and car (50.7%). About one quarter (27.5%) had experienced an e-bike crash, most frequently caused by an uneven or slippery surface (26.5%). To promote active ageing, policy initiatives could include strategies aimed at stimulating e-bike use. These strategies should focus on emphasizing the identified benefits, reducing the disadvantages and increasing e-bike safety. Research in countries with less favorable cycling cultures is necessary to confirm current findings.

In recent years, a growing body of research has been emerging that focuses on changes in travel behaviour over an individual’s life course. It has been labelled the ‘mobility biographies approach’ and highlights changes in travelling induced by key events and experiences in an individual’s life course. In this context residential relocation plays an important role. This paper examines changes in travel mode use after residential relocations using structural equation modelling. It draws on retrospectively recorded empirical data collected in the region of Cologne. The findings show that relocations and associated changes in the built environment induce significant changes in car ownership and travel mode use and thus may be regarded as key events in an individual’s mobility biography. Changes in levels of satisfaction with attributes of the built environment have a significant impact in this context as well. The causal direction of the changes fulfils expectations: suburbanisation is followed by increases in car use and decreases in public transport use, bicycle use and walking. The opposite is true for relocations into the city. In addition, changes in household structure that tend to go along with relocation have significant effects. The findings provide further evidence for the built environment having a causal impact on mode use: modal changes temporally follow changes in the built environment and thus appear to be adjustments to the new spatial setting.

A large amount of information is required to model the complex trade-off processes between travel activities, non-travel activities and budget assignment at the individual level. This paper describes the development of a new survey design, which incorporates components of travel surveys, time use surveys and consumer expenditure surveys in an integrated format, which is expected to deliver a richer data set allowing deeper insights into individuals’ activity and consumption patterns. The survey procedure and the incentives paid, which were necessary to obtain acceptable response rates, are also described. Results from two pilot studies using a trip-based and an activity-based diary format are presented. The paper examines to which extent the diaries have been capable of collecting the required data with high quality and response rates. The innovative “Mobility–Activity–Expenditure-Diary” is introduced and results of the main survey using this design are presented. Travel behaviour and non-travel activities were reported at high quality. Expenditures would require longer observation periods (and preferably not only telephone but also personal support in the survey process) to reduce unsystematic variations and to better capture individuals’ long term equilibrium.

Assuming freight trip generation as the total number of freight vehicles arriving to retail establishments, for loading/unloading purposes and within a defined time period, we experiment and compare four alternative modeling methodologies to predict freight trip generation. The aim is to achieve better freight trip generation models, thus contributing to improving the chances of correctly dimension, for example, the parking infrastructure required to accommodate demand, or estimating the freight traffic impacts at micro level. Representing the state of the practice, the first two methodologies are based on cross-classification/category analysis. The third methodology uses a generalized linear model specification, a robust alternative to ordinary least squares linear regression. The fourth methodology consists in the exploration of a dependent variable simplification using an Ordinal Logit model. The main source of data is an Establishment-based Freight Survey, which collected data from 604 retail establishments in the city of Lisbon, Portugal. The selected independent variables were the establishments’ industry category, number of employees and retail area. The analysis allowed for the conclusion that (a) variable contribution varies depending on the chosen modelling methodology, (b) there is little variability in the quality of predictions depending on the selected model, but a considerable improvement in correct predictions can be achieved by reducing the variability of the dependent variable, and (c) the proposed indicator framework is suitable to compare model predictions and might be adequately represented by subset of those applied.

This book aims to shed light on the potentially innovative ICT (information and communication technology) architectures from an East Asian regional perspective.The business environment brought about by the development of ICT intensified global competition and caused dramatic changes in the industrial architecture.

The household travel survey (HTS) finds itself in the midst of rapid technological change. Traditional methods are increasingly being sidelined by digital devices and computational power—for tracking movements, automatically detecting modes and activities, facilitating data collection, etc.. Smartphones have recently emerged as the latest technological enhancement. FMS is a smartphone-based prompted-recall HTS platform, consisting of an app for sensor data collection, a backend for data processing and inference, and a user interface for verification of inferences (e.g., modes, activities, times, etc.). FMS, has been deployed in several cities of the global north, including Singapore. This paper assesses the first use of FMS in a city of the global south, Dar es Salaam. FMS in Dar was implemented over a 1-month period, among 581 adults chosen from 300 randomly selected households. Individuals were provided phones with data plans and the FMS app preloaded. Verification of the collected data occurred every 3 days, via a phone interview. The experiment reveals various social and technical challenges. Models of individual likelihood to participate suggest little bias. Several socioeconomic and demographic characteristics apparently do influence, however, the number of days fully verified per individual. Similar apparent biases emerge when predicting the likelihood of a given day being verified. Some risk of non-random, non-response is, thus, evident.

A model of traveller behaviour should recognise the exogenous and endogenous factors that limit the choice set of users. These factors impose constraints on the decision maker, which constraints may be considered implicitly, as soft constraints imposing thresholds on the perception of changes in attribute values, or explicitly as hard constraints. The purpose of this paper is twofold: (1) To present a constrained nested logit-type choice model to cope with hard constraints. This model is derived from the entropy-maximizing framework. (2) To describe a general framework to deal with (dynamic) non-linear utilities. This approach is based on Reproducing Kernel Hilbert Spaces. The resulting model allows the dynamic aspect and the constraints on the choice process to be represented simultaneously. A novel estimation procedure is introduced in which the utilities are viewed as the parameters of the proposed model instead of attribute weights as in the classical linear models. A discussion on over-specification of the proposed model is presented. This model is applied to a synthetic test problem and to a railway service choice problem in which users choose a service depending on the timetable, ticket price, travel time and seat availability (which imposes capacity constraints). Results show (1) the relevance of incorporating constraints into the choice models, (2) that the constrained models appear to be a better fit than the counterpart unconstrained choice models; and (3) the viability of the approach, in a real case study of railway services on the Madrid–Seville corridor (Spain).