Explore the vast range of titles available.

The January 2022 Hunga Tonga–Hunga Ha’apai eruption was one of the most explosive volcanic events of the modern era, producing a vertical plume that peaked more than 50 km above the Earth. The initial explosion and subsequent plume triggered atmospheric waves that propagated around the world multiple times. A global-scale wave response of this magnitude from a single source has not previously been observed. Here we show the details of this response, using a comprehensive set of satellite and ground-based observations to quantify it from surface to ionosphere. A broad spectrum of waves was triggered by the initial explosion, including Lamb waves propagating at phase speeds of 318.2 ± 6 m s^(−1) at surface level and between 308 ± 5 to 319 ± 4 m s^(−1) in the stratosphere, and gravity waves propagating at 238 ± 3 to 269 ± 3 m s^(−1) in the stratosphere. Gravity waves at sub-ionospheric heights have not previously been observed propagating at this speed or over the whole Earth from a single source. Latent heat release from the plume remained the most significant individual gravity wave source worldwide for more than 12 h, producing circular wavefronts visible across the Pacific basin in satellite observations. A single source dominating such a large region is also unique in the observational record. The Hunga Tonga eruption represents a key natural experiment in how the atmosphere responds to a sudden point-source-driven state change, which will be of use for improving weather and climate models.

The summer of 2018 was an extraordinary season in climatological terms for northern and central Europe, bringing simultaneous, widespread, and concurrent heat and drought extremes in large parts of the continent with extensive impacts on agriculture, forests, water supply, and the socio-economic sector. Here, we present a comprehensive, multi-faceted analysis of the 2018 extreme summer in terms of heat and drought in central and northern Europe, with a particular focus on Germany. The heatwave first affected Scandinavia in mid-July and shifted towards central Europe in late July, while Iberia was primarily affected in early August. The atmospheric circulation was characterized by strongly positive blocking anomalies over Europe, in combination with a positive summer North Atlantic Oscillation and a double jet stream configuration before the initiation of the heatwave. In terms of possible precursors common to previous European heatwaves, the Eurasian double-jet structure and a tripolar sea surface temperature anomaly over the North Atlantic were already identified in spring. While in the early stages over Scandinavia the air masses at mid and upper levels were often of a remote, maritime origin, at later stages over Iberia the air masses primarily had a local-to-regional origin. The drought affected Germany the most, starting with warmer than average conditions in spring, associated with enhanced latent heat release that initiated a severe depletion of soil moisture. During summer, a continued precipitation deficit exacerbated the problem, leading to hydrological and agricultural drought. A probabilistic attribution assessment of the heatwave in Germany showed that such events of prolonged heat have become more likely due to anthropogenic global warming. Regarding future projections, an extreme summer such as that of 2018 is expected to occur every 2 out of 3 years in Europe in a +1.5 ∘C warmer world and virtually every single year in a +2 ∘C warmer world. With such large-scale and impactful extreme events becoming more frequent and intense under anthropogenic climate change, comprehensive and multi-faceted studies like the one presented here quantify the multitude of their effects and provide valuable information as a basis for adaptation and mitigation strategies.

The sea surface temperature (SST) distribution can modulate the development of extratropical cyclones through sensible and latent heat fluxes. However, the direct and indirect effects of these surface fluxes, and thus the SST, are still not well understood. This study tackles this problem using idealized channel simulations of moist baroclinic development under the influence of surface fluxes. The model is initialized with a zonal wind field resembling the midlatitude jet and a different SST distribution for each experiment, where the absolute SST, the SST gradient, and the meridional position of the SST front are varied. The surface latent heat flux associated with the absolute SST plays a key role in enhancing the moist baroclinic development, while the sensible heat fluxes associated with the SST gradient play a minor role that can be detrimental for the development of the cyclone. The additional moisture provided by the latent heat fluxes originates from about 1000 km ahead of the cyclone a day prior to the time of the most rapid deepening. When the SST in this region is higher than 16°C, the additional latent heat is conducive for explosive cyclone development. For SSTs above 20°C, the cyclones feature characteristics of hybrid cyclones with latent heat release close to their core, maintaining their intensity for a longer period due to continuous and extensive moisture supply from the surface. A high absolute SST with a weak SST gradient, however, can lead to a delay of the deepening stage, because of unorganized convection at early stages reducing environmental baroclinicity.

The extratropical transition (ET) of tropical cyclones often has an important impact on the nature and predictability of the midlatitude flow. This review synthesizes the current understanding of the dynamical and physical processes that govern this impact and highlights the relationship of downstream development during ET to high-impact weather, with a focus on downstream regions. It updates a previous review from 2003 and identifies new and emerging challenges and future research needs. First, the mechanisms through which the transitioning cyclone impacts the midlatitude flow in its immediate vicinity are discussed. This “direct impact” manifests in the formation of a jet streak and the amplification of a ridge directly downstream of the cyclone. This initial flow modification triggers or amplifies a midlatitude Rossby wave packet, which disperses the impact of ET into downstream regions (downstream impact) and may contribute to the formation of high-impact weather. Details are provided concerning the impact of ET on forecast uncertainty in downstream regions and on the impact of observations on forecast skill. The sources and characteristics of the following key features and processes that may determine the manifestation of the impact of ET on the midlatitude flow are discussed: the upper-tropospheric divergent outflow, mainly associated with latent heat release in the troposphere below, and the phasing between the transitioning cyclone and the midlatitude wave pattern. Improving the representation of diabatic processes during ET in models and a climatological assessment of the ET’s impact on downstream high-impact weather are examples for future research directions.

A diagnostic analysis reveals that on the interannual time scale the southeast–northwest movement is a dominant feature of the South Asian high (SAH), and it is closely related to the Indian and East Asian summer monsoon rainfall. The southeastward (northwestward) shift of the SAH is closely related to less (more) Indian summer monsoon rainfall and more (less) rainfall in the Yangtze River valley (YRV) over the East Asian summer monsoon region. An anomalous AGCM is utilized to examine the effect of latent heat anomalies associated with the Asian summer monsoon rainfall on the SAH. The negative latent heat anomalies over the northern Indian Subcontinent associated with a weak Indian summer monsoon stimulates an anomalous cyclone to its northwest and an anticyclone to its northeast over the eastern Tibetan Plateau and eastern China in the upper troposphere, which is responsible for the east–west shift of the SAH and more rainfall in the YRV. The positive latent heat release associated with rainfall anomalies in the YRV excites a southward-located anticyclone over eastern China, exerting a feedback effect on the SAH and leading to a southeast–northwest shift of the SAH.

The impact of anthropogenic aerosols on clouds is a leading source of uncertainty in estimating the effect of human activity on the climate system. The challenge lies in the scale difference between clouds (~1–10 km) and general circulation and climate (>1,000 km). To address this, we use convection-permitting simulations conducted in a long and narrow domain, to resolve convection while also including a representation of large-scale processes. We examine a set of simulations that include a sea surface temperature gradient—which drives large-scale circulation—and compare these with simulations that include no gradient. We show that the effective radiative forcing due to aerosol–cloud interactions is strongly enhanced by adjustments of large-scale circulation to aerosol. We find that an increase in aerosol concentration suppresses precipitation in shallow-convective regions, which enhances water vapour transport to the portion of the domain dominated by deep convection. The subsequent increase in latent heat release in deep-convective regions strengthens the overturning circulation and surface evaporation. These changes can explain the increase in cloudiness under higher aerosol concentrations and, consequently, the large aerosol radiative effect. This work highlights the fundamental importance of large-scale circulation adjustments in understanding the effective radiative forcing from aerosol–cloud interactions.Convection-permitting simulations suggest that the radiative impact of aerosol–cloud interactions is enhanced by adjustments to large-scale circulation, which increase cloudiness.

This study investigates the transition from current practical predictability of midlatitude weather to its intrinsic limit. For this purpose, estimates of the current initial condition uncertainty of 12 real cases are reduced in several steps from 100% to 0.1% and propagated in time with a global numerical weather prediction model (ICON at 40 km resolution) that is extended by a stochastic convection scheme to better represent error growth from unresolved motions. With the provision that the perfect model assumption is sufficiently valid, it is found that the potential forecast improvement that could be obtained by perfecting the initial conditions is 4–5 days. This improvement is essentially achieved with an initial condition uncertainty reduction by 90% relative to current conditions, at which point the dominant error growth mechanism changes: With respect to physical processes, a transition occurs from rotationally driven initial error growth to error growth dominated by latent heat release in convection and due to the divergent component of the flow. With respect to spatial scales, a transition from large-scale up-amplitude error growth to a very rapid initial error growth on small scales is found. Reference experiments with a deterministic convection scheme show a 5%–10% longer predictability, but only if the initial condition uncertainty is small. These results confirm that planetary-scale predictability is intrinsically limited by rapid error growth due to latent heat release in clouds through an upscale-interaction process, while this interaction process is unimportant on average for current levels of initial condition uncertainty.

The impacts of summer atmospheric heat source over the Tibetan Plateau (TP) on regional climate variation have attracted extensive attention. However, few studies have focused on possible causes of the interannual variation of atmospheric heat source over the TP. Total heat (TH) is generally composed of three components: surface sensible heat, latent heat release of condensation (LH), and radiative convergence. In this study, it is found that interannual variation of summer TH is dominated by LH in the central and eastern TP. The atmospheric circulation patterns associated with the TH over the TP in June are different from those in July and August. Large TH is accompanied by a cyclone centered over the South China Sea in June, which is replaced by an anticyclone in July and August. The interannual variation of July–August TH over the central and eastern TP is significantly affected by convection around the western Maritime Continent (WMC) that modulates the LH over the southeastern TP. Enhanced WMC convection induces an anticyclone to the south of the TP, which favors water vapor transport to the southeastern TP and thus an increase in precipitation. Enhanced convection over the southeastern TP may exert a positive feedback on local precipitation through pumping more water vapor from the southern boundary. Both observations and model simulations indicate that the enhanced WMC convection can induce the anticyclone to the south of the TP and convection–circulation is important for maintenance of the anticyclone.

In late June 2021, western North America, and in particular the Pacific Northwest experienced a heatwave with temperatures usually only encountered in hot desert climates. Using a blend of reanalysis data and Earth System Model (ESM) simulations, we disentangle the physical drivers underlying this exceptional event. Our analysis highlights the role of the anticyclonic circulation aloft, which converted previously gained potential energy—some of which by intense latent heating thousands of kilometers upwind over the North Pacific—back into sensible heat through subsidence. We demonstrate that this upwind latent heat release did not only result in a hot troposphere above the heatwave region, but also contributed directly to escalating near‐surface temperatures. Facilitated by the mountainous terrain and dry soils in the region, deep atmospheric boundary layers were established over the course of several days, connecting the air close to Earth's surface to a massive heat reservoir many kilometers above. Anomalous soil moisture acted to raise the heatwave temperatures by 3°C in a large region during the peak of the event, with local anomalies exceeding 5°C. Overall, we conclude that this heatwave was the outcome of an intricate interplay between dynamic and thermodynamic processes. ESM experiments suggest that the same large‐scale atmospheric circulation fueled by enhanced thermodynamic drivers, such as more available moisture for condensation upwind, could enable even more extreme near‐surface temperatures, in particular in a warmer climate. Plain Language Summary In late June 2021, western North America, and in particular the Pacific Northwest, experienced temperatures normally encountered in hot deserts. Our analysis highlights the role of the anticyclonic circulation aloft, whose downward spiraling air masses converted previously gained potential energy back into sensible heat. We show that in addition to heating through sinking, the air was previously heated by condensation in ascending air streams thousands of kilometers upwind, over the North Pacific. Together, these processes fostered a massive heat reservoir above the heatwave region, which contributed to escalating near‐surface temperatures through strong vertical mixing. Dry soils in the region intensified surface heating, boosting maximum temperatures in excess of 5°C. Overall, we conclude that this heatwave was the outcome of an intricate interplay of the atmospheric flow and processes such as condensational and surface heating, further exacerbated by human‐induced background warming. Our experiments suggest that if fueled by more available moisture for condensation upwind, the same large‐scale atmospheric circulation could enable even more extreme near‐surface temperatures. Key Points A strong “Omega Block” enabled the heatwave, yet near‐surface air temperatures were more extreme than suggested by the large‐scale flow Sinking air aloft previously experienced strong latent heating over the North Pacific, contributing to the high near‐surface temperatures Deep atmospheric boundary layers brought the extreme heat down to the surface, with local soil moisture effects in excess of 5°C

To investigate the effects of aerosols on lightning activity, the Weather Research and Forecasting (WRF) Model with a two-moment bulk microphysical scheme and bulk lightning model was employed to simulate a multicell thunderstorm that occurred in the metropolitan Beijing area. The results suggest that under polluted conditions lightning activity is significantly enhanced during the developing and mature stages. Electrification and lightning discharges within the thunderstorm show characteristics distinguished by different aerosol conditions through microphysical processes. Elevated aerosol loading increases the cloud droplets numbers, the latent heat release, updraft and ice-phase particle number concentrations. More charges in the upper level are carried by ice particles and enhance the electrification process. A larger mean-mass radius of graupel particles further increases non-inductive charging due to more effective collisions. In the continental case where aerosol concentrations are low, less latent heat is released in the upper parts and, as a consequence, the updraft speed is weaker, leading to smaller concentrations of ice particles, lower charging rates and fewer lightning discharges.